hold down bolts for sale, brand-new and used.

1-1 Screen Printing Equipment Based on the customers and market, our company R&D this multi-functional 1-1 screen press, it overcomes these shortages from traditional press, such as without micro-devices, only one fixed pallet, and can not put on the T-shirt, pillow, bag and so on. This press is especially suitable for printing non-woven environment-friendly shopping bags and T-shirts with small amount.

Screen Printing DIY Hobby kit This is a new CHEAP silk screen printing kit for your DIY printing business. It is

Please Call Eaton Compressor Or E-mail For Lead Time!! 937-540-1143 Model number: Model : PP10H120V3 Description

RIKON 29-201 Rikon Mortising Attachment Kit (392516)

Mast-R-Top - 3/4" thick Phenolic top will not warp, sag, swell or corrode. - Extruded aluminum track with a T-slot for standard 1/4" hex bolts and standard 3/4" miter slot. JessEm Master Fence - Heavy

This saw I picked up came to me with what looked like very new lower end gasket and very tight like new bearings, also a very clean perfect cylinder with nice piston no rings. I believe bottom end was freshly rebuilt and maybe not even run or very little so I bought rings and cylinder gasket cleaned out the bottom end with gas and assembled it. I only have what is in the picture for this saw.

BD-500 Large Base Core Drilling Machine COMPLETE with a 20 Amp Core Bore CB748 Motor (The old Black & Decker/Dewalt DW194 Coring Motor). For coring holes upto 14 inches. Includes: Large Base 12" x 16", 48" Steel Column with 36" of gear track, Drill Mount and 110 Volt 20 AMP Core Bore CB748 core drill motor.

These are actually military air cargo straps salvaged off a military trailer. There are eighteen pieces all one inch wide ranging in length from six inches on up to five feet. All are used except for two pieces which are new with hold down clamps.

This is a Southbend double stack convection. Natural gas, 115 volts. It comes 5 racks per oven.

The buyer gets one new Lexan replacement window for the Vendcraft VM150 Snack Time vending machine. The window on the left shows the window as it is shipped with a protective opaque sheet of plastic on each side which you will peel off before you install it. It is 24" by 8".

(1) VERSATILE SLIP SEAL DUNNAGE DISPENSOR / PACKING POPCORN / PACKING PEANUT DISPENSER MANY OTHER PRACTICAL USES w/ 10-1/2" CHUTE, GRAVITY FED, TOOL, Aluminum Used and very good condition. Versatile Slip Seal Dunnage Dispensor, Shipping Peanut / Shipping Popcorn Dispenser Tool, gravity-fed, with static electric-free Chute, aluminum, one-handed manual operation.

IDEAL 61-746 600 Amp Clamp-Pro Clamp Meter with True RMS Item is new, but the package has been opened. Measures up to 600AAC Non-contact voltage indicator (70V-600-VoltAC) Tapered jaws with hook tip Data hold, Auto power off, Low battery indicator CAT III-600-Volt IDEAL 61-746 Clamp-Pro Clamp Meter 600 Amp with True RMS measures up to 600AC with auto/manual ranging. It has tapered jaws w

Rotary base for 4" milling vise, includes hold down bolts. Looks virtually unused, cast iron constructon.

YOU ARE BUYING FROM A SELLER WHO HAS **ALWAYS** HAD 100% POSITIVE eBAY FEEDBACK SINCE 1999, NOT JUST IN THE PAST 12 MONTHS. BID OR BUY WITH CONFIDENCE! PLEASE READ THIS ENTIRE DESCRIPTION SO YOU UNDERSTAND EXACTLY WHAT YOU ARE BUYING!

This hand fed tabber automatically advances a 1" clear perforated acetate tab and automatically applies it anywhere on the edge of flyers or booklets up to 3/8 inch think. Make sure tabber is threaded

Minor cosmetic wear seen in pictures. Like New. Works perfectly.

You are looking at a Ridgid 40215 BC810 Top Screw Bench Chain Vise Brand New In Box + 30 Day Return Policy Make: Ridgid Part Number: 40215 Details: Ridgid 40215 Specifications: • Model No.:

You are looking at a Ridgid 40215 BC810 Top Screw Bench Chain Vise NEW No BoxSee pictures.Comes with 2 mounting bolts. + 30 Day Retu

These were used in our shop for milling jigs. They are threaded 1/2" national coarse. There is about 1/2" of thread available with the spring fully retracted.