hydraulic cylinder shaft for sale, brand-new and used.

I have a Hydraulic Cylinder used and untested. 2 1/4" x 16 1/4" with 1 "shaft . ports at both ends.

New Page 7

I have a Hydraulic Aircraft Cylinder used and untested. 2 3/4" x 14 3/4" with 3/4" shaft has threads on shaft end. port at both ends.

For Auction - 1 - ISC Model 55 Vertical Shaft Impactor (VSI). SN 55-105. We purchased this item to complete a project for a specific customer.

This is a NO RESERVE auction for: One lot of one: HYDRAULIC Cylinder 2.5X9 by ORTMAN FLUID POWER. Working Condition (I just drained the oil). Numbers on it include: Serial 773905/a S2S 7L

HYDRAULIC RAM NEVER BEEN USED ONLY HAS STORAGE SCRATCHES ON IT, 3X3X36 1/2'' END TO END CLOSED - 24'' THROUGH, PIN TO PIN CLOSED 34 1/2'' OPEN 58 1/2'' 1'' PINS, IT WILL HAVE 2 PINS WITH IT,- CYLINDER SHAFT 1 1/8'' THICK, THIS ITEM IS STRAIGHT NO DENTS OR DAMAGE, VERY CLEAN INSIDE TOOK THE PLASTIC CUPS OUT FOR PICTURES ONLY, SEE PICTURES, BUYER PAYS SHIPPING COST,, NO RETURNS ON THIS ITEM,THANK YOU

Hydraulic cylinder 89" long CENTER TO CENTER EYE 5" dia shaft 3" eye 79" barrel and is double acting New military surplus unused. Sold as is Please look at all of the pictures. Buyer must pay shipping, wt 685lbs.

Parker Hydraulic Motor/Pump, Series F11-SAE F11-012-HU-SV-S-000-000-0 (3785561)

Horiuchi Machine 1ST30X75S0 Hydraulic Cylinder 30mm Bore 75mm Stroke 7MPa / 1015 psi New 1/8 Rc (PT) Ports Body dimensions 141mm x 54mm x 39mm Total length retracted 186mm 4 tapped holes in nose on 25mm x 40mm centers for mounting Brass nose bushing O.D. 28mm Shaft Dia. 16mm Shaft threads 14mm x 1.5 Not in original packaging I pack everything very well to prevent damage.

INTERNALLY THREADED SHAFT SHAFT OD 0.890" (22.6 mm) SHAFT LENGTH AS PICTURED: 2.96" (75.2mm) METRIC PROCESS CONNECTIONS? 4 mount bolt holes co15 LOC L1

For Auction - 1 - ISC Vertical Shaft Impactor (VSI) Model 55. I bought this crusher with the intent of producing a cubical non-polishing aggregate for a customer. While the crusher was at the shop being rebuilt, the customer was purchased by another producer with their own source.

NEW Lot of Two Sheffer CLH-D2 Pneumatic Cylinder Air and Hydraulic 1/2" Shaft Up for auction is a NEW Lot of Two Sheffer CLH-D2 Pneumatic Cylinder Air and Hydraulic 1/2" Shaft . These items are brand new and still in the manufactueres packaging. Please refer to the photos below for more details on the item.

Paccar Gearmatic Winch Model 35-11-10 = Max. Lift Weight -26,600 lbs. (12000 kg) &n

Commercial Shearing M125C 171760 Hydraulic Motor Manufacturer: Commercial Shearing Part Number: M125C 171760

Sauer Danfoss (Sundstrand) Series 51 Bent-Axis Hydraulic Motor60cc Max displacement2-speed, hydraulic shiftCartridge flangeIn good used condition.This motor was removed from a machine because it was supposedly leaking. I bubble tested it with 30 PSI of air, and could not find a leak. Just in case, I removed the end cap.

Up for your consideration is a used Aeroquip/Vickers Hydraulic Cylinder. This cylinder was taken out of service in good working condition. It features adjustable cushions on the bottom side for both forward and rear positions, foot mount for ease of mounting and has a 1000 psi max pressure rating.

Royal Cylinder Hydraulic Cylinder 1.5 Bore x 6.0 Stroke x 5/8" Rod The Ram shaft is a threaded 5/8" The Bore is 1.5" The Stroke is 6" A great buy. Shipping: - Free Local Pickup Welcome - If you have any questions, call me at 404-398-8385. - We will use the shipping service of our choice.

Used removed from lighting tower. Good working condition . 12 v dc power.