hydraulic cylinder shaft for sale, brand-new and used.

I have Thousands of Manuals for Metal Working, Wood Working and Fabrication Machining. Please just ask if you are looking for a hard to find Manual. It would be a pleasure to get your Machine Up and Running Again through this Invaluable Information.

COSEN MODEL SH-460M, Semi-Automatic Swivel Head Mitering Bandsaw This semi-automatic 10" swivel head miter cutting saw features several great design characteristics for medium to high production with economical manufacturing criteria. The built-in hydraulic power-unit incorporates a quiet running pump system to allow raising/lowering of the saw head and cutting pressure adjustment in one control station.

This is a New HIGH FLOW Hydraulic pump for a Bobcat 853 with the HIGH FLOW option.

Here is a new hydraulic cylinder. Not sure of manufacture. Attached an example in the pictures from Grainger.

******Includes all electric boxes and starters, and extra blades!

Sauer Danfoss (Sundstrand) Series 51 Bent-Axis Hydraulic Motor60cc Max displacement2-speed, hydraulic shiftCartridge flangeIn good used condition.This motor was removed from a machine because it was supposedly leaking. I bubble tested it with 30 PSI of air, and could not find a leak. Just in case, I removed the end cap.

Commercial Shearing M125C 171760 Hydraulic Motor Manufacturer: Commercial Shearing Part Number: M125C 171760

This is a NO RESERVE auction for: One lot of one: HYDRAULIC Cylinder 2.5X9 by ORTMAN FLUID POWER. Working Condition (I just drained the oil). Numbers on it include: Serial 773905/a S2S 7L

AIR&HYDRAULIC POWER,INC.TOTAL L FROM SCREW TOP.5 7/8 L.8"SHAFT OUT.

HYDRAULIC RAM NEVER BEEN USED ONLY HAS STORAGE SCRATCHES ON IT, 3X3X36 1/2'' END TO END CLOSED - 24'' THROUGH, PIN TO PIN CLOSED 34 1/2'' OPEN 58 1/2'' 1'' PINS, IT WILL HAVE 2 PINS WITH IT,- CYLINDER SHAFT 1 1/8'' THICK, THIS ITEM IS STRAIGHT NO DENTS OR DAMAGE, VERY CLEAN INSIDE TOOK THE PLASTIC CUPS OUT FOR PICTURES ONLY, SEE PICTURES, BUYER PAYS SHIPPING COST,, NO RETURNS ON THIS ITEM,THANK YOU

Theory of Shrinkage and Forced Fits, Machinery's Reference Book No. 89, by William Ledyard Cathcart, originally published by The Industrial Press, New York, NY, 1912. Reprinted by Nation Builder Books, Leesburg, VA, 2006.

For Auction - 1 - ISC Model 55 Vertical Shaft Impactor (VSI). SN 55-105. We purchased this item to complete a project for a specific customer.

I have a Hydraulic Aircraft Cylinder used and untested. 2 3/4" x 14 3/4" with 3/4" shaft has threads on shaft end. port at both ends.

I have a Hydraulic Cylinder used and untested. 2 1/4" x 16 1/4" with 1 "shaft . ports at both ends.

Hydraulic cylinder 89" long CENTER TO CENTER EYE 5" dia shaft 3" eye 79" barrel and is double acting New military surplus unused. Sold as is Please look at all of the pictures. Buyer must pay shipping, wt 685lbs.

Parker Hydraulic Motor/Pump, Series F11-SAE F11-012-HU-SV-S-000-000-0 (3785561)