internal clamp for sale, brand-new and used.

(1) INTERNAL PIPE CLAMP TOOL, STEEL, 1" OD COMPRESSION CLAMP, COLLET MACHINIST TOOL Used and in very good condition, some scratch marks; works great. Steel Internal Pipe Clamp Tool, 1" OD, Machinist Tool Collet. This sale is for one (1) internal pipe clamp tool.

Standard Features Can be used on all standard weld neck flanges and great with slip-on flanges Contact points stainless steel – a standard feature One piece construction – no loose pieces Quick action operation Priced right Note: The Internal Fit-up Clamp is an alignment tool. A separate lifting device to support the flange weight is recommended. Simple Operation 1.

LOT OF 1000 PLUS 100 LAG BOLTS HUCK-CLINCH® Blind Rivets Introduction HUCK-CLINCH® Blind Rivets are a precision made aerospace Blind Rivet produced to the requirements of MIL-R-7885 and NAS1686 procurement standards. HUCK-CLINCH® Blind Rivets are available in standard and oversize diameters and with Alloy Steel or CRES spindles. The HUCK-CLINCH® Blind Rivet meets sheet take-up and hole fill requirements of the Military and Industry specifications.

HELLO, YOU ARE BIDDING ON USED Klein Tools CL1000 400A AC/D

This auction is for 1 Standard 6" Billet aluminum Machined vise stop. (DIMENSIONS FOR FITMENT) This vise is designed to mount onto the back of a 6" standard vise. This means brands like KURT, GLACERN, and any other standard 6" vise with 3.875" spacing from center to center of holes, and uses a 1/2-13 thread.

NEW SAWYER MFG. 124H-0420 CHAIN PIPE ALIGNMENT CLAMP 4 IN to 20 IN!!!!!! SEE PHOTOS!!!!!

This is a brand new, much improved, finger knob for the tightening the rear clamp on your vintage UNISAW fence. This is a easy-to-install replacement knob for tightening the rear clamp's J-hook found on the early style Delta

Is your Delta Unisaw Jet-Lock fence not "locking" the rear clamp like it should? It could be due to a damaged lever in the rear clamp casting. This part is an exact replacement for the original equipment cam lever that is located inside the casting at the rear of the rip fence.

 

Precision Brand Smooth Band Metric Worm Gear Hose Clamp, 8mm - 16mm (Pack of 10) Product Features Series 400 stainless steel band helps provide resistance

For More Goods please visit our store: http://Store.ebay.com/hiendgadget Hi-End Gadget Shop Fluke LEM HEME ISO 2000A DC AC Current Clamp 1000V Insulation Tester MultiMeter

SCTK691A-050 Clamp current transformer/200-1200A meter field calibrator Features : Clamp- structure , easy to operate High permeability nickel steel or steel, good linearity and high sensitivity Internal epoxy resin casting , good stability , light weight , easy to install Application: Applies meter field calibrator, multifunction power meter, oscilloscope For digital multimeters, clamp-on ground resistance tester double , double clamp- phase voltammetry table , etc.

BlueBiz Latest TLC2652 Weak Signal Acquisition DC Signal Amplifier Module Feature: Name: TLC2652

Pacer Water Pump — 160 GPM, 5.5 HP, 2in., Model# SEB2PL E5.5 160 max. GPM, 52 PSI max. and 120ft.

You Are Purchasing 1 (ONE) New Old Stock Schneider Electric / Square D 9070T1500D33 T Industrial Control Transformer; 380/400/415 Volt Primary, 115/230 Volt Secondary, 1500 VA, Screw Clamp Terminal, 1 Phase Ships Free Same Business Day Lower 48 States 15121240 Info From The Manufacturer Website: Product Details: