I've had these T slot bolts in storage far tool long hence my new year's resolution is to get rid of stuff I don't use. These T bolts had a lot of crud on them so I cleaned them up with a powered wire brush. The nuts, however, have been used a lot by the previous technician and they are worn out on the bottom to some degree.
Machinist Tools Lathe Milling Attachment Tool Makers Precision Vise Jaws Bolts Comes from a watchmakers tool box . Measurement app. 3 1/4" long (not counting the screws/bolts) , 1 3/4" wide and 7/8" jaw depth .Sold as shown Photos are part of description.
These are quality steel lag bolts that have been in the garage for many years.. They are a 15/16 square head bolt and I believe they are 5/8 inch bolt there are (17) 5 inch, (9) 6 inch, (5) 7 inch and (12) 8 inch long bolts they are new but some have a little surface rust to them. These bolts where made when they used quality steel.
Offered is approximately one pound of stainless steel bolts. 3/16 inches in diameter and approximately 9/16 long . Slotted screw head Size 10 Used from industrial equipment.
They are not used but they have been sitting around for a good while and are weathered and spotted here and there. For the record, they are 6 inches long, have hex heads and hex nuts, and are 1/2" in diameter. They are galvanized bolts and washers.
I have a set of 6 NEW Panduit Copper Split Bolts that each measure 2" long and is 1.24" wide- Gauge #8 STR and please read all of the numbers that are listed on the bolts in the title line and also look at the pictures closely to make sure these are exactly what you need. Payment is expected within 3 days of the close of the auction and I will send the bolts within 3 business days of payment being made.
These bolts are ones I've had in my tool bin for a while now with no use for them. I believe they're stainless steel with silicon bronze nuts. Sizes are: 1 1/2" long (3 total) 2 1/4" long (4 total) 2 1/2" long (6 total) 3" long (1 total)
Vintage 1" BRASS Round Head Slotted Bolts, Qty 60, No. 8 - 32, in box Dimensions of Box = 1 3/4” x 2 1/4" x 4 1/2” Weight – 6 oz ***Note, if you're looking for a particular size of either Vintage BRASS or ZINC Screws/washers/nuts & other hardware, please message me and I'll see if I have it in stock, bu
Auction is for a quantity of 75 (SEVENTY-FIVE) "Lock-Bolts":They are part #H2LP-E12-10 or NAS1532H10They are New -but package has been opened. *These are not your every-day household fix-um-up rivets.**I see they are sometimes called a "Huck-Bolt" and you need a "Huck" tool AND 3/8" collars this auction is just for the bolts
HEX HEAD BOLTS 1/2-13 X approx. 1" LONG, PLATED, LOT OF 10 PIECES These bolts and nuts are mixed grades and classes. If you purchase more than one lot, I will ship up to four lots in one small flat rate box for $5.95 shipping.
12 Qty 3" long Hex Bolts 3/4"w threads w/Lock Washers & Nuts sorry we don't have the official size dimensions of thes bolts: we hand measured 3" from bolt tip to hex head - not including the thickness of the hex head thread width 3/4" ALSO HAND MEASURED WE ARE SELLING MANY OTHER TOYS - CHECK OTHER AUCTIONS & EBAY STORE - SAVE ON SHIPPING - SEE OUR PO
This is 25 piece lot that's 25 bolts per lot .of Grade 8 Bolts They are a 5/16 -18 threads per inch and 1-1/4 inch long Photo shows these have been sitting in this tray on a warehouse shely for years-so a bit dusty -not pristine. Better for personal use than for re-sale. Have added lots set up for free shipping as long as they ship with the first paid lot.These came from a military hardware supply co.
Used Grip-A-Strip poster/map hangers, in good condition. Three units included, each 48" long. When new, these come with plastic mounts, or double sided tape, but this auction doesn't include them - those methods don't work very well anyway in my experience.
This is a Lot of at least 1,000 Bolts Nuts Lock Washers 10 pounds Slotted Round Head Bolts 3/8 and 3/4" long there are some 1/4 Round head philips. Nuts washers and bolts all the
This auction is for a Lot of 20 pieces-10 MM 1.50 thread pitch X 25 MM long. These are Flange hex head bolts with a yellow zinc finish. Din 8.8 6921 grade.
By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.