long i bolts for sale, brand-new and used.

Up for sale here is this used Tektronix 502A oscilloscope part. This is the gigantic power transformer. It has all sorts of windings and I'm sure you could do some crazy stuff with it.

YOU ARE BUYING FROM A SELLER WHO HAS **ALWAYS** HAD 100% POSITIVE eBAY FEEDBACK SINCE 1999, NOT JUST IN THE PAST 12 MONTHS. BID OR BUY WITH CONFIDENCE! PLEASE READ THIS ENTIRE DESCRIPTION SO YOU UNDERSTAND EXACTLY WHAT YOU ARE BUYING!

I have 1 NOS box of 5/8 course thread x 2 3/4in long gr 8 bolts. they are black oil phos finish. I am happy to combine shipping for multiple items.

Rare & Unique Antique/Vintage Rolling Wheel Mechanical Length Yard Counter -Still Working- The Wood Measures 16 inches Long & 1 1/2 inch Wide The Metal Wheels Measure 3 3/4 inches in Diameter Overall Condition is ok-Good, There seems to be a light/small crack in the wood near one of the bolts, visible from the bottom, please refer to the Photos.

Used Large Buffalo Forge Table made in the USA. Overall dimensions are 64"X50" and it weighs about 1800 lbs with the fire brick. The fire brick is Laclede King.

Title of your page goes here 1947 AISC STRUCTURAL STEEL CONSTRUCTION MANUAL 5TH This is a 6 1/4" x 9 1/4", semi-pliable hard cover book titled and subtitled Steel Construction / A Manual for Architects, Engineers and Fabricators of Buildings and Other Steel Structures.

This auction is for a 40 x 80 x13 Steel Truss Pole Building. The plans included are the plans I submitted to the building department and were accepted and show live and dead loads also snow and wind loads on the building. The building was purchased as an aircraft hangar and was ordered before we found out that two HOA members on the airpark would not allow this building to be built on our property.

12 SMALL (STACKABLE) PLASTIC BINS GOOD FOR STORING NAILS, SCREWS, BEADS, ETC SIZE" 5 1/2" (LONG) X 3" (WIDE) X 3" (HIGH) SMALL (REMOVABLE) DIVIDERS FOR 6 OF THE BINS RED WITH BLACK DIVIDERS # 495 PLEASE NOTE:

Pressure Vessel Repair shop trying to thin out some unused equipment and parts. I have 25 stainless steel 1-1/2 long hex head bolts. The flat washers, lock washers and nuts come with them.

I bought this undercut saw more than 15 years ago and used only once. Since then it has been sitting on the shelf and collecting dust SIZE: approximately 19” long with a 12” blade permits right or left hand cutting Perfect for cutting door jambs or tight areas during flooring installations

Here I have an awesome, WW2 era (I believe) Ideal Stencil Machine Number 1. It makes 1" stencils out of oilboard/cardstock.The machine is complete and does make stencils. It punches strong and prints evenly.The gears that turn the wheel are very brittle.

K2 CNC Machine Frame PC Router, Drivers, PSU, Stepper Motors & B.O.B. I purchased this super nice machine frame, motors, drivers, breakout board, power supply, router, and software packages for a great simple stable PC in a killer enclosure – just under 4 years ago for work here at Fretsong Guitars. The system has never been put into service – ALL the hardware is brand spankin’ new.

New old stock, I think I ordered them for a speed-vice, but they will fit other vice's

Mixed lot of Hillman and Rockford brand 5/16-18 X 6" hex head cap screw bolts. These are new bulk stock grade 2 zinc plated steel bolts as pictured. You will receive a total of (38) bolts and I will carefully pack these into a flat rate priority shipping box to save on shipping cost's and ship them promptly.

Mixed lot of Hillman and Rockford brand 5/16-18 X 5" hex head cap screw bolts. These are new bulk stock grade 2 zinc plated steel bolts as pictured. You will receive a total of (38) bolts and I will carefully pack these into a flat rate priority shipping box to save on shipping cost's and ship them promptly.

Mixed lot of Hillman and Rockford brand 5/16-18 X 4" hex head cap screw bolts. These are new bulk stock grade 2 zinc plated steel bolts as pictured. You will receive a total of (50) bolts and I will carefully pack these into a flat rate priority shipping box to save on shipping cost's and ship them promptly.

Mixed lot of Hillman and Rockford brand 5/16-18 X 3-1/2" hex head cap screw bolts. These are new bulk stock grade 2 zinc plated steel bolts as pictured. You will receive a total of (58) bolts and I will carefully pack these into a flat rate priority shipping box to save on shipping cost's and ship them promptly.