Spectracom 8225 GPS L1 30dB Outdoor Pole Mount Antenna Used, Good Condition Multiple item listing - so there will be minor cosmetic differences between units but the photos are representative of the condition of all units Product Overview The Model 8225 is an active GPS Outdoor Antenna tuned to receive 1575.42 MHz L1 band satellite transmissions. The received signals are passed through a narrow band-pass filter and a preamplifier within the antenna. The
Technical Product Bulletin FDA Food Grade Epoxy Two Part Plastic Syringe Kit Set 40gm 1:1 Mix Ratio 1.4 oz For more information, call (888) 522-6742 , we are available 24/7
Bonds high, medium and medium/low surface energy substrates. Provides handling convenience, cushioning, damping, and impact resistance Specifications Adhesion to HSE High Adhesion to LSE Medium Adhesive Type Modified Acrylic Adhesive Application Temperature-Environment
3M Polyurethane Protective Tape 8663 New - old stock (manufacture date 12/05 (May-2012)) Size: 4 inches wide x 12 inches Price is per foot (of continuous length) 3M™ Polyurethane Protective Tape 8663 is made from an exceptionally tough abrasion
You are bidding one (1) case of 3M 5952 Acrylic Foam Tape. The size is 1 Inch (25.4 mm) x 36 Yards (32.9 m) Each case includes 9 rolls. 3M™ VHB™ Tape 5952 is a very conformable, double-sided, pressure-sensitive, closed-cell acrylic foam tape with a PE film liner.
PRODUCT INFORMATION tesa® 4287 General Strength Tensilized Polypropylene Tape Product Features tesa® 4287 is a tensilized polypropylene strapping tape with a natural rubber adhesive system. Exhibits good tensile strength with low elongation at the same time. Main Applications Closure of shipping cartons Palletizing Belting of electronic components Bundling and reinforcing
Brand new roll Overview Bonds high and medium surface energy substrates. Provides handling convenience, cushioning, damping, and impact resistance. Plasticizer resistant.
Conductive Adhesive Copper Tape is a thin copper foil with a conductive adhesive that allows conductivity to the substrate. As the tape is applied to your sample, conductive particles in the adhesive fill the gap between the backing and the specimen mount on which the sample is being applied.
PRODUCT INFORMATION NOPI™ 4091 Tensilized Polypropylene Tape Product Features NOPI™ 4091 strapping tape has a strong tensilized polypropylene backing with a rubber resin adhesive. The adhesive has good initial tack and high shear resistance. Properly applied tape shrinks around loads and holds them tightly.
By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.
