pad driver for sale, brand-new and used.

Lights up when plugged in and writes nicely! I was not able to capture a photo of this, however, because it disappears quickly after writing it, assumingly for security purposes when signing for something. Driver software did not install like other models when plugged in via USB cable to my computer but it did immediately light up and work, unlike other models.

This item is a new OEM part, made by Clarke American Sanders. This item is a 16 inch supergrip pad driver. The molded polymer pad face has hundreds of individual hooks that grip into the threads of a floor pad and hold it securely while operating.

** FIVE ** RUBBER PAD DRIVER SPRING MOUNT KITS PART # 10666A MADE FOR THE CLARKE OBS-18 and OBS-18 DC ORBITAL SANDER These are brand new replacemen

TWO SETS RUBBER SPRING KIT AND BEARING FOR PAD DRIVER PLATE CLARKE PART # 50736A and 10666A FOR THE CLARKE OBS-18, OBS-18 DC ORBITAL SANDER High quality double-sealed bearings, plus two sets of 4 rubber springs. The s

RUBBER SPRING KIT AND BEARING FOR PAD DRIVER PLATE CLARKE PART # 50736A and 10666A * * 4 SETS * * FOR THE CLARKE OBS-18, OBS-18 DC ORBITAL SANDER Four high quality double-sealed bearings, plus 4 sets of 4 rubber spr

SIX BEARINGS FOR 7" HOOK AND LOOP DRIVER PAD REPLACES CLARKE PART # 902606 MADE FOR THE CLARKE EZ-SAND RANDOM ORBIT SANDER Replaces the bearings inside the pad driver discs. This listing is for SIX BEARINGS; I also offer them in pairs. To replace bearings on one pad driver disc, order one pair.

7" HOOK AND LOOP DRIVER PAD GENUINE CLARKE PART # 11154A (38734A plus bearings and spacers) MADE FOR THE CLARKE EZ-SAND RANDOM ORBIT SANDER This a single pad driver. To order replacements for one machine, you need to order quantity 3. This part consists of the aluminum driver disc, with the six hook segments already installed, complete with bearings and spacers.

RUBBER SPRING KIT AND BEARING FOR PAD DRIVER PLATE CLARKE PART # 50736A and 10666A FOR THE CLARKE OBS-18, OBS-18 DC ORBITAL SANDER High quality double-sealed bearing, plus set of 4 rubber springs. The springs are identical to those supplied by Clarke.

RUBBER PAD DRIVER SPRING MOUNT KIT PART # 10666A MADE FOR THE CLARKE OBS-18 and OBS-18 DC ORBITAL SANDER These are brand new replacement parts. Included: four rubber springs, four lock washers, four lock nuts.

BEARING FOR PAD DRIVER PLATE CLARKE PART # 50736A FOR THE CLARKE OBS-18 or OBS-18 DC ORBITAL SANDER The bearing is rated EMQ (Electric Motor Quality) and double sealed. This is very important in an application where the bearing operat

RIGID BASE PLATE, PAD DRIVER GRIP FACE PLUS Bearing and Rubber Spring Mount Kit FOR CLARKE OBS-18 AND OBS-18 DC CLARKE PART # 29931A, 39730A (previously 20901A, 32519A)

PAD DRIVER PLATE ECCENTRIC RETAINER with SCREW FOR CLARKE OBS-18 AND OBS-18 DC ORBITAL SANDERS PART # 66982A, 85718A Related parts:

16" PAD-LOK GRIP FACE PAD DRIVER FOR BUFFERS, POLISHERS, SANDERS Standard clutch plate, referred to as an NP-9200, fits most 17" machines, including (as far as we know) all Clarke machines which have not been modified

Original Authentic Clarke 16" Plastic Pad Driver assembly. This plastic pad driver plate has a beveled edge, which promotes better dust pick up on sanders and buffers equipped with vacuum system. Can be used with 16" buffer pads, sanding screens and easy-change sanding discs.

Clarke obs 18 driver pad part number 20901a. Bearing moves freely. Taken from a sander with a blown motor.

Sharp Heavy Duty 1200 W Microwave - R22GTF Description: Microwave Oven, 1200 watts, all stainless, s/s door, cavity && outer wrapper, programmable timer, durable side-hinged see-thru door, Express Defrost™, 10 computerized touch pads, 20-pad cap., SelectaPower™, 3-stage cooking, double quantity, 120V, 60Hz, 20 amp, NEMA 5-20R, NSF-4, UL Specifics: Pan Size: Half Features: Programmable Watts: 1200w Voltage: 120/1v/60Hz, 20 amp

Malish 20" Pad Lok Driver with Riser NP-9200 Std Clutch Plate Showerfeed Plastic Block 1/2" Trim Bristles Riser Retail price is over $110.00 including clutch plate Can be used in most 21" slow speed machines Clutch plate does not fit all machines Please check details before buying, no returns please

TRIPLE SSS COMMERCIAL FLOOR BUFFER / POLISHER MACHINE IS IN GOOD WORKING CONDITION RUNS SMOOTH & QUITE I HAVE ONLY TESTED THE MACHINE I HAVE NEVER USED IT.

20" KENT LOW SPEED SCRUBBER SANDER POLISHER FLOOR BUFFER MODEL NO. KF 200A SERIAL NO. 903900065 RPM 175 VOLTS 115 HZ 60 AMPS 14 H.P.

This used Nobles SpeedScrub SS20 Traction Drive model , 20" cleaning path , comes with used 2/12v batteries , pad driver , brush , few new pads (2/20" white and 2/20" red) and on board battery charger . Scrubber are in good working condition and have only 63.00 hours on the meter. Everything works as it should.