Plastic Mixing Tanks & Accessories (Processing Tools & Machinery) for sale, page 80

10 hp big h (hockmeyer) disperser air/ oil lift u. l approved item #8448

Newton Falls, Ohio, United States
Jan 30th

10 HP. Big H Disperser Air/Oil Lift U. L.

Lightnin - xjq-30 - mixer with lightnin .30 hp motor

Spartanburg, South Carolina, United States
Jan 30th

Lightnin - XJQ-30 - Mixer with Lightnin .30 HP Motor Specifications Model: XJQ-30 Serial: R9870685900506 Motor: Model: E77R3026V-EA Type: CS Frame: FD56YZ HP: .30 PH: 1

Philadelphia mixers 1 hp mixer (mx2086)

United States
Jan 30th

Inventory #: MX2086 Manufacturer: Philadelphia Mixers Model #: FGLS-11 HP: 1 RPM: 1725 Shaft Size: 1" Drive: Gear Clamp: Bolt-On Serial #: 27997-10 Volts: 230/460 For shipping and handling arrangements, please call Lanco Corporation @ 616-887-8300 or toll free @ 888-248-8500.

Philadelphia mixers 1 hp mixer (mx2087)

United States
Jan 30th

Inventory #: MX2087 Manufacturer: Philadelphia Mixers Model #: FGLS-11 HP: 1 RPM: 1725 Shaft Size: 1" Drive: Gear Clamp: Bolt-On Serial #: 27997-9 Volts: 230/460 For shipping and handling arrangements, please call Lanco Corporation @ 616-887-8300 or toll free @ 888-248-8500.

Fluid automation model fa-1292-265

Nicholasville, Kentucky, United States
Jan 30th

Buyer is responsible for all shipping arrangements or local pickup is available. We are out of the office from Friday 5:00 pm EST until Monday 8:00 am EST

Gpi fiberglass pit open top drop in floor mount mixing mixer tank 133 gallon

Clover, South Carolina, United States
Jan 30th

GPI Fiberglass Drop-In Mixing Mixer Tank 133 Gallon Inside Diameter: 33-5/8" 36" Above Ground 50" Total Height Tank Only not including top connections bottom valve etc Top Holes: (1) 1-1/2" , (1) 4" , (2) 1" Bottom Hole without valve 4" hinged lid

Gpi fiberglass pit open top drop in floor mounting mixer mixing tank 133 gallon

Clover, South Carolina, United States
Jan 30th

GPI Fiberglass Pit Open Top Drop In Floor Mounting Mixer Mixing Tank 133 Gallon 12" Above Ground Tank Only 38" Below Ground Tank Only Top Holes: (1) 4" , (1) 1-1/2" , (2) 1" 33-5/8" Inside Diameter Bottom Hole w/o Valve 4" Hinge Lid

Seat support lower titanium for 7 1/8 inch 9b john crane seal unused

Morgantown, Pennsylvania, United States
Jan 30th

Seat support Lower Titanium for 7 1/8 inch 9B John Crane seal Unused This is a lower seat support made by Philadelphia Gear for Philadelphia Mixers. This was a spare part for a John Crane 9B double mechanical seal. The seal this was intended for was in a Philadelphia Mixers PTEM-26 mixer/agitator.

Drive coupling for ptem 12 philadelphia mixers unused

Morgantown, Pennsylvania, United States
Jan 30th

Drive coupling for PTEM 12 Philadelphia Mixers Unused This is an unused drive coupler made by Philadelphia Gear for Philadelphia Mixers. This is for a PTEM-12 mixer/agitator. This item is coated in factory preservative which can be seen in the photos below.

Shaft sleeve titanium for ptem 26 philadelphia mixers unused

Morgantown, Pennsylvania, United States
Jan 30th

Shaft sleeve titanium for PTEM 26 Philadelphia Mixers Unused This is an unused shaft sleeve made by Philadelphia Mixers for a PTEM-26 mixer/agitator. Titanium Bore: 6 7/16 inches Length through bore: 4.51 inches Stamped in top edge: 818807 Specifications: MFG: Philadelphia Mixers Model: 114 Serial: Volts: Amps: Phase: Dr

Smico manufacturing vibrating rotary separator / w hopper feeder

Huntington Beach, California, United States
Jan 30th

Up for Sale ! SMICO MANUFACTURING VIBRATING ROTARY SEPARATOR / W HOPPER FEEDER MODEL 89115 SERIAL20 734 SEMENS ALLIS MOTOR ( HP 1 ) RPM 1735 230 / 460 VOLTS 3PAHSE Unit is in good working condition. This item is used and has been tested to be in good working condition.

Pinion gear for ptem 24 philadelphia mixers unused

Morgantown, Pennsylvania, United States
Jan 30th

Pinion gear for PTEM 24 Philadelphia Mixers Unused This is an unused pinion gear made by Philadelphia Gear for Philadelphia Mixers, part number 46025-6364. This was a spare part for a PTEM-24 with an output speed of 56 rpms. This has factory preservative on it which can be seen in the pictures below.

Split ring adapter collar for ptem 26 philadelphia mixers

Morgantown, Pennsylvania, United States
Jan 30th

Split ring adapter collar for PTEM 26 Philadelphia Mixers This is an unused split ring adapter collar made by Philadelphia Mixers, part number 88680-0031. This was a spare part for a PTEM-26. This is coated in factory preservative.

Split ring adapter collar for ptem 12 philadelphia mixers unused

Morgantown, Pennsylvania, United States
Jan 30th

Split ring adapter collar for PTEM 12 Philadelphia Mixers Unused This is an unused split ring adapter collar made by Philadelphia Mixers. This was a spare part for a PTEM-12. This is coated in factory preservative.

Split ring adapter collar 6 7/8 in for ptem 26 philadelphia mixers unused

Morgantown, Pennsylvania, United States
Jan 30th

Split ring adapter collar 6 7/8 in for PTEM 26 Philadelphia Mixers Unused This is an unused split ring adapter collar made by Philadelphia Mixers, part number 80680-0030. This was a spare part for PTEM-26. Carbon steel Bore: 6 7/8 inches Specifications: MFG: Philadelphia Mixers Model: 80680 0030 Serial: Volts: Amps: Phase: Drive

Intermediate gear 53t for ptem 16 philadelphia mixers unused

Morgantown, Pennsylvania, United States
Jan 30th

Intermediate gear 53T for PTEM 16 Philadelphia Mixers Unused This is an unused intermediate gear made by Philadelphia Mixers, part number 53T. This was a spare part for a PTEM-16. This is coated with factory preservative which can be seen in the pictures below.

Shaft sleeve for ptem 24 philadelphia mixers unused

Morgantown, Pennsylvania, United States
Jan 30th

Shaft sleeve for PTEM 24 Philadelphia Mixers Unused This is an unused shaft sleeve made by Philadelphia Mixers. This was a spare part for a PTEM-24. Size: 6 5/8 inches Bore: 6 inches OD: 6 5/8 inches Length through bore: 6 23/32 inches Specifications: MFG: Philadelphia Mixers Model: Serial: Volts: Amps: Phase:

Split collar adapter ring 3.9 in bore for ptem 12 philadelphia mixers unused

Morgantown, Pennsylvania, United States
Jan 30th

Split collar adapter ring 3.9 in bore for PTEM 12 Philadelphia Mixers Unused This is a split collar adapter ring made by Philadelphia Mixers, labeled part number 10. This was a spare part for a PTEM-12. This is coated with a factory preservative.

Locking collar for ptem 20 philadelphia mixers unused

Morgantown, Pennsylvania, United States
Jan 30th

Locking collar for PTEM 20 Philadelphia Mixers Unused This is an unused locking collar made by Philadelphia Mixers, size 5 3/4 inch. This was a spare part for a PTEM-20. This collar retains a John Crane 5 3/4 inch 9T seal.

Shaft sleeve support 6 11/32 in id 90235 1008 ptem philadelphia mixers unused

Morgantown, Pennsylvania, United States
Jan 30th

Shaft sleeve support 6 11/32 in ID 90235 1008 PTEM Philadelphia Mixers Unused This is an unused shaft sleeve made by Philadelphia Mixers, part number 90235-1008. This has some factory preservative which can be seen in the pictures below. Bore: 6 11/32 inches OD of larger tapered side: 7 25/32 inches OD of other side: 7 3/32 inches Height/length through bore: 4 1/2 inches Specifications: MFG: Philadelphia Mixers Model: 90235 1008 Serial: Volts:&nbs