Plastic Mixing Tanks & Accessories (Processing Tools & Machinery) for sale, page 81

Gear low speed 20.9:1 for mv-06p7ss philadelphia mixers unused

Morgantown, Pennsylvania, United States
Jan 30th

Gear low speed 20.9:1 for MV-06P7SS Philadelphia Mixers Unused This is a low speed gear made by Philadelphia Gear for Philadelphia Mixers. This was a spare part for a MV-06P7SS, 5.4 Hp, 20.9:1 ratio. Teeth are encased in factory protective layer for safe storage Bore: 2.43 inches Thickness/length through bore: 2 7/8 inches Specifications: MFG: Philadelphia Mixers Model: Serial: Volts: Amps: &n

Ring sleeve for 7 1/8 in seal ptem 26 philadelphia mixers unused

Morgantown, Pennsylvania, United States
Jan 30th

Ring sleeve for 7 1/8 in seal PTEM 26 Philadelphia Mixers Unused This is an unused ring sleeve made by Philadelphia Mixers, part number 80235-0192. This was a spare part for a PTEM-26 with a John Crane 7 1/8 inch 9B double mechanical seal. This is coated with factory preservative.

S. howe heavy duty ribbon mixer

Hammonton, New Jersey, United States
Jan 30th

USED S. HOWE 47.8 CU FT TO TOP OF RIBBON HEAVY DUTY DOUBLE RIBBON MIXER MODEL # P366 CARBON STEEL CONSTRUCTION, TROUGH IS 36” WIDE x 72” LONG 38” DEEP. INNER RIBBON PUSHES MATERIAL TO ENDS 2 1/2 ” X 3/8” THICK RIBBONS.

Chemineer 3gtd-2 turbine agitator gear drive for tank mixer assembly, 2hp, gtd,

Chandler, Arizona, United States
Jan 30th

Click Image To View Full Size

A.u.k. muller 24vdc solenoid valve; .287"/7.3mm nozzles;normally closed-new

Wheat Ridge, Colorado, United States
Jan 30th

A. u. K.

4" x 20" propeller mixer stirrer

Fort Worth, Texas, United States
Jan 30th

4" x 20" Propeller Mixer Stirrer Description - Propeller Size : 4" D x 13/32" Bore - Rod Material : Stainless Steel - Rod Length : 20" - Used but is in good condition - Please visit our store to see all our other mixers and mixer equipment #5212( JK )2/1/13

Drais mannheim fh30-s, stainless steel pony mixer, '2003, 1.5kw

Morenci, Michigan, United States
Jan 30th

Drais Mannheim Type: FH30-S, SN: 56697 Stainless Steel Pony Mixer, Lighted '2003, 1.5kw drive ( total load for machine: 2.2kw) 400v/50hz (was used at large GE plant on 60hz) Bartec controls No cans, they would be around 30ltr. in size Worked when removed from service in Dec'12 Must go freight 1700#

Gear, low speed 847931 1 for 7mvg 3 philadelphia mixers unused

Morgantown, Pennsylvania, United States
Jan 30th

Gear, low speed 847931 1 for 7MVG 3 Philadelphia Mixers Unused This is a low speed gear made by Philadelphia Mixers, part number 847931-1. This was a spare part for a 7MVG-3. This is coated with factory preservative.

Bushing holder for n33g 100v lightin mixers unused

Morgantown, Pennsylvania, United States
Jan 30th

Bushing holder for N33G 100V Lightin Mixers Unused This is an unused bushing holder made by Lightin Mixers. This was a spare part for a N33G 100V mixer. Stainless steel ID: 1.88 inches Specifications: MFG: Lightin Mixers Model: for N33G 100V Serial: Volts: Amps: Phase: Drive: Co

Small stainless steel reactor

South Plainfield, New Jersey, United States
Jan 30th

5 Gallon Stainless Steel Jacketed Reactor w/ Agitator Temp Capacity 300* F Shell Pres: 160 psi Jacket Pres: 150 psi Multiple jacket ports 3/4" size

Lightnin .43 hp mixer (mx2094)

Sparta, Michigan, United States
Jan 30th

Inventory #: MX2094 Manufacturer: Lightnin Model #: B77R0067M-WP/XJ43AM HP: .43 Drive: Gear Clamp: No Serial #: 89/392463 Volts: 208-220/440

Beer or soda packaging equipment (carbonated capability)

Allen, Texas, United States
Jan 30th

This equipment is corbonated capable, completed line: · PET bottle maker, Air compressor (bottlesize from 9oz to 16.9oz).

Used k-tron soder screw type modular loss-in-weight feeder kml-t80

San Juan, Puerto Rico, United States
Jan 30th

For sale used in very good condition K-Tron KML-T80 twin screw loss-in-weight feeder. K-Tron product spec: separatorengineering.com/separator_pdf/ktron_pdf/K-ML-T80-10D.pdf Shipping and handling to the lower 48 states will be $200.

Constant speed shaft 200 for n33g 100v lightin mixers unused

Morgantown, Pennsylvania, United States
Jan 30th

Constant speed shaft 200 for N33G 100V Lightin Mixers unused This is an unused constant speed shaft made by Lightnin Mixers, part number 200. This was a spare part for a N33G-100V mixer. 14 spline Spline OD: 0.93 inches Length: 15 5/8 inches Outside diameters (starting at splined end): 1.375, 1.259, 1.11, 0.9 inches Specifications: MFG: Lightin Mixers Model: 200 Serial: Volts: Amps:&

10 hp pro quip mixer 10qhx31b right angle agitator drive agitator process chem

Rehoboth, Massachusetts, United States
Jan 30th

J. Little Mercer Co., Inc. 10 HP PRO-QUIP RIGHT ANGLE DRIVE Stock Number: B-3466 Mfg.

Polyurethane blending tank system with master control panel, 120 gallon capacity

Sylvania, Ohio, United States
Jan 30th

The tanks are approx 120 gallons each. Was previously used to feed 3 different colored Polyol sytems and the ISO to a dispense machine. 3 Poly and 1 ISO tank in this system.

Mixer double ribbon steel 36 cu. ft. with drive

Hammonton, New Jersey, United States
Jan 30th

Used S Howe 36 cu ft heavy duty double ribbon mixer model #036, carbon steel construction, trough 36" wide X 72" long X 38" deep. Inner ribbon pushes material to ends, 2 1/2" X 3/8" thick. Outer ribbon pushes material to a 10" center bottom outlet with an air operated slide gate valve.

Grovhac series 10- 1102 stanchion mixer

Rochester, New York, United States
Jan 30th

12-A-5 ALBION RLS Please click the shipping and payments tab and read the Seller's payment instructions below for other payment types we accept!!! 585-349-2666. Thanks, Upstate Wholesale Supply We also buy used and new surplus equipment, breakers, surplus,fire alarm, security etc...

Air mixer clamp on type 68" l. shaft with 9" prop. item #8459

Newton Falls, Ohio, United States
Jan 30th

Air Mixer Clamp On Type 68 " Stainless Steel Shaft & 9" Single Prop. - P & K Equipment, Inc. phone: 216-831-8858 fax: 216-831-7779 Item #8459 Air Mixer Clamp On Type 68 " Stainless Steel Shaft & 9" Single Prop.

3/4 hp. lightnin clamp-type mixer 60" stainless steel shaft with prop item #8460

Newton Falls, Ohio, United States
Jan 30th

3/4 HP Lightnin Clamp Type Mixer Set Up For DC 90 Field Volt Amps 60" Shaft - P & K Equipment, Inc. phone: 216-831-8858 fax: 216-831-7779 Item #8460 3/4 HP Lightnin Clamp Type Mixer Set Up For DC 90 Field Volts: 60" Shaft 3/4 HP LIGHTNIN MIXER CLAMP-TYPE MODEL ND-3 UNIT IS SET UP FOR DC POWER 90 VOLTS FILED. MIXER HAS 60 INCH STAINLESS STEEL SHAFT WITH PROP.