+ Post new Ad

Plastic Mixing Tanks & Accessories

The average price for current category was $3,918.29 last month.

There are 2523 ads in this category.

BOWERS CLEMMER STEELCRAFT MIXER W/TANK 25HPTT

Bowers clemmer steelcraft mixer w/tank 25hptt

  • Coffeyville, Kansas, United States
  • Jan 30th
BOWERS PROCESS EQUIPMENT A STEELCRAFT COMPANY MIXER MODEL #25HPTT SERIAL #WO09081 CLEMMER STEELCRAFT TANK SERIAL #W09081/1 MAWP 100PSIG @ 338 DEG F MAEWP 0 PSIG @ 338 DEG F MDMT 32 DEG @ 100 PSIG CRN OH71015
Propeller Mixing 316 SS 12 inch OD Dull finish #1

Propeller mixing 316 ss 12 inch od dull finish #1

  • Morgantown, Pennsylvania, United States
  • Jan 30th
Propeller Mixing 316 SS 12 inch OD Dull finish #1 This is a used stainless steel mixing propeller in very good condition. This only has a few minor flaws on the blades that will not affect operation. Outside Diameter: 12" Hub : 1½" (id) x 2" long Stamped on Hub: 12.4 316 SS Dull finish (2) set screw holes Not designed for boat use.
LIGHTNIN NC-4 `1/4 HP 1725 RPM 230/460V 3 PHASE MIXER HEAD

Lightnin nc-4 `1/4 hp 1725 rpm 230/460v 3 phase mixer head

  • Keokuk, Iowa, United States
  • Jan 30th
LIGHTNIN MIXER MODEL NC-4 TYPE P FRAME L48 1/4 HORSE MOTOR 230/460V 3 PHASE 1725 RPM (1rac) AMPS: 1.1/.55 USED THE SHAFT DOES TURN FREELY
SIGMA DOUGH MIXER 500 LB CAPACITY WITH TIP OVER UNLOADING. 10 HP MOTOR MOUNTED

Sigma dough mixer 500 lb capacity with tip over unloading. 10 hp motor mounted

  • Newton, Kansas, United States
  • Jan 30th
Good Condition SIGMA DOUGH MIXER 500 LB CAPACITY WITH TIP OVER UNLOADING. 10 HP MOTOR MOUNTED ON CARDINAL LOAD CELLS If you're looking for a great piece of equipment at a great price, then look no further! This model has been stored inside, and is ready to ship to you.
UNKNOWN BRAND GEAR SET 60 TOOTH APPROX 6 1/8" OD, 1 1/8" ID

Unknown brand gear set 60 tooth approx 6 1/8" od, 1 1/8" id

  • Coffeyville, Kansas, United States
  • Jan 30th
GEAR SET LARGE GEAR: APPROX DIMENSIONS-- 6 1/8" OVERALL DIAMETER, 1 1/8" BORE, 2 1/2" DEPTH 60 TEETH SMALL GEAR: APPROX DIMENSIONS-- 1 3/8" OVERALL DIAMETER, 4 3/4" HEIGHT 13 TEETH
LIGHTNIN 3HP TANKS MOUNTED MIXER MODEL #71-Q-3 RMX

Lightnin 3hp tanks mounted mixer model #71-q-3 rmx

  • Johnson City, Tennessee, United States
  • Jan 30th
LIGHTNIN 3HP TANKS MOUNTED MIXER MODEL #71-Q-3 RMX
LIGHTNIN MIXER 5K49DG1593 1/4 HP 1725 RPM 230/460 3 PHASE

Lightnin mixer 5k49dg1593 1/4 hp 1725 rpm 230/460 3 phase

  • Keokuk, Iowa, United States
  • Jan 30th
LIGHTNIN MIXER 1/4HP MODEL 5K49DG1593 230/460 1.25/.63 AMP 3 PHASE CODE M USED ...HOWEVER I CANNOT TELL WHERE BEEN IN WAREHOUSE FOR A LONG TIME DUSTY (4RAI)
LIGHTNIN 1 HP DC MIXER 180 VDC 2500 RPM 6" STEM BRASS HEAD MODEL D-4 CD186AT

Lightnin 1 hp dc mixer 180 vdc 2500 rpm 6" stem brass head model d-4 cd186at

  • Camden, New Jersey, United States
  • Jan 30th
LIGHTNIN 1 HP DC MIXER
NEW CHEMINEER 4GTD-5 TURBINE AGITATOR GEARBOX POWER 5 HP MOTOR RPM 188

New chemineer 4gtd-5 turbine agitator gearbox power 5 hp motor rpm 188

  • Mesa, Arizona, United States
  • Jan 30th
YOU ARE BUYING ONE NEW CHEMINEER 4GTD-5 TURBINE AGITATOR GEARBOX POWER 5 HP MOTOR RPM 188 OUTPUT RPM 25. THIS IS NEW INTEL SHELF SURPLUS AND IS GUARANTEED WORKING. IF YOU HAVE ANY QUESTIONS PLEASE CALL 480-200-0156 OR HIT ASK THE SELLER A QUESTION.
JWI INC JL33 3PH 208-230/460V 1725/1425RPM 1/3HP MIXER T6T17FC48A, DENT

Jwi inc jl33 3ph 208-230/460v 1725/1425rpm 1/3hp mixer t6t17fc48a, dent

  • Sunman, Indiana, United States
  • Jan 30th
Concepts Industrial
AEC 4 Component Blender, Model OS-100-4

Aec 4 component blender, model os-100-4

  • Elk Grove Village, Illinois, United States
  • Jan 30th
Lightnin XJ-65 Mixer - .65 HP Inverter Ready Mixer w/ Mount - Excellent !!

Lightnin xj-65 mixer - .65 hp inverter ready mixer w/ mount - excellent !!

  • Green Bay, Wisconsin, United States
  • Jan 30th
3 HP Lightnin Dura-Mix 4 Bolt Mount Mixer Model #XLC-300 Item #8458

3 hp lightnin dura-mix 4 bolt mount mixer model #xlc-300 item #8458

  • Newton Falls, Ohio, United States
  • Jan 30th
3 HP Lightnin Dura-Mix 4 Bolt Mount Engery Efficient Mixer - P & K Equipment, Inc. phone: 216-831-8858 fax: 216-831-7779 Item #8458 3 HP Lightnin Dura-Mix 4 Bolt Mount Engery Efficient Mixer 3 HP LIGHTNIN DURA-MIX ENERGY EFFICIENT (4) BOLT MOUNT MIXER:UNIT HAS MODEL #XLC-300 BAM: SERIAL #890417 RPM 1725/1425: 230/460 VOLTS UNIT HAS (6) BOLT 5 1/2 ” DIAMETER FLANGE.
2 VINTAGE ALUMINUM PROPELLORS STEAMPUNK

2 vintage aluminum propellors steampunk

  • Las Vegas, Nevada, United States
  • Jan 30th
2 Cast aluminum boat propellors. Each has 3 blades and measures about 4" across. I have been told they are from industrial mixers.
50 Gallon GROEN Mixing Tank

50 gallon groen mixing tank

  • Algonquin, Illinois, United States
  • Jan 30th
Approximately 50 gallon GROEN mixing tank in good condition , measuring 25 1/2 " diameter x 25 " straight side , complete with 1/2 stainless steel cover , carbon steel pipe legs , motor , stainless steel bridge , stainless steel 4 blade propeller mixer & 1 1/2 " diameter tangental center bottom outlet . Shipping & freight rate to be determined .
Stainless Steel Double Motion Kettle

Stainless steel double motion kettle

  • Algonquin, Illinois, United States
  • Jan 30th
Stainless Steel Double Motion Kettle, missing specification tags, Stainless steel bridge, carbon steel motor mount with motor, carbon steel frame, 1/2 jacketed, 42-1/2" diameter x 32" deep with a 2" center bottom outlet, double motion with scrapers, counter rotating blades are bent. In fair condition . Shipping & freight rates to be determined .
LIGHTNIN XLO-150F AGITATOR DRIVE AERATOR 1765RPM 1 1/2 HP 60HZ 4.8-4.8/2.4A *XLNT*

Lightnin xlo-150f agitator drive aerator 1765rpm 1 1/2 hp 60hz 4.8-4.8/2.4a *xlnt*

  • Reidsville, North Carolina, United States
  • Jan 30th
LIGHTNIN XLO-150F AGITATOR DRIVE AERATOR 1765RPM 1 1/2 HP 60HZ 4.8-4.8/2.4A EXCELLENT CONDITION PHOTO IS ACTUAL ITEM WEIGHT OF ITEM: 180LBS DIMENSIONS OF ITEM: 32" X 13 3/4 " X 21" BWP2B2 LMS/MLW WARRANTY All equipment comes with a 6 month warranty. Equipment is guaranteed to be received as described in the listing or a full refund will be given upon return. SHIPPING Most items will be shipped the next business day after payment has cleared.
LIGHTNIN XLO-150F AGITATOR DRIVE AERATOR 1725RPM 1 1/2 HP 60HZ 4.8-4.8/2.4A *XLNT*

Lightnin xlo-150f agitator drive aerator 1725rpm 1 1/2 hp 60hz 4.8-4.8/2.4a *xlnt*

  • Reidsville, North Carolina, United States
  • Jan 30th
LIGHTNIN XLO-150F AGITATOR DRIVE AERATOR 1725/1450RPM 1 1/2 HP 60HZ 4.8-4.8/2.4A 208-220/440V EXCELLENT CONDITION PHOTO IS ACTUAL ITEM WEIGHT OF ITEM: 167 LBS DIMENSIONS OF ITEM: 32 X 13 X 13 BWP2B2 LMS/MLW WARRANTY All equipment comes with a 6 month warranty. Equipment is guaranteed to be received as described in the listing or a full refund will be given upon return. SHIPPING Most items will be shipped the next business day after payment has cleared.
3" dia. 316SS square pitch mixing propeller - 30MP

3" dia. 316ss square pitch mixing propeller - 30mp

  • Mississauga, ON, Canada
  • Jan 30th
Part # 30MP - 3" dia. propeller with bore sizes available from 3/8" - 5/8" bore - please indicated bore size you need These are square pitch propeller Propellers are designed for all-purpose mixing, blending, agitating, and liquid movement. .
CHEMINEER MIXER 10HP - MODEL# 4GTA-10

Chemineer mixer 10hp - model# 4gta-10

  • Johnson City, Tennessee, United States
  • Jan 30th
CHEMINEER MIXER 10HP - MODEL# 4GTA-10

By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.

Accept All Cookies