plate washers for sale, brand-new and used.

NEW OLD STOCK ( Box is a little dusty, but the product is new, unused, and complete) DISTINCTIVE BUILDERS HARDWARE BERN MANUFACTURING PULL PLATE/US32D/630 / 4” X16”

I am parting out an early 1930's or 1940's light duty Delta shaper. This listing is for the shown motor support / cover with the 4 original bolts and original washers & nuts. There are no cracks or breaks.

Wacker WP1550 and WP1540 Plate Compactor OEM Exciter Bolt & Washer Kit Genuine Wacker Neuson OEM parts, numbers: Bolts 11582 and Washers 112086

NEW IN SEALED PACKAGING Product Description 3" Channel Rack-To-Runway Mounting Plate Using J-Bolts 9 to 12" W; Black Secures cable runway to the top of Standard and Universal equipment racks. J-Bolts hook under the mounting plate to secure the plate to the rack’s top angles. Mounts either parallel or perpendicular.

Rockwood 107 X 70C.32D Stainless Steel Pull Plate, 16" Height x 4" Width x 0.050" Thick, 8" Center-to-Center Handle Length, 3/4" Pull Diameter, Satin Finish The Rockwood 107 x 70C.32D stainless steel pull plate has a rounded grip handle and a satin finish (Rockwood/BHSM number US32D/630) and protects a door when being opened. The pull plate meets American National Standards Institute (ANSI) A156.6: J405 specifications.

Aluminum Build Plate for RepRap 3D Printer. Same as featured on Thingiverse Aluminum Build Plate was designed to be used as heated build surface of typical 3d printer with 200 x 200 mm XY build area, it is compatible with MK1, MK2, MK2A and MK2B heat bed PCBs. Material is 3mm thick T6061-T6 aluminum alloy.

For sale is this new Hot End from gadgets 3D, please verify that will fit your 3D printer, if you have any question let me know. Features: - Aluminum Block Resistor Hotend

Description, Hand built stir plate for yeast starters and such. Made out of a cigar box for cool factor. Box measures about 7" x 9 1/4" x 2 1/4" deep.

UPPER MEDIA GUIDE PLATE P# 38825-2 Zebra Internal Printer Parts Internal parts for Zebra printers: Gear

CRT-1 Office Chair cylinder removal tool Seat Plate Protector Gas Spring Pneumatic Cylinder Removal Separator Tool This is a unique tool to assist in the separation / removal of the Gas Spring Spindle from the Seat plate. The design is intended to transfer the shock wave from the hammer strikes close to where the the 2 parts meet. By using the tool, you insure that you will NOT damage your mechanism or your Gas Spring Cylinder.

BEARING FOR PAD DRIVER PLATE CLARKE PART # 50736A FOR THE CLARKE OBS-18 or OBS-18 DC ORBITAL SANDER The bearing is rated EMQ (Electric Motor Quality) and double sealed. This is very important in an application where the bearing operat

Description, Hand built stir plate for yeast starters and such. Made out of a cigar box for cool factor. Box measures about 6 7/8" x 7 7/8" x 2" deep.

10" Milling machine rotary plate or lathe face plate extremely well made. It includes several threaded posts with square nuts on them, and an envelope with some different sized washers and more of the threaded posts. Center arbor hole is 7/8".

Retrofit Lid Adaptor for Crouse-Hinds® Champ® Series fixtures (VMV, VMVIG, nVMV, LMV, DMV, DMVIG, N2MV and others). Fits all standard covers including Pendant, Ceiling, Wall and Stanchion. Adaptor