point 500 for sale, brand-new and used.

Meter Relay Indicator Set Point Unit 0-500 Amp Type 106 $ 140.00 ITEM: Meter Relay Indicator Set Point Unit 0-500 Amp Type 106 PRICE: $ 140.00 ---Shipping costs will vary depending on location. ---

Stains and normal wear on the case but is otherwise in excellent condition. Calibration instructions, Schematics, tables, and drawings are included in the operators guide, a copy included in auction. The probe attaches to a female BNC connector.

Overview The IMU8420G is a high performance mobile standalone 10 DOF data logger plus GPS ready to use with an optional AA battery holder or lithium polymer battery, uSD socket and wireless connector. The pre-programmed data logging software is capable of delayed start, threshold start, on pow

Overview The IMU8420 is a high performance mobile standalone 10 DOF data logger ready to use with an optional AA battery holder or lithium polymer battery, uSD socket and wireless connector. The pre-programmed data logging software is capable of delayed start, threshold start, on power up star

Rosemount 2 wire type transmitter (Gets power from receiver or controller) Suitable for use with a 3 or 4 wire Resistance Temperature Transmitter (RTD) sensor Range: 0.0-100 deg C (32-212 deg F) Provide an installation-ready solution using Complete Point Solutions (CPS) Accept a wide variety of 2-, 3-, and 4-wire RTDs and thermocouple sensor types Configure using the Model 244EC Configuration Interface and a standard PC Provide 500 VAC input to output isolation.

Auction is for (1) Littelfuse IDSR 500 time delay fuse. New old stock in original packaging. Thanks

ATC 375 Multi Ranger Computing Timer Counter MODEL 375A 500 Q 50PX 120V5060 U9109H 375 This unit is in overall Excellent Condition, but please note that the outer case has been cracked at some point and part of it is gone. This in no way affected the electronics, only the outer case base unit. The unit was fully functional when removed from service.

Brand new monitor made by Carlo Gavazzi. 3 phase monitoring makes it easy to troubleshoot which phase is the culprit.

Shipping Payment

1UNIT : CZ-K1P Amplifier Unit, Main Unit, PNP by KEYENCE NEW!!!!!! SPECIFICATIONS

RPS-100-72-500 - Migatron RPS-100 Controller with Remote Sensing Head, 5"-72" range, 0-10 VDC and 4-20 mA Analog Output

SymCom Model 460 Three-Phase Voltage Monitor

3 in 1 High Power Zigbee module (I/O switch: Coordinator, Router and end Device) TI CC2530 + CC2590 Solution, Support Mesh Network Support High Power, Long range, Serial Port, Digital I/O, ADC Features: 1. 3 in 1 firmware: Coordinator, Router and end Device 2. TI CC2530 + 2591, High power mode 3.

DTA4848C1 Delta Temperature Controller Input 100~240VAC output 4~20mA with RS-485 New DTA Series

Omega CNI1633 temperature controller, programmable. It can re-calibrate with ice at 0 degree C. 2 chemical relay 5 Am to control on/off for 2 set points.

Omega temperature control programmable. You can re-calibrate with ice at 0 degree C with thermocouple k type. 2 internal 5Am mechanical relays to control on/off.

This Omega Temperature Controller CNi844 appears new, but is in an open box. Unit is untested. HSC# 60541 HSC Electronic Supply 800-442-5833 Terms & Conditions

3 - temperature relay controllers model 6100 Omega/ 2 of them are rated for 0-1500 degrees F and 1 is 500 degrees C so they are all basically the same. And can be wired to normally open or normally closed if your temperature reaches your set point the output wil turn anything you want on or off that runs on 120/220 vac or dc.