ptfe ball valve for sale, brand-new and used.

1-1/2" 150# FLANGED NILCOR 610XP ST-T-H-S BALL CHECK VALVE Note: This valve is missing the handle. 1. SCOPE Ball Check Valves made from fiber-reinforced Thermoset Resins for corrosive chemical service used in construction of pressurized piping systems.

Cole Parmer Masterflex 7523-60 drive & # 7090-62 pump Cole Parmer Masterflex 7523-60 Cole Parmer Masterflex L/S Computerized Drive. The drive specs: 10-600 rpm, dual voltage 115/230 VAC, and DB15 Connector for remote control.

Check out my Storesother items!APOLLO CONBRACO 2" FLANGED BALL VALVEModel 88A94801 Body: WCB Ball: 316SS Stem: 316SS Seat: RPTFE Packing: PTFE Design: B16.34 CWP: 140psi @ 100F New No Box

DMIC BALL VALVE MODEL: BVH-0750N-1123 ~ NEW ~ Technical Information: DMIC Ball Valve Model # BVH-0750N-1123 Carbon Steel Ports size = 3/4" NPT Seals, bushings, washers = PTFE Teflon 1500 mas psi O-ring material = Viton 2,000 max psi This Item was obtained from the sell off a wafer board manufacturing plant, it is NEW old warehouse stock. This item is guaranteed or your money back!

Product Description Diaphragm Metering Pump, Maximum Pressure 35 PSI, Ball Material Ceramic, Maximum Feed Rate 240.0 GPD, Height 11.7 Inches, Diameter 11.2 Inches, Width 6.1 Inches, Suction Lift 4 Feet, Head and Fitting Material GFPPL, Diaphragm Material PTFE-faced, Seals and O Rings PTFE, 115 Volts RestrictionsNote: 4UP25, 4UP26, 4UP

New! Never Used! 3" ball valve.

SPECIFICATION SUMMARY Flow Pattern Straight (2-way) Service Class General Size 1/2 in. Nominal - 63 Series Valve Material Stainless Steel

Brand new in box. Model 150UTDZMSize 2"Class 150Body CF8MTrim 316 StainlessSeat H-PTFE

Size = 1.5" OD Tubing, Sanitary, Food-GradeModel = SB76666ATETO015 Connection = Butt Weld Type = High Purity CleanFlow 3 piece ball valveMaterial = T316L Stainless Steel all wetted partsPressure Rating = 1500 psi @ ambient temperatures WOG (Water, Oil, Gas)Seat = TFM1600Body Seal = PTFEOverall Length = 7.500"Extended Tube OD Ends are designed for orbital weldersNet weight = 8 lbs.

Click Here. Double your traffic. Get Vendio Gallery - Now FREE!

Jamesbury SP25-B Pneumatic Actuator with 1-1/4" Ball Valve MAXIMUM OPERATING PRESSURE 125 PSI TORQUE AT 100 PSI IS 25 FT-LBS FIGURE 1 4B 3600 TT1 SEATS PTFE BALL/STEM 316SS/316SS MOD A MAX SHUTOFF PRESS PSIG AT 1000 120F PSIG AT 100 375F WSP-PSIG 150 BY BODY-CWP-PSIG 2250 Item is guaranteed to be fully functional, and is covered by our 14-day warranty against defect. This Listing is for (1) Jamesbury Pneumatic Actuator USED.

New..SWAGELOK...1" SS 3-Piece 60 Series Ball Valve, PTFE Seats, FNPT.

Pair of 2" Neles-Jamesbury CWP 600 Ball Valve 300 Series with Flexible Metal Hose connector 1-1/2" x 12" length 2" Neles-Jamesbury CWP 600 Ball Valve Features: - Body and cap forged from high strength MS58 brass for a durable compact design- Brass ball and stem are plated to resist wear and corrosion- Internal entry stem for positive retention- Full port construction for maximum flow capacity- Proven polymeric sealing with no metal t

Welcome to BE Quality Industrial. Most items are purchased from Nuclear Power Plants and all are of the absolute highest standards and quality. You are buying the best of the best for a fraction of the cost.

start_elivehelp_btncode end_elivehelp_btncode

Lot of 2 new Apollo 77c-108-27 2" bronze valves. Two Piece Ball Valve, FNPT Connection, Max. Pressure 600 psi WOG, Full Port, Material of Construction Bronze, Seats PTFE, Stem Material Brass, Handle Locking Lever, Standards MSS-SP-110 Bronze Ball Valves, Full-Port2-pc.

VG1000 Series Ball Valves are designed to regulate the flow of hot or chilled water and, for some models, low pressure steam in response to the demand of a controller in Heating, Ventilating, and Air Conditioning (HVAC) systems. Available in sizes 1/2 through 2 in.

This is brand new, fittings never threaded in.Wasn't going to work for the application. 1-Piece Instrumentation, 40G and 40 Series Part No. SS-45YF8

BK-10 1” (25mm) Polypropylene/PTFE Reliable polypropylene air center section combine with non-metallic clamped casing materials ensure maximum chemical compatibility. Available in a variety of materials and options. Suitable for clean fluids, slurries or up to 1/4” solids Heavy duty air valve Non-metallic wetted components Muffler included Part No.