ptfe ball for sale, brand-new and used.

Swagelok/Whitey SS-62TS4 1/4" Manual Stainless Steel 2-Way Ball Valve Comes with what you see in the pictures. If you don't see it, you probably wont get it. Specifications are from and may vary slightly due to upgrades, options, or revisions this unit may or may not have.

Never Used sandpiper S 15 level 3 ball valve pump. Check valve ball Wetted parts polypropylene Check valve PTFE Santoprene backup/PTFE Check valve seat polypropylene Porting options ANSI Flange 0 100 gph 1 1/2 port up to 1/2" solids No,lube no stall piston double diaphragm design

[ ARO 6662B3-344-C 2 in 120 psi 139 GPM Air Op Double Diaphragm Pump

Yamada DP-20F High Purity PTFE Diaphragm Pump All items are sold as is without warranty unless specifically stated in the posting. This does not mean that the unit doesn’t work, only that we have not tested or checked it out. This may also mean that we are not knowledgeable in that specific item.

[ Sandpiper S20B1A1EANS000 150 GPM 125 psi Air Op Double Diaphragm Pump

Product Description Air Operated Diaphragm Pump, Metallic Double Diaphragm Pump, Air Inlet 1/2 In, Flow 38 GPM, Max Flow 50 CFM, Max Flow 42 GPM, Max Operating PSI 125, Inlet 1 In FNPT, Outlet 1 In FNPT, Port Type Single, Max Dia Solids 1/4 In, PTFE Ball Material, Stainless Steel Body Material, PTFE Check Seat Material, PTFE Diaphragm

Sandpiper Air Operated S05B2K2TPNS000 Double Diaphragm PVDF 100 PSI Pump

ARO PD15P-FPS-PTT DIAPHRAGM PUMPEXCELLENT CONDITION

Technical Specs

.SANDPIPER Model : S07B1K2KPNS000 100PSI 7 BAR Length: 7-1/16" Max. Flow GPM: 45 Max. Temp.: 220 Degrees F Width: 11-13/16" Ball Material: PTFE Body Material: PVDF Operation Type: Air Operated ManufacturerPartNumber: S

Product Description Ball Valve, Electronic Actuated, Size 2 In, FNPT Connection, Voltage 115 VAC, Rated For 1500 psi CWP, 150 psi WSP, Number of Ports 2, Direct Mount, Material of Construction Stainless Steel, PTFE Seats ElectricFeature reversible motors, terminal strip, manual override, and a hardened precision gear train. 1/2" to 2"

NEW SANDPIPER S10B1N1NPAS000. Diaphragm Pump, Air Operated, PVDF, 100 PSI SANDPIPER Item Specifics Check Seat MaterialPVDF Diaphragm MaterialPTFE Height13-13/16" IncludesPump ItemDiaphragm Pump Length7-9/16" Max. Flow GPM23 Max.

Product Description Diaphragm Metering Pump, Maximum Pressure 35 PSI, Ball Material Ceramic, Maximum Feed Rate 240.0 GPD, Height 11.7 Inches, Diameter 11.2 Inches, Width 6.1 Inches, Suction Lift 4 Feet, Head and Fitting Material GFPPL, Diaphragm Material PTFE-faced, Seals and O Rings PTFE, 115 Volts RestrictionsNote: 4UP25, 4UP26, 4UP

Cole Parmer Masterflex 7523-60 drive & # 7090-62 pump Cole Parmer Masterflex 7523-60 Cole Parmer Masterflex L/S Computerized Drive. The drive specs: 10-600 rpm, dual voltage 115/230 VAC, and DB15 Connector for remote control.

Apollo S/S Ball Valve (NEW) #87A70957 2.5" 300# Flange CF8M S/S W/Locking Handle Seat: RPTFE Pkg: PTFE Ball & Stem 316 S/S 720 at 100F Our Item #A495 This item is new but not in original manufacture packaging PLEASE NOTE, WE ONLY SHIP UPS

INGERSOLL RAND ARO 1 Non Metallic Diaphragm Pump, Air Inlet NPT 1/4 Inch, Water Flow 35 GPM, NPTF Inlet/Outlet 1 Inch, Maximum Operating Pressure 120 PSI, Ball Material PTFE, Body Material Polypro, Check Seat Material Polypro, Diaphragm Material PTFE, Maximum Flow 53 CFM, Maximum Flow 44 GPM, Port Flange, Maximum Suspended Solids Diameter 1/8 Inch, Air Operated

BK-10 1” (25mm) Polypropylene/PTFE Reliable polypropylene air center section combine with non-metallic clamped casing materials ensure maximum chemical compatibility. Available in a variety of materials and options. Suitable for clean fluids, slurries or up to 1/4” solids Heavy duty air valve Non-metallic wetted components Muffler included Part No.

Buchi R-200 rotavapor with B-490 heating bath General description Modular construction makes it possible to configure units from two evaporator models, R-200/205, two vacuum controller models, V-800/V-805, and three different glassware assemblies, all supplied with a standard 24/40 joint on the evaporator flask and a 35/20 ball joint on the receiving flask.