pulley bearing for sale, brand-new and used.

2019UD6G.84 New Sanyo Denki, Ball Bearing, 1.1 Amp, 1.8 Degree Step (200 Steps per Revolution), Stepper / Stepping Motors, Part Number 103-775-7241. Each bid quantity is for One (1) Motor. You may bid / buy any number, up to the total quantity available above.

Dunkermotoren Brushed 24 Volt Permanent Magnet DC Electric Motor Details Dunkermotoren Model: GR42x25 Brand new stock 24 Volt 860 mA 14 Watts 3600 RPM rated High-torque Ball-bearing design for long life 3.5" Length x 1.69" Diameter Small pulley mounted on shaft Shaft diameter is 3mm Pulley diameter is 8mm Threaded mounting holes Twisted pair

2020UD6G.84 New Sanyo Denki, Ball Bearing, 1.1 Amp, 1.8 Degree Step (200 Steps per Revolution), Stepper / Stepping Motors, Part Number 103-775-7241. Each bid quantity is for One (1) Motor. You may bid / buy any number, up to the total quantity available above.

2013UD6G.3.12 New T&L (SinoTech), Ball Bearing, 42MM Square (1.65 inch sq.), 1.8 Degree Step (200 Steps per Revolution), Stepper / Stepping Motors, Part Number 42BYG401 - 04A, or 548001016, or 548-001-016. Each bid quantity is for Four (4) Motors. You may bid / buy any number, up to the total quantity available above.

2018UD6G.2.96 New T&L (SinoTech), Ball Bearing, 42MM Square (1.65 inch sq.), 1.8 Degree Step (200 Steps per Revolution), Stepper / Stepping Motors, Part Number 42BYG401 - 06A, or 548001017, or 548-001-017. Each bid quantity is for Four (4) Motors. You may bid / buy any number, up to the total quantity available above.

2010UD6G.13.40 New Sanyo Denki, Ball Bearing, 2 Phase, 42MM Sq. (1.65 inch sq.), 5.3 OHM, 1.8 Degree Step (200 Steps per Revolution), Stepper / Stepping Motors, Part Number 103H5208-10U41. Each bid quantity is for a Factory Tray of (20) Motors.

ebay

HD Harmonic Drive Systems SHG-14-50-2UJ Key Features Common to All Series · High torque · Zero Backlash · Accuracy <1 arc-min (most sizes) · High torsional stiffness · Robust cross roller output bearing · Output flange for direct mounting of load 2UJ Series Features · Conventional Input Shaft These units will ship with a pulley mounted on the input and output shaft. The pulleys show minimal signs of wear.

Up for Auction is a USED Campbell Okmulgee, OK, Wire or Rope Pulley Block - Combination Type Pulley. Has a 3,000 pound working load, weighs about 8 lbs, made of aluminum alloys with steel shafts and bearings. This is a Heavy Duty Professional / Industrial / Utility tool used when installing the large wires onto electrical poles in our neighborhoods and for threading wire or rope overhead from pole to pole, building to building or tree to tree.

Aluminum Pulley or Block With 18" Sheave Net Weight 30 lb. While it shows no use I'll list it as used. Examine the photos carefully.