reverse clamp for sale, brand-new and used.

A really nice used Harig Ultra Grind with the Baldor Motor option. Thanks for looking. See model details below.

This this classic machine is in fine working condition. It has a multi-speed power feed table and quill along with a high and low speed selector for each speed adjusted at the pulley along with a forward and reverse selector . The table is in great shape with only one tiny divot from a drill bit.

Vertical Mitering Band Saw Model VW-18 Series II

SHAFT ALIGNMENT DIAL INDICATOR ROLLER CHAIN JIG MILLWRIGHT & MAINTENANCE IT'S ON EVERY MILLWRIGHT AND MAINTENANCE TOOL LIST A TRUE CRAFTSMAN MUST HAVE AT LEAST ONE IN THEIR TOOLBOX NOTE "TWO ARE NEEDED FOR REVERSE AND NEW METHOD OF ALIGNMENT PROCUDURES OVER 35 YEARS OF EXPERIENCE WENT INTO THIS ONE 6061 AIRCRAFT ALUMINUM

Mitutoyo 513-406T , .0005"/0.01mm X .030"/0.7mm Horizontal Test Indicator Set, 0-15-0/0-35-0, Inch and Metric Mitutoyo Horizontal Test Indicator Set, Graduations: .0005"/0.01mm, Range: .030"/0.7mm, Dial Face: 0-15-0/0-35-0, Includes: Test indicator, .039", .079" and .118' carbide contact points, 3/8" stem, clamp nut, swivel clamp, and (2) holding bars.

HERE IS A NEW SPI BUTTON INDICATOR CLAMP (SNUG)_.THE SAME CLAMP THAT WORKS WITH A STARRETT BUTTON INDICATOR SET 196 , READY TO USE WITH YOUR INDICATOR. THE CLAMP TAKES A 5/16" ROD ON ONE END AND THE INDICATOR END TAKES 1/4" WHICH IS THE SIZE OF A BUTTON INDICATOR SHANK. ALSO CAN BE USED WITH CHAIN CLAMPS FOR REVERSE ALIGNMENT.

HERE IS A NEW SPI INDICATOR CLAMP (SNUG)_.THE SAME CLAMP THAT WORKS WITH A STARRETT MAG BASE 657, READY TO USE WITH YOUR INDICATOR. THE CLAMP TAKES A 1/4" ROD ON ONE END AND THE INDICATOR END TAKES 1/4" WHICH IS THE SIZE OF A BUTTON INDICATOR SHANK. ALSO CAN BE USED WITH CHAIN CLAMPS FOR REVERSE ALIGNMENT IF RODS ARE CUT TO 1/4" .

You are bidding on one (1) used Mitutoyo Micrometer Head # 152-391 The unit is in working order and turns smoothly. It has some cosmetic scratches on the far side of the body opposite the measurement scale which would normally never be seen once installed. There is some light surface wear on the end face of the knob around the thumb wheel.

SpecsMechanical Micrometer Heads; Minimum Measurement (Inch): 0; Minimum Measurement (Decimal Inch): 0.0000; Max

How to Run a Lathe: How to Erect, Care for and Operate a Screw-Cutting Engine Lathe, For the Beginner, Revised Edition No. 19, by O’BRIEN BROTHERS J.J. O’Brien and M.W.

Brand new in unopened bag. Destaco 604 clamp.

LOT OF 4 NEW DE-STA-CO WORKHOLDING CLAMPS --- DE-STA-CO #247-U - 1000 LBS CAPACITY - VERTICAL HANDLE TOGGLE CLAMP --- DE-STA-CO #609 - 300LBS CAPACITY - PUSH - PULL CLAMP --- DE-STA-CO #624 - FLUSH MOUNT - REVERSE ACTION - 700LBS CAPACITY --- DE-STA-CO #202-U - 200 LBS CAPACITY - VERTICAL HOLD TOGGLE CLAMP --- ALL NEW --- I WILL COMBINE SHIPPING

Double-Acting push/pull hydraulic Threaded-Body Cylinder with plunger head Bolt Hydraulic work supports are used to provide a self-adjusting rest for the workpiece during the machining operations. They compensate the work piece surface irregularities,also deflection and vibration under machining loads.&nb

STRONG HAND EXPAND-O PLIERS - SET OF TWO - PE6 & PE10 Some states subject to sales tax. Click "see all details" to view these. We accept all major credit cards & Paypal.

46 Jewelry Supply New York SET OF 6 TWEEZERS MULTI CRAFT. BEADERS, WATCHMAKERS, JEWELERS, MODEL MAKERS, RAILROAD HOB

Check out my Storesother items!LKC 316 STAINLESS STEEL CHECK VALVE 1-1/2" TRI-CLAMP END CONNECTIONS Prevents reverse flow. Be sure to add me to your

This Juki 1942GA was purchased for a particular project that was never implemented. This is a hard to find, heavy duty computer controlled shape tacking machine. Pristine condition.

Singer 20U83 Straight and Zig-Zag Machine (12mm Zig-Zag Stitching)