rope snatch block for sale, brand-new and used.

Up for auction are three McKissick snatch blocks. All items have been used and show signs of wear but work perfectly. All items have been tested and work %100.

Up for auction is a McKissick snatch block. All items have been used and show signs of wear but have been tested and work %100. Please read the description below to make sure you are bidding on what you want.

WESTERN SNATCH BLOCK & TACKLE SIX INCH WIRE ROPE CABLE PULLEY Part Number: H261C6 Up for auction is a 6" Snatch Block & Tackle 3/4" Rope Size. You will be bidding on the item pictured. This item is in working condition.

Don't know much about this item my guess it is a snatch block and it says 24 tons on it so I guess that's what it is look at the pictures before bidding if you have any questions please ask before bidding its about 20lbs and about a 1' tall can take rope from 1 1/2" to 1 3/4" if I have miss labeled this please let me know

USED HEAVY DUTY 3" SNATCH BLOCK FOR 3/8" WIRE ROPE 2 TON (WORKING LOAD LIMIT) HAS MINOR SURFACE RUST ON THE WHEEL, MOVES FREELY. DESCRIPTION USED 3" snatch block for 3/8" wire rope cable. Swivel hook, drop side, bronze bushed with grease fitting.

[ B/A Products Co. 6I-SW8T 16000 Lb Working Load Limit Swivel Shackle Snatch Block

12'' Snatch Block with Red Swivel Hook

COOPER HAND TOOLS CAMPBELL 4091V 6 inch WIRE ROPE TEAM SNATCH BLOCKSThis is a Cooper Hand Tools Campbell 4091V 6 inch single steel side wire rope team snatch block with a screw pin anchor shackle. CONDITION:My item is in used condition with signs of heavy usage. The paint is scratched and scuffed over the entire surface of the block and it is rusted on the bolt that holds the hook to the block.

Snatch block with two different style of line grabbers. 8" Diameter Sheave that can accommodate up to 5/8" wire rope (cable)   Two different line grabbers.  One that connects to the block main pin, and has a vise screw to clamp cable.

This is a new, but with a few scrathces from being handled, McKissick-Crosby N-418, 8 ton, snatch block for a crane or tow truck I presume. Wire rope size 5/8 ~ 3/4". WLL 8.0T @ 4:1, 6.4T @ 5:1 RFID equipped Stock # 108154 6" RB ball bearing Photos are of the item you will receive.

The snatch block is used and shows some wear but still in good working condition. I cannot find any written or weight limit on the snatch block. The pulley appear to be able to handle up to 3/4" rope or cable.

You're bidding on a well made snatch block that has a 12 ton capacity and safety latch. It is 21" long with a 6" diameter pulley that will accommodate 3/4"-7/8" wire rope. It is in good condition with no breaks or repairs.

This lot contains a large snatch-block cable pulley.  The pulley wheel is approximately six inches.  Brand name and capacity are unknown.  There is surface rust present.  Wheel turns f

The snatch block is used but still in good condition. Shipping international will be additional cost.

Mckissick (Crosby) snatch block #10611. for 3/8-1/2" wire rope.6" sheaverated SWL=2 ton new,never used missing safety latch

2 ton snatch block. Wire rope size: 5/16in---3/8in.          N-418

Crosby 12 ton double sheave shackle snatch block 5/8-3/4 rope, model 105184 good used condition. 

This bid is for a 6" logging snatch block in good usable used condition. Shows use but is in very usable condition, no damage. Tight 6" shieve/pulley, no play.

1 Crosby 10 Ton snatch block. Nothing wrong, one of the best brands out there. The name speaks for itself.

Used McKissick Snatch Block 30 Ton 20" Single Sheave 1-1/2" Wire Rope 250# Must ship via freight service. Email for quote. Othe Snatch Blocks available from Crosby, Johnson and McKissick