shaft sleeve for sale, brand-new and used.

Item No. 317 - 0006 Truck shipping only. Specifications: Center height: 6.29 ( 160 mm ) Swivel angle of spindle from horizontal position ( upward ) < 95 degree Horizontal position ( downward ) < 5 degree Rotating angel of spindle for one complete revolution of diving handle 9 degree ( 540 grad.

var itemNumber = window.ebayItemID ?

var itemNumber = window.ebayItemID ? window.ebayItemID : -1; function passpara(){return '&id=1892893&itembgcolor=0xFFFFFF&bordercolor=0x000000&storewindowbgcolor=0xf1f1f1&toptextcolor=0xFFFFFF&bottomtextcolor=0xFFFFFF&str

Shaft sleeve support 6 11/32 in ID 90235 1008 PTEM Philadelphia Mixers Unused This is an unused shaft sleeve made by Philadelphia Mixers, part number 90235-1008. This has some factory preservative which can be seen in the pictures below. Bore: 6 11/32 inches OD of larger tapered side: 7 25/32 inches OD of other side: 7 3/32 inches Height/length through bore: 4 1/2 inches Specifications: MFG: Philadelphia Mixers Model: 90235 1008 Serial: Volts:&nbs

Shaft sleeve for PTEM 24 Philadelphia Mixers Unused This is an unused shaft sleeve made by Philadelphia Mixers. This was a spare part for a PTEM-24. Size: 6 5/8 inches Bore: 6 inches OD: 6 5/8 inches Length through bore: 6 23/32 inches Specifications: MFG: Philadelphia Mixers Model: Serial: Volts: Amps: Phase:

Shaft sleeve titanium for PTEM 26 Philadelphia Mixers Unused This is an unused shaft sleeve made by Philadelphia Mixers for a PTEM-26 mixer/agitator. Titanium Bore: 6 7/16 inches Length through bore: 4.51 inches Stamped in top edge: 818807 Specifications: MFG: Philadelphia Mixers Model: 114 Serial: Volts: Amps: Phase: Dr

Ten (10) Rubber Rollers - 1-1/2" Diameter Rubber Rollers on a 1/2" Aluminum Shaft. This auction is for a collection of ten (10) of these used rollers, that are in great condition, with no nicks, cuts, or dried out sections. These are each 19-3/4" long Rubber Rollers, mounted or pressed onto a 22-3/8" long, 1/2" diameter Aluminum shaft.

This motor is reversible meaning the shaft will spin in either direction. And can be mounted in any direction shaft facing up, down, or sideways. This motor is a 48 frame and also has mounting screws near the bottom edge as used by Rheem/Rudd units.

var itemNumber = window.ebayItemID ?

Description CONDENSER FAN MOTOR 1/3 1075/1 REV 208/230-1-60with capacitor Features:• Installs with all standard 48 frame mounting brackets• Standard shaft leng

THIS IS AN AFTERMARKET MOTOR NOT OEM Packard 3.3 Inch Diameter Motor 115 Volts 1550 RPM Features Ideal replacement for many range hoods. Shaded Pole Totally Enclosed Stud Mounting Automatic Overload Single Phase 60 HZ Rotation is determined by viewing the shaft end Item Specifications

MOTOR CONDENSER 1/4 850/1 208/230-1-60 Features:• Permanent split capacitor (capacitor not included)• Direct drive, air over• Inherently protected• Class B insulation• Rotation determined viewing end opposite shaft• 1/2” dia. shaft w/single flat except where noted**• Plug type electrical connections• Extended through bolts - .3 to .4 lg. (end opposite shaft only)•

Click to Enlarge

Two motors! PORTESCAP 7200 RPM PRECISION DC MOTOR ESCAP 23 L2R 6VDC Model: esca