shaft wheel for sale, brand-new and used.

How to Run a Lathe: How to Erect, Care for and Operate a Screw-Cutting Engine Lathe, For the Beginner, Revised Edition No. 19, by O’BRIEN BROTHERS J.J. O’Brien and M.W.

2 mandrels and a cylinder. Since I have not had them hooked to a motor, I am selling as-is. Craftsman mandrel with 3/8" V belt & pulley wheel.

Sold Individually - NOT as a pair Wheel diameter 1.575 Wheel Thickness 0.430 Shaft Diameter 0.496 x 1.575 Long 90 degree groove on shaft . NEW

BAND SAW UPPER SHAFT HINGE ASSEMBLY FOR 14 INCH BAND SAW This upper shaft hinge assembly for band saws will fit app 90% of the 14" band saws on the market. It replaces the slide block, the shaft for the upper wheel and the tracking/tensioniong setup for the upper wheel. Our most popular band saw part ever!

Feed wheel coupler to attach hydraulic motor with 1" straight shaft to 2" indeed shaft on most older Brush Bandit chippers. Comes with all Grade 8 bolts necessary for installation. We have several of these.

BETTER PACK 333 TAPE MACHIN

STEELPulley / SheaveReducer Sleeveto reduce a 1" Bore Pulley, gear, sprocket, wheels,etc.to fit a Motor witha 3/4" Shaftwith a 3/16" Keyway slot DescriptionThis Pully Reducer Sle

var itemNumber = window.ebayItemID ?

National Hardware V7601 1-7/8-Inch Roller 4-3/8-Inch Stem 7/16-Inch Shaft Standard Rollers, Plain Steel Garage Door Rollers (2-Pack) have a stem diameter of 7/16 in. and are 4-3/8 in. long.

lot of 3 pcs 1.6" Overall .39 shaft .82 haft length

HARD RUBBER WHEELS STEEL HUB BALL BEARING AXLE 5/8" X 9" galv. bolt as axle shaft. lock nuts & washers on the bolts.

Pulley / Sheave Reducer Sleeve to reduce a 3/4" Bore Pulley, gear, sprocket, wheels,etc. to fit a Small Gas Engine / Motor with a 1/2" Shaft with a 3/16" Keyway slot Length is 3"

Pulley / Sheave Reducer Sleeve to reduce a 3/4" Bore Pulley, gear, sprocket, wheels,etc. to fit a Motor with a 15mm Shaft with a 3/16" Keyway slot

Each set INCLUDES 4 of these large, powerful MAGNETS NEW IDEA: More Stable, More Powerful Lab Stirrers ...Working in a lab with magnetic stirrers ??Want to increase capacity and stability of your s

var itemNumber = window.ebayItemID ? window.ebayItemID : -1; function passpara(){return '&id=1906446&itembgcolor=0xFFFFFF&bordercolor=0x000006&storewindowbgcolor=0xf1f1f1&toptextcolor=0xFFFFFF&bottomtextcolor=0xFFFFFF&stripcolor=0x006ab1&auctionclosemessagecolor=0x006ab1&emptyboxmessagecolor=0x006ab1&buttovercolor=0x006ab1&buttoutcolor=0x006ab1&searchtitlecolor=0xFFFFFF&searchbuttbgcolor=0xFFFFFF&searchbutttextcolor=0x000000&searchbutt

695 20mm OD 18.3mm length without the shaft, 23mm with the shaft and the electrodes. 2.3mm tooth wheel gear shaft. See my other high quality Escap Portescap micro motors.

Here is a lot of 2 vintage Durant items.  You get the counter and the wheel/motor combo.  I'm not sure what these were used for, but they look to be in good condition.