stainless steel shaft for sale, brand-new and used.

BRAND NEW RSV3G30D-F25EZ PRESSURE WASHER PUMP PURCHASED DIRECT FROM ANNOVI REVERBERI / AR NORTH AMERICA The AR North America RSV3G30D-F25EZ features a 3/4" hollow shaft with a gas engine flange, operates at 3400 RPM, and has a max PSI of 3000. This pump comes equiped with an Easy Start Valve that eases internal pump pressures that can make cold starts with gasoline engines difficult. AR (ANNOVI REVERBERI) TRIPLEX PRESSURE WASHER PUMP 3.0 GPM 3000 PSI INLET 3/8

USED LUTZ NIRO STAINLESS STEEL DRUM PUMP Shaft FOR FLAMMABLE LIQUIDS. 40" LONG SHAFT BY 1-1/2" DIAMETER. IN GOOD CONDITION 01/PTBNr.111B/S 1797 This is for the tube/shaft only.

Submersible Pump Motor, 1 Ph, 1 HP, 230V, 4 Inch, 3 Wire Brand new motor never used. Original packaging included.

Pacer Water Pump — 160 GPM, 5.5 HP, 2in., Model# SEB2PL E5.5 160 max. GPM, 52 PSI max. and 120ft.

Triplex Plunger Pump FEATURES: Manifold: High strength forged brass for long term use Bolts: Six 6mm grade 12.9 Plungers: A special thick solid ceramic for long life, strong durability and more resilience Crankcase: Precisions die cast, large cooling fins and anodized for maximum heat dissipation. Sight glass, fill and drain plugs. Bearings: Oversized for maximum life and load disbursement, two ball bearings.

Triplex Plunger Pump FEATURES: Manifold: High strength forged brass for long term use Bolts: Six 6mm grade 12.9 Plungers: A special thick solid ceramic for long life, strong durability and more resilience Crankcase: Precisions die cast, large cooling fins and anodized for maximum heat dissipation. Sight glass, fill and drain plugs. Bearings: Oversized for maximum life and load disbursement, two ball bearings.

Sale is for One USED DAYTON MIXER WITH STAINLESS SHAFT AND PROP This has light scratches from normal use This has been tested and runs well Comes as shown with the shaft,mixing blade and mount all ready to go! The mixer shown is the one you will receive Spec's are Mfg- Dayton Model-

var itemNumber = window.ebayItemID ?

var itemNumber = window.ebayItemID ?

Triplex Plunger Pump FEATURES: Manifold: High strength forged brass for long term use Bolts: Eight 8mm grade 8.8 Plungers: A special thick ceramic for long life, strong durability, and more resilience Crankcase: Precision die cast, large cooling fins, and anodized for maximum heat dissipation. Sight glass, fill and side and bottom drain plugs Bearings: Oversized tapered roller bearing for maximum life and load disbursement Bearing Support: Precision die cast and machined to assure c

Triplex Plunger Pump FEATURES: Manifold: High strength forged brass for long term use Bolts: Eight 8mm grade 8.8 Plungers: A special thick ceramic for long life, strong durability, and more resilience Crankcase: Precision die cast, large cooling fins, and anodized for maximum heat dissipation. Sight glass, fill and side and bottom drain plugs Bearings: Oversized tapered roller bearing for maximum life and load disbursement Bearing Support:

Import duties, taxes, and charges are not included in the item price or shipping cost. These charges are the buyer's responsibility. Please check with your country's customs office to determine what these additional costs will be prior to bidding or buying.

START TO FINISH PROJECTS WITH ROYAL KING'S CHOICE POWER CARVING KIT 2-22-TOOTH LANCELOT 2-14-TOOTH LANCELOT 1-18 TOOTH SQUIRE 1-HOLEY GALAHAD ROUND MEDIUM RED 3- INGRAIN FLAP DISC SANDERS 1-24 1-60-1-80 GRIT 1- UNIVERSAL NUT .5/8 CENTER HOLE DISC US GRINDERS POWER CARVING KITS ARE CHOICE SELECTIONS OF OUR MOST POPULAR ACCESSORIES. THESE COMPLETE SETS OFFER A DISCOUNT PRICE COMPARED TO INDIVIDUAL PURCHASES. SAVE $42.00

1/2 HP - 15 GPM - 115 Volts - 1 Phase - 5 Stage - 2 Wire Precision-engineered, high-quality, rugged Signature 2000 Stainless Steel Series Pumps deliver efficient, depend- able performance even in rough, aggressive water. Heads to 1,950 feet and capacities to 65 GPM. Built to deliver long-term, trouble-free service.

Grundfos Model: CM 3-3 A-S-G-V-AQQV- B-A-A-N Horizontal, multistage, centrifugal pump with axial suction and radial discharge port including a Special Designed Mechanical Shaft Seal in the solution AQQE The pump is with axial suction port and radial d

Horizontal, multistage, non-self-priming, centrifugal pump with axial suction and radial discharge port. The compact unit has mechanical shaft seal according to DIN 24960 and through-going motor/pump shaft. Pump and Motor are mounted on a common base plate and all pump components in contact with pumped liquid are made of stainless steel.

[ Dayton High Head Cast Iron 3 HP 3 Phase Centrifugal Pump

Agitator Stainless steel shaft approx.46" prop is approx. 10" great condition. We are Cleveland Process Equipment and specialize in the sales of used Pharmaceutical, Chemical And Plastic machinery.