steel shoulder washer for sale, brand-new and used.

Small Parts Shoulder-Shortening Shim Flat Washer, 18-8 Stainless Steel, 5/8" Bolt Size, 0.626" ID, .875" OD, 0.016" Thick (Pack of 50)

Shoulder-Lengthening Shim Flat Washer, 18-8 Stainless Steel, 1/4" Bolt Size, 0.171" ID, .241" OD, 0.016" Thick (Pack of 50)

Indusco 316 Steel Eyebolt, Not For Lifting, Galvanized Finish, 8" Length, Threads, Imported

Genuine U.S. Military Issue Surplus   Briarwood Fastners Inc. - Shoulder Bolt P/N: 658458 This part cross-references to the following...

NO RESERVE ON THIS LOT You are bidding on 32 boxes of Woodgrip drill screws 12 X 3/4" Metal to Wood Screws. Each box contains 6 bags of 500 for a total of 3000 screws per box. Control Seal EPDM rubber captured under the stamped “dome” Available on all Woodgrip drill screws Reinforced domed shoulder distributes clamp load EPDM washer compressed in three key areas: against the panel, metal wa

You are bidding on Electronic Parts that we have left as excess from our manufacturing factory. The plastic bin totes are not included. We got all the parts into a box 30"x20"x20" at 75Lbs.

Wej-It PD58 Internally Threaded Drop-In Anchor, Carbon Steel, Zinc Plated Finish, 7/8" Diameter, 3-13/16" Length, 5/8"-11 Threads (Pack Of 5) The Wej-It PD58 POWER-Drop internally threaded drop-in anchor includes a wedge mechanism to create a secure hold within solid masonry and solid uncracked concrete, and meets 2000 International Building Code and 2000 International Residential Code specifications.

YOU WILL RECIEVE ONE ANCHOR The Wej-It PD58 POWER-Drop internally threaded drop-in anchor includes a wedge mechanism to create a secure hold within solid masonry and solid uncracked concrete, and meets 2000 International Building Code and 2000 International Residential Code specifications. The anchor body and wedge clip are made of corrosion-resistant zinc-plated on steel. The wedge clip expands within the drilled hole to secure the anchor in place.

Wej-It Ankr-TITE CCAT Wedge Anchor for Uncracked Concrete, Carbon Steel, Zinc Plated Finish, Meets QQZ-325 Type II Class 3 Specifications, 3/8" Diameter, 7" Length, 4-1/2" Threaded Length, 3/8"-16 Threads (Pack Of 50)

(CS-800-203) 8-16x1-1/4" Plastite-Style 48-2 Hex Washer Shoulder TFS INCLUDES: 100 Pieces Brand: Blue Chip Fasteners Type: Unslotted Hex Washer Style: Plastite Style 48-2 Trilobular Thread Rolling Screw Thread: 8-16 Thread Length: 1" Shoulder Diameter: .241" Shoulder Length: .25" Total Length: 1-4/4" Material/Finish: 10B21/1022 Steel Case Hardened-.00015/ Zinc Yellow Available stock is approximately 10,000 Pieces, price discount on volume ordering.

May be used as a spindle-adapter for a wood lathe from LatheCity Included: Morse Taper #2 (MT2) to 1"-8 TPI (x1.5" thread length), steel, 1/4-20 drawbar, RH threads + nut and washer

May be used as a spindle-adapter for a wood lathe from LatheCity

May be used as a spindle-adapter for a wood lathe from LatheCity Morse Taper #3 two in one

LDR Industries - Dielectric Union 1/2"copper sweat

Features: Thin Kerf (2.5mm) - Easy to feed through the workpiece with less material waste. Also allows cutting of thicker material. Anti-Kickback - New shoulder design for additional safety, reduces dangerous kickbacks.

New Direct Supplied Full Warranty Delivery 07-Feb no collection supplier direct Paypal is only payment method option and must be made within 2 days Facom 527pc Master AF + Metric Mechanics Tool Kit Set CM.160A Facom 512pc Metric and Fractional Tool Set (CM.160A) - see (1200x1276) . Contents include, 440.JE18 18 Combination wrenches 6 to 24 mm 440.JU12 12 Combination wrenches 1/4" to 15/16".

For sale here is a brand new set of machined 304 stainless steel tubing spouts. These spouts are made for a 5/16" tap hole as well as for connecting 5/16" tubing to them to be used with any gravity or vacuum system as well as with a drop line for adding a second tap into a bucket or a sap sack. They are machined from 304 stainless steel and have a solid shoulder machined into the spout shaft with a holding washer (also 304 stainless) that is pressed on from the back side.

For sale here is a set of 20 brand new 5/16" diameter stainless steel maple sap / syrup spouts / spiles that are made to use with buckets. They are machined from 304 stainless steel and have a holding washer (also 304 stainless) that is pressed onto the spout from the back side up to a shoulder that is machined into the spout shaft for a solid holding ring.

Title of your page goes here 1941 MACHINE SHOP TOOLS LATHE MILL JIGS FIXTURES FOUNDRY GEAR CUTTING      This is a 568 page, 5 3/4” x 8 1/2”, hardcover book titled The New Encyclopedia of Machine Shop Practice.   The book was edited by George W. Barnwell Professor of Production Practice Stevens Institute of Technology and was copyrighted and published in 1941.