+ Post new Ad

Supporting Blocks & Sets

The average price for current category was $24.75 last month.

There are 3425 ads in this category.

Precision Machinist Steel V Blocks 13-3/4L X 2"W X 6-1/4”H, 142° Vee, 42 lbs.

Precision machinist steel v blocks 13-3/4l x 2"w x 6-1/4”h, 142° vee, 42 lbs.

  • Harker Heights, Texas, United States
  • Aug 31st
This is a set of two large, heavy, solid steel precision machinist Vee blocks. I do not have an extremely accurate measuring tool, but using high school geometry, I calculate the angle to be approximately 142 degrees. Total weight is just over 42 lbs each.
V Block Pair 6” Machinist Milling Angle Plate, Right Angle, Cast Iron

V block pair 6” machinist milling angle plate, right angle, cast iron

  • Harker Heights, Texas, United States
  • Aug 31st
Precision V block, 6.0” long, 2.5” wide, 3.5” high, solid cast iron. Good condition. There are a few scratches and dings from prior use.
Large Double V Block Machinist Work Holding

Large double v block machinist work holding

  • Iron Mountain, Michigan, United States
  • Aug 30th
Double V Block Machinist Work Holding.
Machinist Unusual, Double V, set up Block with clamps

Machinist unusual, double v, set up block with clamps

  • Iron Mountain, Michigan, United States
  • Aug 30th
Machinist Unusual, Double V, set up Block with clamps.
Parallel Set 10 Pair 1/8” Thick 6” long +/-.0002” w/Case SPI 98-446-8

Parallel set 10 pair 1/8” thick 6” long +/-.0002” w/case spi 98-446-8

  • Mechanicsville, Virginia, United States
  • Aug 30th
Parallel Set 10 Pair 1/8” Thick 6” long +/-.0002” w/Case SPI 98-446-8
Brown & Sharpe Ultra Precision Ground 1-2-3 Block Sets 599-750-10

Brown & sharpe ultra precision ground 1-2-3 block sets 599-750-10

  • Webster, Massachusetts, United States
  • Aug 30th
Brown & Sharpe Ultra Precision Ground 1-2-3 Block Sets 599-750-10.
2 QTY 23 Holes Precision 25mm x 50mm x 75mm Blocks Gauge

2 qty 23 holes precision 25mm x 50mm x 75mm blocks gauge

  • Athens, Georgia, United States
  • Aug 30th
2 QTY 23 Holes Precision 25mm x 50mm x 75mm Blocks Gauge ------------------------------------------------------------- Item will come exactly as pictured. If it’s not in the pictures, it’s not included. Please let me know if I have any mistakes, or have any questions regarding measureme
PAIR OF CAST IRON V BLOCKS 3-1/4" V WIDTHS 2-1/2" X 3-1/2" X 6"

Pair of cast iron v blocks 3-1/4" v widths 2-1/2" x 3-1/2" x 6"

  • Ellington, New York, United States
  • Aug 29th
Pair of Cast Iron V Blocks 3-1/4" V Widths 1-1/2" V Depths 2-1/2" x 3-1/2"
Cast Iron V Blocks 3" x 1 5/16" x 2 3/8" Vee Block 75MM Set 2 Pc New Old Stock

Cast iron v blocks 3" x 1 5/16" x 2 3/8" vee block 75mm set 2 pc new old stock

  • Mansfield, Massachusetts, United States
  • Aug 29th
Cast Iron V Blocks - Measuring about 3" x 1 5/16" x 2 3/8" Vee Block, 75MM, Set, 2 Pieces. New Old Stock.
Taft - Peirce 8" V-block

Taft - peirce 8" v-block

  • Addison, Illinois, United States
  • Aug 29th
Used in very good condition Taft - Peirce 8" cast iron V-block . Buyer to pay shipping on 43 pounds . Due to excessive and abusive negative feedback from Canadians , I no longer sell to Canada .
Armstrong No. 1 Machinist Screw Jack Milling Machine Lathe Leveling Jack Vintage

Armstrong no. 1 machinist screw jack milling machine lathe leveling jack vintage

  • Newtown Square, Pennsylvania, United States
  • Aug 29th
This looks like it was never used. Please see pictures. No.
Machinist Set Up Fixture Block 4 X 4 X 4

Machinist set up fixture block 4 x 4 x 4

  • Milwaukee, Wisconsin, United States
  • Aug 29th
Good Used Condition See Pictures for Condition Some Slight Surface Rust
custom ma Vee Blocks Machinist Tool Maker

Custom ma vee blocks machinist tool maker

  • Ormond Beach, Florida, United States
  • Aug 29th
theres as found they have rust on them need cleaned and oiled up heavy well built probally a custom job
V-Block and Clamp Set Hardened Steel 1 5/8" x 1 1/4" x 1 1/4"

V-block and clamp set hardened steel 1 5/8" x 1 1/4" x 1 1/4"

  • Chandler, Arizona, United States
  • Aug 29th
V-Block and Clamp Set Hardened Steel 1 5/8" x 1 1/4" x 1 1/4". In Good Condition” The V blocks looks in good Condition. Works fine.
Two Machinist Grinding Long Swivel Clamps Blocks with Holes Holding Tools T61 MS

Two machinist grinding long swivel clamps blocks with holes holding tools t61 ms

  • Dearborn Heights, Michigan, United States
  • Aug 29th
INA GZ W9 KWSE45 G2-V2 FA520/OS Linear Carriage Block 4"x5"x2" Machinist Tool

Ina gz w9 kwse45 g2-v2 fa520/os linear carriage block 4"x5"x2" machinist tool

  • Dearborn Heights, Michigan, United States
  • Aug 29th
Magnetic v block 65X65X50mm HARDENED & GROUNDED high power set of 2 piece

Magnetic v block 65x65x50mm hardened & grounded high power set of 2 piece

  • Delhi, Delhi, India
  • Aug 29th
BET (BAANI ENGINEERING TOOLS)
Magnetic v block 150X95X75mm HARDENED & GROUNDED high power set of 2 piece

Magnetic v block 150x95x75mm hardened & grounded high power set of 2 piece

  • Delhi, Delhi, India
  • Aug 29th
BET (BAANI ENGINEERING TOOLS)
Steel V Block 50 x 30 x 30mm With Set Of 2 Clamp Premium Quality

Steel v block 50 x 30 x 30mm with set of 2 clamp premium quality

  • Delhi, Delhi, India
  • Aug 29th
bet(baani engineering tools) offers;- steel v block
LOT OF 15 ASSORTED HOLD DOWNS T-BLOCKS BOLTS ZIP OK

Lot of 15 assorted hold downs t-blocks bolts zip ok

  • Ellington, New York, United States
  • Aug 28th
Lot of 15 Assorted Hold Down T-Blocks Bolts Manufactured By: Zip, OK, & Others 5/8"-11 & 3/4"-10 Thread Sizes 1" to 1-3/4" Bolt Head Range 3-1/2" to 9-1/2" OAL **SEE PHOTOS FOR ASSORTMENT**

By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.

Accept All Cookies