thick 13 for sale, brand-new and used.

Up for auction is a 8" face plate for a South Bend 13" Lathe and any other lathe with a 1 7/8x10 threaded spindle. It is a very nice thick face plate with t slots in it to set up items to machine. It has chips at the ends of the t-slots but they aren't terrible.

FOR SALE: ONE SET OF TWO DOUBLE SIDED ALUMINUM 6061 (1/2 13) ADJUSTABLE MACHINIST CLAMPS. CLAMPS ARE SHOWN IN ONE OF OUR CNC MILLS. HARDWARE IS NOT INCLUDED BUT THESE WILL WORK WITH ANY 1/2 13 STUFF YOU ARE USING ON YOUR CNC OR MANUAL MILL.

FOR SALE: ONE SET OF TWO ALUMINUM 6061 (1/2 13) ADJUSTABLE MACHINIST CLAMPS WITH ANGLED TEETH BLOCKS. CLAMPS ARE SHOWN IN ONE OF OUR CNC MILLS IN ACTUAL USE. HARDWARE IS NOT INCLUDED BUT THESE WILL WORK WITH ANY 1/2 13 STUFF YOU ARE USING ON YOUR CNC OR MANUAL MILL.

Call Brett At 309-261-5695 for issues or questions. x3 shelf Aluminum Machinist Collet Fixture Plate Table 9 x 8 x 1" Thick, 2 holes are 1/2"-13 tpi . Plate weighs 8 lbs

4 JAW CHUCK ALUMINUM SPACER BLOCKS4-1/32 LONG X 2-7/16 WIDE X 1" THICK1/2-13 HEX HEAD BOLT WITH NUT21/32 SLOT WIDTH X 1-1/8" BASE WIDTH X 3/4" HEIGHTSET OF 4ITEMS ARE USEDINVENTORY #52757 WE DO OFFER COMBINED SHIPPINGPLEASE WAIT FOR AN INVOICE ON MULTIPLE PURCHASES

This auction is for 1 Standard 6" Billet aluminum Machined vise stop. (DIMENSIONS FOR FITMENT) This vise is designed to mount onto the back of a 6" standard vise. This means brands like KURT, GLACERN, and any other standard 6" vise with 3.875" spacing from center to center of holes, and uses a 1/2-13 thread.

140538 New-No Box, Datamax DP0899348 Lot-3, Slip Clutch Bearings, 8.0mm ID, 15.0mm OD, 13.0mm Thick, HFZ040700D. Item is New, unused, no factory packaging. Austin Surplus SKU: 140538 Location: GRG-R15-P15-S04-A-0001260

140507 New-No Box, mfg-unkn 71704 LOT-6 Reel Spool, 38913-001 13-3/4" OD, 3/32" Thick, 3" ID. Item is New, unused, no factory packaging. Austin Surplus SKU: 140507 Location: GRG-R03-P012-S02-0001050

1000 Dri Seal Yellow Shrink Bands Perfect for many applications HAVE TONS MORE CONTACT IF LARGER AMOUNT NEEDED

9---- National Tool #CH203 - 6 (Hard Core Pins) 13/64" dia x 6" long. Pin dia. = .2035 dia.

35 Brand new Plastic Injection Mold core pins (Priced at just $1.00 each including shipping) . 7/32 diameter +.005 measures .224 diameter with micrometer.Head diameter is 13/32 and 3/16 thick overall length is just over 3 inches long. Feel free to ask any questions.

2---- DME High Performance Core Pins PCL 1506 (7/32" dia x 6" long) Copper composition pins Pin dia. = .219 dia. Heel dia.

3" thick x 2.5" wide x 6" long Copolymer Acetal FDA and USDA Approved Material Product Overview Low moisture absorption High strength, stiffness Easy to machine No centerline porosity in Acetron® GP Many formulation options: Copolymer, Homopolymer, PTFE filled, and Internally lubricated/enhanced wear grade Acetal provides high strength and stiffness coupled with enhanced dimensional stability and ease of machining.

Thes pieces have been sitting in a drawer, one piece is 6" long, the other is 5.75" long, these were purchased as 1/2" nominal thickness, but both pieces are really 7/16" thick and 10/16" wide, they have masking on both sides. Also, I don't have a saw to do custom cuts. Shipping is $13 to the following countries Australia Belgium Croatia Estonia Finland Germany

Unused, this is the Lexan MR10. Size measures about 11.25" by 13" by 1/8" thick. The corners are rounded.

**** THANK YOU FOR VISITING OUR STORE **** ITEM DESCRIPTION PLASTIC SHEETS: 3/8" THICK, 13" WIDE, 12" & 22" LONG (ALL NOMINAL MEASUREMENTS), WAS BASKETBALL BACKBOARD, TOTAL 6#8 OF PLASTIC, FAIR CONDITION (SURFACE SCRATCHES)