threaded shaft for sale, brand-new and used.

This sale is for a brand new Oshkosh rotary switch. You will receive your switch sealed in factory packaging. Characteristics: AAJD Thread Class 2A single mounting facility

This is a STANDARD EXTERNAL THREADED TOOL ADAPTER. It is 5" tall and 5" in bottom diameter. The Threaded Shaft has a diameter of 1/2".

GF Piping Systems CPVC True Union Ball Valve, FPM Seal, 1/2" Socket/NPT Threaded. Please see the photos for details of the actual valve. CPVC body for use with temperatures higher than those handled by PVC True union construction for in-place valve replacement Standard port for smaller valve size and reduced cost Inline valve for connecting two pipes going in the same direction Soc

-MAGNAVON MICROSTOP COUNTERSINK -Model number is 2189 -It has a 3/8" shaft -Uses 3/8-24 threaded countersink cutters -Comes as pictured GREAT BUY

Microstop Countersink Cage Will accept up to 7/8" diameter cutter. Countersink Cage was loose in a tool box but doesn't appear to have been used. Has 1/4" shaft Uses 1/4-28 Threaded Bits I combine shipping when possible.

(1) 6" CORE BIT SHAFT EXTENSION. EASILY ATTACH TO A CORE BIT AND ALLOWS FOR A DEEPER DRILLING CAPACITY. KEEP THREADED AREAS GREASED FOR EASY REMOVAL FROM RIG AND CORE BITS.

Condition: Surplus in excellent cosmetic condition. NO ORIGINAL BOX or BAG.

E59 shop 20 position Selector Switch 59M18-01-1-20N-C Individual section quantity: 1 Overall diameter: 1.190 inches nominal First flat length: 0.250 inches nominal single actuator Switch actuator indexing position quantity: 20 single actuator Iii shaft flat/slot angular location: 180.0 degrees from nonturn device single actuator Style designator: 9 tap, circula

Electro Switch Corp.

Bourns Rotary Switch - 6 Positions / 360 Degree Rotation - 0.1" PC Board Pin Spacing Brand new rotary switch Manufacturer: Bourns 360 degree shaft movement (endless rotation) 6 switch positions Base dimensions: 28 mm x 23 mm 6.3 mm (1/4") diameter, 22 mm long D-Type Shaft 3/8" threaded bushing PC board 0.1" spaced leads ( 7 ) for connection Pin 4 is common

Lot of Tightening Knobs Pulled from a retired photo enlarger, this set of 7 tightening/adjustment knobs was made in Italy. Each is marked Brevett Mod. Dep, Elsa Monza Italy.

** ALL POTS I SELL ARE TESTED AND GUARANTEED GOOD ** LOT OF 1 (one): CTS VINTAGE POTENTIOMETER W/SWITCH 500K OHM (500,000) +/- 20%, AUDIO TAPER SWITCH: TYPE GC RATED 3A - 125vAC, 1A - 250vAC SPST - N.O. (looking at shaft, full CW, is CLOSED, ON. CCW to max rotation is open, off.

This auction is for a nice, clean, new dual potentiometer with switch. * Both potentiometers are nominally 50K-Ohm with linear taper. * The switch is controlled by the inner shaft, open when fully CCW.

This auction is for a nice, clean, new dual potentiometer with switch. * The inboard potentiometer is nominally 200-Ohm with linear taper. It is controlled by the outer shaft.

SquareTrade © AP6.0 1 NEW GEMINI AIR PNEUMATIC ROTARY ACTUATOR MODEL 412 This is a Fixed Auction for up to 1 New Pneumatic Gemini Valve, Inc. Rotary Actuators, No. 412.

304200T No-Machine Acme Leadscrew Kit, for 8020 style Aluminum T-slot installation. Can be used with 10 or 15 series extrusions with at least two slots. ie, 1 x 2 or 1.5 x 3 and larger.

C6409-60004 HP replacement motor. High torque. Shaft has 14 point gear 0.37” in diameter.

Anti-Backlash Precision Class C7 Ball Screw CNC Router Mill Plasma Laser & Automation Machines Price include ball screw & Ball Nut only Ball screw machined at the end and the front shaft Support unit are available with all nut and clamp assembly check other auctions or contact us Ball Screw Precision Class C7