threaded standoffs for sale, brand-new and used.

(8) STANDOFFS / ROD COUPLERS / ROD CONNECTORS / SPACER NUTS / ADAPTER NUTS / LONG NUTS ZINC-PLATED STEEL, 3/8"-16 TPI New old stock (NOS). Standoffs / Rod Couplers / Rod Connectors / Spacer Nuts / Adaptor Nuts / Long Nuts. 3/8"-16.

M5 x 0.8 - 8.00mm Blind Threaded Standoffs - Quantity: 67 - These standoffs, which use the proven self-clinching design, install with a squeeze in punched or drilled round holes - and become permanently mounted in the thin sheet. When blind-threaded types are used, outer sheet surfaces are not only flush, but closed as well. Use the third photo to understand the dimensions listed below.

Electronic Component

Lot of 1100 *NEW* RAF 1" Long Hex Standoffs Spacers #4-40 Threaded Class 3A

Stretcher Bars USA Product Information:- Stainless Steel Standoff 1/2" diameter x 3/4" length Lockable Pack of two (2) pieces Polished Finis

FREE SHIPPING TO THE LOWER 48! Fixture Plates: All plates are 1.375" thick, dual layer aluminum fabrications, anodized for surface toughness. Laser engraved reference scales provide 1/8" increments

304242 12" nut travel, acme leadscrew kit 1/2-10 thread, single start, right hand No End Machining required Includes: 12" travel acme threaded rod ( 14.75 long), low carbon steel, oil finish 2 pieces, 1/2 ID flanged bearings, 5/16 width, 1 1/8 mounting bore, flange is .072w x 1.265 dia Threaded Shaft Clamp preloads bearings and prevents end play.

304240 6" nut travel, acme leadscrew kit 1/2-10 thread, single start, right hand No End Machining required Includes: 6" travel acme threaded rod ( 8.75 long), low carbon steel, oil finish 2 pieces, 1/2 ID flanged bearings, 5/16 width, 1 1/8 mounting bore, flange is .072w x 1.265 dia Threaded Shaft Clamp preloads bearings and prevents end play.

Special offering of 4 complete sets of this item . 304244 24" nut travel, acme leadscrew kit 1/2-10 thread, single start, right hand No End Machining required Includes: 24" travel acme threaded rod ( 26.75 long), low carbon steel, oil finish 2 pieces, 1/2 ID flanged bearings, 5/16 width, 1 1/8 mounting bore, flange is .072w x 1.265 dia Threaded Shaft Clamp preloads bearings and prevents end play.

Lot of 10 --yes 10 New 1/4 - 20 threads Threaded COUPLER Nuts These are extra long when compared to standard coupler nuts --lots of thread length.and a thicker wall on them too. . Nuts are about 1-3/4" inch long 7/16 " wrench holds them.

Lot of 25 --yes 25 New 1/4 - 20 threads Threaded COUPLER Nuts These are extra long when compared to standard coupler nuts --lots of thread length.and a thicker wall on them too. . Nuts are about 1-3/4" inch long 7/16 " wrench holds them.

Lot of 50 --yes 50 New 1/4 - 20 threads Threaded COUPLER Nuts These are extra long when compared to standard coupler nuts --lots of thread length.and a thicker wall on them too. . Nuts are about 1-3/4" inch long 7/16 " wrench holds them.

Lot of 3 --yes 3 New 1-1/8" - coarse threads Threaded COUPLER Nuts . Couplers are about 3" inch long 1-1/2 " wrench holds them. .

Lot of 5 --yes 5 New 1" - 7 threads Threaded COUPLER Nuts . Couplers are about 2-1/2" inch long 1-1/4 " wrench holds them. .

Crimp-on -Keystone Standoff fully threaded for 6-32 screw Often called swage standoffs because you permanently crimp them into a panel -chassis or PCB. Qty(10pc) NOS

Payment option: Only PayPal is Accepted Item will be shipped immediately on the same or next business day of receiving full payment. Shipping policy: