thru bolt for sale, brand-new and used.

New INGERSOLL-RAND 3/4" DR 5200rpm Super Heavy Duty New Retails for $2,800, don't pass this up !!

Half off original retail, brand new. Similar to the Survivor Series 195 model. Please see my other listing for 1 more of the same model new.

Item# 4194 - 20" X 60" WEBB GAP BED ENGINE LATHE Equipped With: Swing Up Chuck Guard Hardened and Ground Bed Ways in Good Condition Thread Chasing Dial 12-1/2" Dia. 3-Jaw Chuck with 2-Piece Chuck Jaws with Hard Reversible Top Jaws Hole Thru The Chuck: 4" Chuck Backi

This is a NEW Rocker Arm For the 1 1/2 1 3/4 & 2 Hp Size... Hercules, Economy, Arco & Jaeger Hit & Miss Or Throttle Governed Gas Engines.. This is All new, Cast Out Of Cast Iron, Done In A foundry, Professionally Machined Ready To Put On Your Engine Adjust & Run !!!

1 1/4 ” 1500 Weld Neck Flange A/SA182 SCH 80 B16.5 WNRF F316/F316L You are bidding on a

1/2 ” 1500 Weld Neck Flange A182/SA182 SCH 160 B16.5 WNRF F316/F316L You are bidding on a

1/2 ” 400/600 Weld Neck Flange A182 B16.5 WNRF F316/F316L Kerkau You are bidding on a

6” 150 Weld Neck Flange SCH 40 A/SA 182 B16.5 WNRF F316L You are bidding on a

3” F347/F347H Weld Neck Flange SCH 600 SA 182 B16.5 WNRF You are bidding on a

2” 1500 Weld Neck Flange SCH 900 A/SA 182 B16.5 WNRF You are bidding on a

1 1/4 ” 1500 Weld Neck Flange SCH 80 1500 A/SA 182 WNRF B16.5

3” Stainless Slip-On Flange Raised Face150# A/SA182 F316L B16.5 SORF You are bidding on a

3/4 ” Stainless Threaded Flange 150# SA/A182 F316/316L B16.5 THAN You are bidding on a

You are buying a brand new Cylinder Head Assembly for a Military Generator model MEP-802 MEP-812 this is a 5 KW unit. These will work in the 60hz or 400hz models as the prime movers are the same. Cylinder Head fits Lister Petter LPW2 and Onan DN2M 2 cylinder Diesel engines also.

Description ELEMENT, 2-7/8" SQUARE FLANGE [ 480V 5000W 1PH ] [ 2" CTRS BOLT HOLES, 19-1/4" LONG INSIDE, 19-9/16"OD, W/THERMOWELL [TERMINALS {STUD - #8-32, STERO DISHWASHER SC-1 THRU SC-9, SCT, SD2RA, SDRA, SDRA-PKG, STBUW, STPC, STPCW, STW, SYSTEMATIC, UTENSIL

PROTECH Furnace Motor - 1/6 to 1/2 hp 120/1/60 (1075 rpm/4 speed) 51-23012-41 Technical Data: HP: 1/6 - 1/2 No. of Speeds: 4 High Speed (RPM): 1075 Input Voltage (V): 120 No. of Phases: 1 Frequency (Hz): 60 Rotation Direction (OSE): Reversible Run Capacitor (uF/V): 5/370, 7.5/370, or 10/370 FLA at 120V (A): 7.30 Shaft Diameter (in.): 1/2 Motor Body Diameter (in.): 5-5/8 Keyed/Flat Shaft Length (in.)

PROTECH Condenser Motor - 1/3 hp 208-230/1/60 (1075 rpm/1 speed) 51-23053-11 Technical Data: HP: 1/3 No. of Speeds: 1 High Speed (RPM): 1075 Input Voltage (V): 208 Input Voltage (V): 230 No. of Phases: 1 Frequency (Hz): 60 Rotation Direction (OSE): Reversible Run Capacitor (uF/V): 5/370 FLA at 230V (A): 1.75 Shaft Diameter (in.): 1/2 Motor Body Diameter (in.): 5-5/8 Keyed/Flat Shaft Length (in.):

PROTECH Condenser Motor - 1/5 hp 208-230/1/60 (1075 rpm/1 speed) 51-23055-11 Technical Data: HP: 1/5 No. of Speeds: 1 High Speed (RPM): 1075 Input Voltage (V): 208 Input Voltage (V): 230 No. of Phases: 1 Frequency (Hz): 60 Rotation Direction (OSE): Reversible Run Capacitor (uF/V): 3/370 (230V), 5/370 (208V) FLA at 230V (A): 1.30 Shaft Diameter (in.): 1/2 Motor Body Diameter (in.): 5-5/8 Keyed/Fla

Whitney Metal Tool Co.Metal Punch Press No 1616-2Preowned in very good condition with no breaks, cracks, repairs.For dies 3/8 to 1/4The lever moves with ease and all appears to be in great working order as intended.Has three holes to securely bolt to your work location.Ready to go.Extremely well made heavy duty punch from a USA company from Rockford Illinois est in 1907.