vise stop for sale, brand-new and used.

GUNSMITH & GUITAR MAKER'S DREAM VISE-PARROT TILT VISE This is the perfect vise for gunsmiths luthiers and any other craftsman! The Parrot Vise swivels a full 360° like most bench vises, but you can also pull it from its base and replace it on its side to hold things vertically.

GUNSMITH'S DREAM VISE-PARROT TILT VISE WITH PROTECTIVE JAWS PADS This is the perfect vise for Gun Smiths, Guitar makers and any other craftsman! This listing includes one pair of protective padded jaws. The Parrot Vise swivels a full 360° like most bench vises, but you can also pull it from its base and replace it on its side to hold things vertically.

GUITAR MAKER'S DREAM VISE-PARROT TILT VISE This is the perfect vise for luthiers and any other craftsman! The Parrot Vise swivels a full 360° like most bench vises, but you can also pull it from its base and replace it on its side to hold things vertically. It is designed so you only need to tighten the jaws to stop the vice from swiveling.

These are new USA Made 3/4" mill vise work stops. I manufacture these and sell therm to SPI, ENCO, MSC you can look up in their catalogs and see them. These fit 99% of all the mill vises, like Kurt, SPI Chinese, etc.These are a new better design the screws now clamp from the side eliminating that little ball and it clamps much tighter now.

This auction is for 1 Standard 6" Billet aluminum Machined vise stop. (DIMENSIONS FOR FITMENT) This vise is designed to mount onto the back of a 6" standard vise. This means brands like KURT, GLACERN, and any other standard 6" vise with 3.875" spacing from center to center of holes, and uses a 1/2-13 thread.

These are new USA Made 3/4" mill vise work stops. I manufacture these and sell therm to SPI, ENCO, MSC you can look up in their catalogs and see them. These fit 99% of all the mill vises, like Kurt, SPI Chinese, etc.These are a new better design the screws now clamp from the side eliminating that little ball and it clamps much tighter now.

These are new USA Made 3/4" mill vise work stops. I manufacture these and sell them to SPI, ENCO, MSC you can look up in their catalogs and see them. These fit 99% of all the mill vises, like Kurt, SPI Chinese, etc.These are a new better design the screws now clamp from the side eliminating that little ball and it clamps much tighter now.

UP FOR SALE IS THIS ENCO 209-9007 CAST ALUMINUM VISE STOP IN VERY GOOD GENTLY USED CONDITION WITH THE ORIGINAL BOX. PLEASE ASK QUESTIONS BEFORE YOU BID. THE BUYER WILL PAY $4.95 FOR PACKING AND SHIPPING TO THE LOWER 48 VIA USPS PRIORITY.

These are new USA Made 3/4" mill vise work stops. I manufacture these and sell therm to SPI, ENCO, MSC you can look up in their catalogs and see them. These fit 99% of all the mill vises, like Kurt, SPI Chinese, etc.These are a new better design the screws now clamp from the side eliminating that little ball and it clamps much tighter now.

XACT USA Made Milling Machine - Easy Vise Sto

575 N. Hague Ave Columbus, Ohio 43204 Phone # 1-800-543-5998 After purchasing, pay instantly with your credit card through PayPal! f

For sale: A set of (two) low profile vise stops made from aluminum 6061 and fitted with stainless hardware. This stop can be used from the left or right hand side. The pins are both set BELOW the vise jaw.

This is a must for anyone running a Bridgeport or any Knee mill First up an over sized vise stop roughly 1.500 wide , second a regular size I made 1.125 wide hardened and ground. The last is a solid Brass Quill stop I also made

var itemNumber = window.ebayItemID ?

Piston type air cylinder with extension and return of jaw under air pressure. Amount of pressure may be controlled to suit the operation by use of an air regulator (not included). The jaw opening may be regulated by means of a stop rod (pictured as installed and loose) attached to the back of the movable jaw.

Here is a pair of vise step jaws for 4” Kurt and Kurt type Angle Lock style vises. The jaws are .500 thick, 1.300 high, and 4” long. The steps are .090 by .300 The rear jaw has a removable stop that can be mounted at either end The mounting holes line up perfectly with my REAL Kurt 4" Angle Lock Vise.

Untitled Document New Pin Vise with Wood Handle Jewellery / Watchmak

Fits the most popular 5&6 jaw width milling or machine vises Bolt-on design, requires no modification to vise Will work in left or right hand location

For sale: A set of (two) vise stops made from aluminum 6061 and fitted with stainless hardware. A wrench will be included with every purchase of one set. If you buy 3 sets (or 6 stops at once) We will include one FREE stop and an extra wrench.