arbor plates for sale, brand-new and used.

Your Bidding on a good condition Amp MFG in USA 126840-1 REV. C3 Arbor Frame for Press. See pics as this is what your bidding on, i believe this is missing the top bar and possible something else.

Your No. 1 Choice for Press Accessory Solutions We have 6 of these stocky little bars (THE GUY'S IN THE BACK CALL THEM "BITTY BARS") measuring 1" X 3/4" X 4.25”, in our shop. They were designed for use on our 6 Ton Famco arbor press where they support 12000 lbs.

These bars were designed for use on 2 Ton arbor presses where they easily support 4000 lbs. over the anvil wheel slot span of less than 1.42”. They are also useful as bench blocks, shims, and set-up blocks.

These bars were designed for use on our 1 Ton Palmgren arbor press where they easily support 2000 lbs. over the anvil wheel slot span of less than 1.25”. They are also useful as bench blocks, shims, and set-up blocks.

These 3 Ton Press Bars used flat (4 Ton used on edge), measuring 1/2" X 3/4" X 4.25, were designed for use on a 3 ton arbor press where they support 6000 lbs. over the anvil wheel slot span of 2” or less. These FULLY GROUND matched bars are handy for other uses such as set-up blocks and shims.

We have 4 of these stocky little bars (THE GUY S IN THE BACK CALL THEM "BITTY BARS")measuring 1"X3/4" X 4.25”, in our shop. They were designed for use on our 6 Ton Famco arbor press where they easily support 12000 lbs. over the anvil wheel slot span of less than 2.75” They often find themselves over on the 30 ton “H” frame press as set-up blocks, blocking, or load spreading blocks in heavy load situations.

These LONG bars are our finest press plates yet! these 20 ton plates are precision laser cut from high strength steel. They support from 20 tons, over a gap of 4.25".

Our X-BARS, BIG BARS and Press Plates are proudly used around the country by: Farm, Aviation, Auto and Heavy Duty shops, plus Racers, Marinas, Machine Tool, Industrial and Hobbyists of all descriptions. Sold in Matched Pairs

Insert plates for the Delta Unisaw "Junior" table saw Now you can replace that broken and/or chewed up OEM die cast insert plate on your valuable vintage Unisaw Junior saw. We have three styles of insert plates now available for the Junior. The listed price is for one insert style of your choice.

Note regarding fit: Measure your inside, front to back, bed gap. These 4 bars are intended for stand alone use on 20 ton presses with, front to back, gap of about 4.25". These are the most economical press bars on the internet...shipped FREE right to your door!

DESCRIPTION: NEW OLD STOCK, 2 FLARE CUP WHEELS. THEY MEASURE 2"/1 1/2" X1" X 3/8" ARBOR . .

var itemNumber = window.ebayItemID ?