Up for sale is a little used elevated aluminum scaffold or work platform. This is a government surplus item that we purchased recently. We have not attempted to build it and we believe, but can not guarantee, that all the pieces are present.
FEDERAL SIGNAL JETSTROBE JETSTREAM REFLECTOR END PLATE BRACKET PART Z8552442B Up for your consideration is this recovered Federal Signal JetStrobe reflector end plate. It will fit models SJL1P, SJL2P and SJL3P. Also, please be sure to see the other JetStrobe replacement parts we have listed.
Tricks & Secrets of Old-Time Machinists: Hints and Kinks Provided by the Readers of American Machinist Magazine in 1915 and 1916, Volume 2, originally published in American Machinist Magazine, compiled, edited and published by Lindsay Publications, 2008. 5 1/2 x 8 1/2 paperback, 96 pages. ISBN 1-55918-371-3.
Aluminum Square Tubing – 1/2" OD x 1/16” x 24" Long NEW, .062, .5 IN, Description – These are a product of our solar panel division. They measure 1/2" OD x 1/16” x 24 inch. They are strong and easy to work with and are a 6063 T5 type aluminum.
Aluminum Round Tubing - 1" OD x 1/16” x 48" Long NEW, .062, .75 IN Description –They measure 1" OD x 1/16” x 48 inch. They are a 6063 T5 type aluminum, strong and light. They have no finish and may come with rub marks, scratches, and scuffs but will be straight with no dents.
Aluminum Flat Diamond Plate Sheet Stock 1 in x 48 in, 1/16 thick, 1in, 1 in, 1”, New Description –They measure 1 x 48 inch. This also goes by the names of Tread Brite and Has Plate. They are easy to work with and are a 3003 type aluminum.
Aluminum Flat Diamond Plate Sheet Stock 6 in x 48 in, 1/16 thick, 6in, 6 in, 6”, New Description –They measure 6 x 48 inch. This also goes by the names of Tread Brite and Has Plate. They are easy to work with and are a 3003 type aluminum.
Aluminum Flat Diamond Plate Sheet Stock 12 in x 48 in, 1/16 thick, 12in, 12 in, 12”, New Description –They measure 12 x 48 inch. This also goes by the names of Tread Brite and Has Plate. They are easy to work with and are a 3003 type aluminum.
Aluminum Flat Sheet Stock 12 in x 48 in, 1/4 thick, .25in, Bar, USA! Description –This measure 12 x 48 x .25in thick. They are easy to work with and are a 5052 type aluminum, which is basically the same as 6061, just a little easier to work with.
Aluminum Round Tubing – 1.25" OD x .090” x 48" Long NEW, .062, .1 1/4 IN. Description –They measure 1.25" OD x .090” x 48 inch. They are a 6063 T5 type aluminum, strong and light.
******The warning light comes on when switched to plasma cutting or MMA mode, I have never used or tested the TIG mode but the light is not coming on if its on this setting when turned on. I had a problem before with the warning light coming on but it went away on its own and worked fine for several months. The light may go away again on its own or may have something loose inside or may need to be serviced.
By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.
