THIS ITEM IS A MINIATURE, PANEL MOUNT, POTENTIOMETER AS FOLLOWS: CLAROSTAT P/N: 48M-25k VALUE: 25K (25000) OHMS, +/- 20% LINEAR TAPER CERMET ELEMENT GOLD PLATED SOLDER TERMINALS DIM: .625" DIA X .435" BEHIND PANEL SHAFT: 1/8" X 1/2"L New, old stock, tested good, with mounting hardware. B
Overview The MA860H is a high performance microstepping driver based on pure-sinusoidal currentcontrol technology. Owing to the above technology and the self-adjustment technology (self-adjust current control parameters) according to different motors, the driven motors can run with smaller noise, lower heating, smoother movement and have better performances at higher speed than most of the drivers in the markets. It is suitable for driving 2-phase and 4-phase hybrid stepping motors.
Key Features High performance, cost-effective Supply voltage up to 50DC Output current up to 4.5A Self-adjustment technology Pure-sinusoidal current control technology Pulse input frequency up to 300 KHz TTL compatible and optically isolated input Automatic idle-current reduction 16 selectable resolutions in decimal and binary, up to 51,200 steps/rev Suitable for 2-phase and 4-phase motors Support PUL/DIR and CW/CCW modes Short-voltage, over-voltage, over-current protections
NEW 2 phase Mirco stepper motor Driver High performance 4.2A 50V Stepping motor driver Bipolar ( A+, A-, B+, B-) stepping driver, Capable to drive up to 50V @ 4.2A Per phase Features
You get one box of 5000 senco 1 1/4 inch 18 gauge Brad nails one box of 5/8 inch 18 gauge Brad nails 10,000 count and one box 1 inch 18 gauge Brad nails 10,000 count That is a total of 25,000 nails The 5/8 inch and the one inch have brown painted heads Which is great for paneling The senco 1 1/4 inch are unpainted heads Shipping is fast and free Money back if not happy for any reason
By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.
