3 16 bolt for sale, brand-new and used.

12V Heavy Duty Linear Actuator - (180lbs Thrust) 12" Stroke Move up to 180 lbs for under $130! Our heavy duty linear actuators can be used in place of pneumatics and hydraulics. The heavy duty linear actuators are driven by high torque brushed DC gearmotors coupled to an ACME screw to create a linear drive.

12V Heavy Duty Linear Actuator - (115lbs Thrust) 10" Stroke Move up to 115 lbs for under $130! Our heavy duty linear actuators can be used in place of pneumatics and hydraulics. The heavy duty linear actuators are driven by high torque brushed DC gearmotors coupled to an ACME screw to create a linear drive.

12V Heavy Duty Linear Actuator - (180lbs Thrust) 8" Stroke Move up to 180 lbs for under $130! Our heavy duty linear actuators can be used in place of pneumatics and hydraulics. The heavy duty linear actuators are driven by high torque brushed DC gearmotors coupled to an ACME screw to create a linear drive.

12V Heavy Duty Linear Actuator - (180lbs Thrust) 2" Stroke Move up to 180 lbs for under $130! Our heavy duty linear actuators can be used in place of pneumatics and hydraulics. The heavy duty linear actuators are driven by high torque brushed DC gearmotors coupled to an ACME screw to create a linear drive.

16" Parker 406800XRMS Linear Actuator

New Thomson TWN-16-OPN Linear Pillow Block Bearings 1" Inside Diameter, Heavy-Duty 1,560lb Load Capacity

You are buying a United Electric Controls J6-270 Pressure Switch. 0-200 PSI. New in Box.

You are buying an Allen Bradley 1495 1495-G4 NC Contact- Early Break Switch Motor Control. New in Box. Save $$$ here on this item!

You are buying a quantity of 175 CR383RK25 terminal blocks with end plates. Eaton Cutler-Hammer. New in Box.

Description: Emco Compact 8 Lathe 4 Way Tool Post. Customized. Approx.

Body is 5 1/2 in long not including shaft, shaft is 1 3/8. mounting area is 3.1/2 by 3 1/2. If you put the tape measure around the body its 10 inch shaft has flat spot [ for lock or keyway?] .bolt hole to bolt hole 2 7/8 shaft is 7 7/16 [ 11MM] Brand new mint never used.

Pictures are of actual item you will receive. Technical Specs Item Direct Drive Blower Motor Motor Application HVAC/R Motor Sub Application Direct Dr Fan/Blower Motor Type PSC Enclosure Open Air-Over HP1/2 Nameplate RPM1075 Voltage115