3 8 aluminum bolts for sale, brand-new and used.

Great kit for a DIY poultry plucker like the whizbang! For sale is an aluminum plate for a DIY poultry plucker, Steel flanged shaft, Barrel, 2 Bearings (pillow blocks), drive and driven pulleys, and 125 plucking fingers. I've attached a picture of a blank plate and also one with the fingers installed.

Great kit for a DIY poultry plucker like the whizbang! For sale is an aluminum plate for a DIY poultry plucker, Steel flanged shaft, 2 Bearings (pillow blocks), drive and driven pulleys, and 168 plucking fingers. The fingers do not come installed, you will have to do that yourself.

Beeswax foundation rollers Maintenance instruction.Technical characteristicsThe size of a cell is 5,4±0,05 mm.Width of an engraving is 300 mm.Material of an engraving of plasticityDimensions:Length is 420 mm.Width is 150 mm.

******ABSOLUTELY NEW, NEVER USED, WITH ORIGINAL PACKAGING & COVERS, NOT IN BOX****** PLEASE SEE BELOW TO IDENTIFY CONFIGURATION OF PART#'S AFTER 3051C 3051C Coplanar Pressure Transmitters Ordering Information H The Standard offering represents the most common options. The starred options (

Homac Spade Connector This is NEW with bolts, Connector from Homac, never used or damaged. For deadfront padmount transformers with 4-hole NEMA spade secondary bushings.

eBay Template v2.5

eBay Template v2.5

eBay Template v2.5

Hi, up for sale is 5 sets of small, aluminum, "2 hole" pins. These measue 1-1/8" O.D., and will fit holes from 1/2" to 1-1/16" , and are very light weight, but strong. These have a 45 degree taper with 1/2"-13 removable threads, 2" long, with knurled nuts.

Hi, up for sale is 5 sets of small, aluminum, "2 hole" pins. These measue 1-1/8" O.D., and will fit holes from 1/2" to 1-1/16" , and are very light weight, but strong. These have a 45 degree taper with 1/2"-13 removable threads, 2" long, with knurled nuts.

Hi, up for sale is 5 sets of Mini, aluminum, "2 hole" pins. These measue 1-1/8" O.D., and will fit holes from 1/4" to 1-1/16" , and are very light weight, but strong. These have a 45 degree taper with 1/4"-20 removable threads, 2" long, with knurled nuts.

Now with Knurled nuts! Hi, up for sale is one lot of 5 sets of 1-1/8 inch O.D., aluminum, "2 hole" pins. These measue 1-1/8" O.D., and will fit holes from 1/4" to 1-1/16", and are very light weight, but strong.

Phoenix Measurement SolutionsYour Measurement Solution Source! GPS Antenna Tripod Ideal for GPS and machine-control applicationsHeavy duty aluminum with collapseable 2 meter center staff thatrotates 360-degrees

1-1 Screen Printing Press & Stencial Isolator Based on the customers and market, our company R&D this multi-functional 1-1 screen press, it overcomes these shortages from traditional press, such as without micro-devices, only one fixed pallet, and can not put on the T-shirt, pillow, bag and so on. This press is especially suitable for printing non-woven environment-friendly shopping bags and T-shirts with small amount.

Aluminum Shelves with Rollers and Dividers!!!The shelves are 24" wide and 27" deep, BRAND NEW. It is a set of 8 shelves, including 88 aluminum dividers and sets of rollers. Heavy-duty aluminum shelves Plastic front in two different sizes Rollers Aluminum dividers 24" wide 27" deep When asking for freight please let us know whether it is commercial or residential and whether you have a lift gate or not.

eBay Template v2.5