3 of 3200 for sale, brand-new and used.

FREQUENCY VARIABLE DRIVE 2.2 KW VFD INVERTER

FREQUENCY INVERTER 2.2 VFD KW VARIABLE DRIVE

Schneider Electric Variable Frequency Drive - Altivar 212 ATV212HU30M3X 3kW/3HP This product is new without packaging or documentation, the documentation is available from the manufacturers web site. This unit was purchased for a for a project that was never started, it has been powered on, tested and reset to factory defaults. Specs are from manufacturers web site: Main

Overview The MA860H is a high performance microstepping driver based on pure-sinusoidal currentcontrol technology. Owing to the above technology and the self-adjustment technology (self-adjust current control parameters) according to different motors, the driven motors can run with smaller noise, lower heating, smoother movement and have better performances at higher speed than most of the drivers in the markets. It is suitable for driving 2-phase and 4-phase hybrid stepping motors.

Key Features High performance, cost-effective Supply voltage up to 50DC Output current up to 4.5A Self-adjustment technology Pure-sinusoidal current control technology Pulse input frequency up to 300 KHz TTL compatible and optically isolated input Automatic idle-current reduction 16 selectable resolutions in decimal and binary, up to 51,200 steps/rev Suitable for 2-phase and 4-phase motors Support PUL/DIR and CW/CCW modes Short-voltage, over-voltage, over-current protections

Xinje 3 Phase Stepper Drive DP-508S-L DP-508S Up to 80VDC 5.0A 200Hz New

Leadshine 2 phase stepper motor 8.5NM 6.0A 86HS85+M542-05 2 phase stepper drive M542-05

Xinje 3 Phase Stepper Drive DP-7022 Up to 220VAC 7.0A 200Hz 300 Subdivision New

Leadshine 2phase motor 4.5NM 3.0A 86HS45+M542-05 Leadshine 2phase stepper Driver M542-05

Xinje 3 Phase Stepper Drive Drive DP-7022C Up to 220VAC/336VDC 7.0A 200Hz New

Single Axis TB6600 0.2-5A CNC Engraving Machine Driver Controller Stepper Motor

Single Axis TB6600 0.2-5A CNC Engraving Machine Driver Controller Stepper Motor

Brand New High Performance NEMA23 Stepper Motor CNC Driver 2M542 4.2A Controller

what's in box? 1x 34HS5435B , 1600oz-in/3.5A dual shaft 4 lead wire 1 x DM860 24V-80V DC peak current 7.8A

Single Axis TB6600 0.2-5A CNC Engraving Machine Driver Controller Stepper Motor

WHAT'S IN BOX ? 4pcs&nb

Kinco Stepper Driver 2M2280N Single Phase AC 220V +/-15% 50Hz 2~128 Micro Step New

220V 2.2KW WATER-COOLED SPINDLE MOTOR WITH 2.2KW INVERTER VFD

OMEGA MODEL 2003 EB-3200-0001 CONTROLLER