4 flute drill bit for sale, brand-new and used.

SPOTTING DRILL BITS LOT OF 10 RIGHT HAND 2 FLUTE VARIOUS SIZES AND MANUFACTURERS FOR LATHE OR MILL LOT CONSISTS OF: 1X 3/4, 3X 5/8, 3X 5/16 AND 1X 1/4, 1X 7/32 AND 1X 3/16 INCH DIAMETERS OVERALL LENGTH BETWEEN 7 INCHES LONGEST AND 2 1/2 INCHES SHORTEST MIXED LOT OF NEW, USED AND RESHARPENED SOME ARE MARKED 700-B-411...... 8 ARE MARKED TRW, ACE, AND CJT AS MANUFACTURES

SPOTTING DRILL BITS LOT OF 10 RIGHT HAND 2 FLUTE VARIOUS SIZES AND MANUFACTURERS FOR LATHE OR MILL LOT CONSISTS OF: 1X 1, 1X3/4 3X 5/8, 2X 5/16, 2X 1/4 AND 1X 3/16 INCH DIAMETERS OVERALL LENGTH BETWEEN 7 INCHES LONGEST AND 3 1/8 INCHES SHORTEST MIXED LOT OF NEW, USED AND RESHARPENED SOME ARE MARKED 700-B-411...... 5 ARE MARKED TRW, SPI, ACE AND MOHAWK AS MANUFACTURES

SPOTTING DRILL BITS LOT OF 10 RIGHT HAND 2 FLUTE VARIOUS SIZES AND MANUFACTURERS FOR LATHE OR MILL LOT CONSISTS OF: 1X 1, 3X 5/8, 3X 5/16, 2X 7/32 AND 1X 3/16 INCH DIAMETERS OVERALL LENGTH BETWEEN 7 INCHES LONGEST AND 3 1/8 INCHES SHORTEST MIXED LOT OF NEW, USED AND RESHARPENED SOME ARE MARKED 700-B-411...... 4 ARE MARKED TRW AND ACE AS MANUFACTURES UNKNOWN AGE

SPOTTING DRILL BITS LOT OF 10 RIGHT HAND 2 FLUTE VARIOUS SIZES AND MANUFACTURERS FOR LATHE OR MILL LOT CONSISTS OF: 1X1, 1X 1/2, 3X 5/8, 2X 5/16, 1X 7/32 AND 2X 3/16 INCH DIAMETERS OVERALL LENGTH BETWEEN 7 INCHES LONGEST AND 3 1/4 INCHES SHORTEST MIXED LOT OF NEW, USED AND RESHARPENED SOME ARE MARKED 700-B-411...... 4 ARE MARKED TRW, ACE AND MOHAWK AS MANUFACTURES

"BEST CARBIDE" SOLID CARBIDE 1/8" (.1250) STRAIGHT FLUTE 140 DEG NOTCHED POINT DRILL BIT MADE IN THE USA! Solid Carbide Straight flute Drills 140° Notched Point PN 221-1250 OVERALL LENGTH: 1 7/8" ORIGIN: MADE IN USA ANGLE: 140 DEG SPLIT POINT DIAMETER: 1/8" DECIMAL: 0.1250 FLUTE LENGTH: 7/8" WE ARE A DISTRIBUTOR FOR BEST CARBIDE, NEED OTHER SIZES OR ANY OTHER CUTTING TO

"BEST CARBIDE" SOLID CARBIDE # 16 (.1770) STRAIGHT FLUTE 140 DEG NOTCHED POINT DRILL BIT MADE IN THE USA! Solid Carbide Straight flute Drills 140° Notched Point PN 222-1770 OVERALL LENGTH: 2 3/16" ORIGIN: MADE IN USA ANGLE: 140 DEG SPLIT POINT DIAMETER: # 16 DECIMAL: 0.1770 FLUTE LENGTH: 1 1/8" WE ARE A DISTRIBUTOR FOR BEST CARBIDE, NEED OTHER SIZES OR ANY OTHER

"BEST CARBIDE" SOLID CARBIDE 5/32" (.1562) STRAIGHT FLUTE 140 DEG NOTCHED POINT DRILL BIT LOT of 5 PIECES MADE IN THE USA! Solid Carbide Straight flute Drills 140° Notched Point Lot of 5 Pieces @ $ 8.49/ea Check out our 1 piece (Item ID 300785102075) @ $ 10.52/ea & 3 pieces (Item ID 300959977368) @ $ 9.49/ea PN 221-1562-5 OVERALL LENGTH: 2 1/16" ORIGIN: MADE IN USA ANGLE: 140 DEG SPLIT POINT DIAMETER: 5/32" DECIMAL: 0.1562 FLUTE LENGTH: 1"

"BEST CARBIDE" SOLID CARBIDE # 54 (.0550) STRAIGHT FLUTE 140 DEG NOTCHED POINT DRILL BIT MADE IN THE USA! Solid Carbide Straight flute Drills 140° Notched Point PN 222-0550 OVERALL LENGTH: 1 1/2" ORIGIN: MADE IN USA ANGLE: 140 DEG SPLIT POINT DIAMETER: # 54 DECIMAL: 0.0550 FLUTE LENGTH: 1/2" WE ARE A DISTRIBUTOR FOR BEST CARBIDE, NEED OTHER SIZES OR ANY OTHER C

New in case Hertel - Jobber Length Drill Bit-Size 1/2" Features and Benefits: • Bright provides a smooth, polished finish on the tool. It increases chip flow in softer materials such as aluminum, wood and plastic. • Solid carbide provides better rigidity than high speed steel.

Up for auction is this brand new, never used "SGS Tools" model 54116 (Series 104) Carbide Flat Drill. Drill measures 1/4"x 2" long with a 13/16" double flute. This item comes in it's original packaging.

THIS IS A LOT OF THREE DRILL BITS,LARGEST IS THREE FLUTE APPROX.1.100",2ND ONE IS FOUR FLUTE 1" & LAST ONE IS FOUR FLUTE 27/32 TAPER SHANK DRILL, 11" OAL, HS, MORSE #3, Size: 27/32",1" & 1.100" Overall Length: AROUND 11" Flute Length: 7" Shank Length: 4" Shank Top Diameter: .09380" Shank Bottom Diameter: .7780" Appears to be Morse Shank #3 3 & 4 Flutes High Speed *ALL MEASUREMENTS ARE APPROXIMATE*

Atrax End Mill Drill Bit Part# 8530069 3/32x1/8 SH C/C 4 FLT S/ Carbide SEM USA! Atrax End Mill Part# 8530069 3/32" Cutting Diameter 1/8" Shank 3/8" Cutting Depth 1-1/2" Overall length 4 Flute Carbide Square Ended BRAND NEW MADE IN USA SOLID CARBIDE

Union Butterfield 5210084 Cobalt Steel Square Nose End Mill, Inch, Long Length, Weldon Shank, Uncoated (Bright) Finish, Roughing Cut, 5 Flutes, 6.5" Overall Length, 1" Cutting Diameter, 1" Shank Diameter Product Specifications

Union Butterfield 5270086 Cobalt Steel Square Nose End Mill, Inch, Long Length, Weldon Shank, TiCN Finish, Roughing Cut, 6 Flutes, 6.5" Overall Length, 1.5000" Cutting Diameter, 1.25" Shank Diameter

Union Butterfield 5270084 Cobalt Steel Square Nose End Mill, Inch, Long Length, Weldon Shank, TiCN Finish, Roughing Cut, 5 Flutes, 6.5" Overall Length, 1" Cutting Diameter, 1" Shank Diameter Product Specifications

Niagara Cutter N79558 Cobalt Steel Square Nose End Mill, Inch, Weldon Shank, TiCN Finish, Roughing Cut, 30 Degree Helix, 6 Flutes, 5.5" Overall Length, 1.250" Cutting Diameter, 1.250" Shank Diameter