Tricks & Secrets of Old-Time Machinists: Hints and Kinks Provided by the Readers of American Machinist Magazine in 1915 and 1916, Volume 2, originally published in American Machinist Magazine, compiled, edited and published by Lindsay Publications, 2008. 5 1/2 x 8 1/2 paperback, 96 pages. ISBN 1-55918-371-3.
Tricks & Secrets of Old-Time Machinists: Hints and Kinks Provided by the Readers of American Machinist Magazine in 1915, originally published in American Machinist Magazine, compiled, edited and published by Lindsay Publications, 2009. 5 1/2 x 8 1/2 paperback, 96 pages. ISBN 1-55918-383-7.
This is a nice strong running used Dayton AC Motor marked Belt Drive Fan and Blower motor--actually was used on a wood lathe. It is model 5K258B...1/2 Horsepower 1725 RPM 60 HZ single phase 115 Volt 7.0 amp. Counter Clockwise (Left handed) rotation at shaft end Reversible Wear and tear rust dust and dirt but in good working good condition.
This is a really Super Heavy nice Live Center from a Vintage Large metal lathe. About 8 3/4" Long Tapers from about 1.05" to 1.25" at base of center has a somewhat dull point. Wear and tear rust and dust and dirt but in very good working condition.
This is a REALLY nice Vintage 6" diameter 6 Jaw Buck Chuck #3662 Made in USA in GREAT condition for age. Came from a vintage Sears Craftsman Wood Lathe. This comes complete with 2 Keys all 6 jaws and a custom plate for mounting on a lathe with a 3/4" bore clockwise mount (right handed) common to many Sears and Other Manufacturers Lathes.
This is an Indexable Tip Toolholder from a supply of 1000's of parts from a Vintage Large metal lathe kept in storage from a Metal shop that closed years ago This is a High Quality HEAVY tool--weighs over 3 pounds. Measures about 7" Long 1 1/4" X 1 1/4" The cutting end is @ 1 5/8" Tall and 1 1/2" wide. Most of these tools are considered New Old Stock NOS.Unused but not manufactured recently Minor surface rust and dust and dirt but in very good working condition.
This is an Indexable Tip Toolholder from a supply of 1000's of parts from a Vintage Large metal lathe kept in storage from a Metal shop that closed years ago This is a High Quality HEAVY tool--weighs over 4 1/2 pounds. Measures about 7" Long 1 1/2" X 1 1/2" The cutting end is @ 1 3/4" Tall and 2" wide. Most of these tools are considered New Old Stock NOS.Unused but not manufactured recently Minor surface rust and dust and dirt but in very good working condition.
Logan 10" Lathe Compound Slide Model 800 200 210 820 825 Montgomery Wards! Nice original compound assembly off a 10" Logan Lathe. Will fit Montgomery Wards 10" lathes too.
This is a boxed set of high quality Carbide tipped cutting tools from a supply of 1000's of parts from a Vintage Large metal lathe kept in storage from a Metal shop that closed years ago This is a full box of 10 about 2 1/2" Long Red colored Marked D6 Grade C5 Measure 3/8" Square. Made in Yugoslavia they say These are considered New Old Stock NOS.Unused but not manufactured recently Lots of surface rust and dust and dirt but in very good working condition.
By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.