break lathe for sale, brand-new and used.

This is a HEAVY Indexable Tip Toolholder from a supply of 1000's of parts from a Vintage Large metal lathe kept in storage from a Metal shop that closed years ago These is a High Quality HEAVY tool--weigh over 3 pounds total. Measures about 7" Long 1 1/4" X 1 1/4" The cutting end is @ 2" Tall and 1 1/2" wide. Most of these tools are considered New Old Stock NOS.Unused but not manufactured recently Minor surface rust and dust and dirt but in very good working condition.

This is a HEAVY Pair of Indexable Tip Toolholders from a supply of 1000's of parts from a Vintage Large metal lathe kept in storage from a Metal shop that closed years ago These are High Quality HEAVY tools--weigh over 6 pounds. Measures about 7" Long 1" X 1 1/2" The cutting end is @ 2 1/4" Tall and 1 1/2" wide. Most of these tools are considered New Old Stock NOS.Unused but not manufactured recently Minor surface rust and dust and dirt but in very good working condition.

This is a HEAVY Indexable Tip Toolholder as pictured from a supply of 1000's of parts from a Vintage Large metal lathe kept in storage from a Metal shop that closed years ago These is a High Quality HEAVY tool--weighs over 2 pounds total. Measures about 6" Long 1" wide and 1 1/4" tall The cutting end is @ 1 1/2" Tall and 1 1/4" wide. Most of these tools are considered New Old Stock NOS.Unused but not manufactured recently Minor surface rust and dust and dirt but in very good working condition.

This is a HEAVY Indexable Tip Toolholder from a supply of 1000's of parts from a Vintage Large metal lathe kept in storage from a Metal shop that closed years ago This is a High Quality HEAVY tool--weigh over 3 pounds. Measures about 7" Long 1" X 1 3/4" The cutting end is @ 2" Tall and 1 1/2" wide. Most of these tools are considered New Old Stock NOS.Unused but not manufactured recently Minor surface rust and dust and dirt but in very good working condition.

This is a Super HEAVY Indexable Tip Toolholder from a supply of 1000's of parts from a Vintage Large metal lathe kept in storage from a Metal shop that closed years ago These is a High Quality HEAVY tool--weigh over 5 1/2 pounds total. Measures about 9 3/8 " Long 1 1/2" X 1 1/2" The cutting end is @ 2 1/4" " Tall Overall and 1 1/2" wide.

This is a set of 4 different HEAVY Indexable Tip Toolholders from a supply of 1000's of parts from a Vintage Large metal lathe kept in storage from a Metal shop that closed years ago These are High Quality HEAVY tools--weigh over 7 pounds total. Measures about 6" Long 1" X 1" The cutting end is @ 1 5/8" Tall and 1 1/2" wide. Most of these tools are considered New Old Stock NOS.Unused but not manufactured recently Minor surface rust and dust and dirt but in very good working condition.

This is two different Carbide tipped cutting tools from a supply of 1000's of parts from a Vintage Large metal lathe kept in storage from a Metal shop that closed years ago This auction is for the 2 tools as pictured about 7" Long Silver colored Marked Fl-55 & GL-55 Grade 883 Measure 5/8" X 1 1/4" The head is larger. Made in Detroit Michigan by Metallurgical division of General Electric.

This is a pair of HEAVY Indexable Tip Toolholders from a supply of 1000's of parts from a Vintage Large metal lathe kept in storage from a Metal shop that closed years ago These is a High Quality HEAVY tool--weigh over 5 pounds total. Measures about 7" Long 1 " X 1 1/4" The cutting end is @ 1 3/4" Tall and 1 3/8"- 1 1/2" wide. Most of these tools are considered New Old Stock NOS.Unused but not manufactured recently Minor surface rust and dust and dirt but in very good working condition.

This is a pair of HEAVY Indexable Tip Toolholders from a supply of 1000's of parts from a Vintage Large metal lathe kept in storage from a Metal shop that closed years ago These is a High Quality HEAVY tool--weigh over 5 pounds total. Measures about 7" Long 1 " X 1 1/4" The cutting end is @ 1 3/4" Tall and 1 3/8"- 1 1/2" wide. Most of these tools are considered New Old Stock NOS.Unused but not manufactured recently Minor surface rust and dust and dirt but in very good working condition.

This is a HEAVY Indexable Tip Toolholder as pictured from a supply of 1000's of parts from a Vintage Large metal lathe kept in storage from a Metal shop that closed years ago These is a High Quality HEAVY tool--weigh over 3 pounds total. Measures about 7" Long 1 1/4 " X 1 1/4" The cutting end is @ 1 3/8" Tall and 1 1/4" wide. Most of these tools are considered New Old Stock NOS.Unused but not manufactured recently Minor surface rust and dust and dirt but in very good working condition.

This is a Trio of used Indexable Tip Toolholders as pictured from a supply of 1000's of parts from a Vintage Large metal lathe kept in storage from a Metal shop that closed years ago These are High Quality Measures about 5 1/2" Long 3/4 " X 3/4" Wear and Tear surface rust and dust and dirt but in OK working condition. Local Pick-up Available I may partly disassemble some items for safe economical shipping. I will combine shipping on multiple purchases when practical.

This is a used Indexable Tip Toolholder as pictured from a supply of 1000's of parts from a Vintage Large metal lathe kept in storage from a Metal shop that closed years ago These are High Quality Measures about 6" Long 3/4 " X 1" Wear and Tear surface rust and dust and dirt but in OK working condition. Local Pick-up Available I may partly disassemble some items for safe economical shipping. I will combine shipping on multiple purchases when practical.

This is a pair of HEAVY Indexable Tip Toolholders from a supply of 1000's of parts from a Vintage Large metal lathe kept in storage from a Metal shop that closed years ago These is a High Quality HEAVY tool--weigh over 5 pounds total. Measures about 7" Long 1 " X 1 1/4" The cutting end is @ 1 3/4" Tall and 1 3/8"- 1 1/2" wide. Most of these tools are considered New Old Stock NOS.Unused but not manufactured recently Minor surface rust and dust and dirt but in very good working condition.

This is a HEAVY Indexable Tip Toolholder as pictured from a supply of 1000's of parts from a Vintage Large metal lathe kept in storage from a Metal shop that closed years ago These is a High Quality HEAVY tool--weigh over 3 pounds total. Measures about 7" Long 1 " X 1 1/4" The cutting end is @ 1 3/4" Tall and 1 3/8"- 1 1/2" wide. Most of these tools are considered New Old Stock NOS.Unused but not manufactured recently Minor surface rust and dust and dirt but in very good working condition.

This is a strong running HEAVY Vintage Emerson Electric 1/3 Horse Power from a wood lathe 1/3 Horsepower Model 115 Volt 60 Hz 1725 RPM 1 phase. Thermally protected. The shaft is 1/2" diameter round with a hole toward the end and about 1 5/8" Long Rotates counter clockwise at shaft end.

This is a strong running Heavy electric motor from a NOS New OLD Stock vintage unused lathe and motor from a Sears Craftsman 12" Wood Lathe Model # 113.228160 Some dust and dirt but in very good working condition. 1/2 Horsepower single phase 1725 RPM 115 Volt 8.8 amp 60 cycle. Has a 5/8" diameter shaft with a key slot and key about 2" long overall.

This is a strong running 1/2 Horsepower Dayton Split Phase A.C. Motor from a Wood Lathe Dust and dirt wear and tear rust and pitting but in good working condition. 1/2 Horse Power 1725/1140 RPM 115 Volt 60 Cycle 8.8/5.5 amp.1 phase.

This is a strong running 1/3 Horsepower AC electric motor from a RTC wood lathe #GL-1000 Made by Taiwan Shopmaster Co. LTD. Dust and dirt wear and tear rust and pitting but in good working condition.1/3 Horse 1720 RPM 115 Volt 60 Cycle 7.5 amp made in 1988 cord has been spliced.

This is a pair of boxes of high quality Carbide tipped cutting tools from a supply of 1000's of parts from a Vintage Large metal lathe kept in storage from a Metal shop that closed years ago This is 2 full boxes of 10 each about 2 1/2" Long Red colored Marked AR6 & AL6 Grade C6 Measure 3/8" Square. These are considered New Old Stock NOS.Unused but not manufactured recently Lots of surface rust and dust and dirt but in very good working condition.

This is a Vintage Strong running 1/4 Horsepower General Electric motor from a Wood Lathe. Comes as pictured with an on/off switch mounting bracket and clips and Bolts as pictured. Has a 1/2" diameter shaft flat sided about 1 3/4" long 1/4 Horsepower 115 Volt 60 Hz 1725 RPM 5.6 amp single phase Reversible Currently wired clockwise (Right handed at shaft end).