breaker plug for sale, brand-new and used.

FOR SALE IS A USED - FULLY TESTED AND WORKING - GE SPECTRA RMS BREAKER PLUG. FOR USE WITH SFH SFL SFP BREAKERS. RATED FOR 200 AMP.

GE SPECTRA RMS P/N: SRPG600B300 PLUG, MVT + SENSOR BREAKER FREE SHIPPING APPLIES TO 48 STATES

Here is my NEMA 10-50P to 6-50R plug adaptor. It allows you to move the oven and plug in a welding machine or plasma cutter. The cord is about 6 feet long, the lines are both 6ga and the ground is 8ga, that makes it a "6/2 + 8ga" cord.

Here is my NEMA 10-30 extension cord. It allows you to reach out away from your fixed wall plug an additional 6ft. Use on clothes dryers, welders, plasma cutters, air compressor and small electric stoves.

Only have 3 prong electric range and 3 prong electric clothes dryer outlets at your house, you're not sure which one will power your new machine best and don't want to pay hundreds of dollars to have a welding machine outlet installed? Here is my special non-NEMA 10-50P and 10-30P to 6-50R plug adaptor. It allows you to plug in a welding machine or plasma cutter into a 3 prong electric range OR clothes dryer receptacle.

Wiremold Plug in 6 Power Outlet Center, R610, 120 Volts, 15 Amps, Built-in Circuit Breaker. In a good condition. Some slight white tint on the surface, but definitely does not affect using.

Here is my NEMA 14-30 clothes dryer plug to common 3 prong receptacle adaptor. This adaptor uses both lines that your hot is hot and your white wire is also hot and green is ground. This adaptor makes it so you can use a common 120 volt 3 prong extension cord to move 220 volt power from one place to another.

I HAVE FOR SALE A BRAND NEW LEVITON POWER POLE. THIS FEATURES 6 OUTLETS AND HAS A TWIST LOCK PLUG ON A HEAVY GAUGE LEAD. DOES ALSO HAVE A BREAKER BUILT-IN.

Here is my NEMA 14-30P to 6-50R welding plug adaptor. It allows you to plug a welding machine or plasma cutter with a 6-50 plug into a new style 4 prong style clothes dryer outlet. The cord is about 4 feet long, it is a "4/10ga" cord.

Have an appliance that has a cord that doesn't quite reach far enough? Don't want to pay an electrician hundreds of dollars to install another receptacle? And you have found that 4 prong extension cords aren't that easy to find?

Clearing out my garage and boxing up like things together this lot is all electrical mixed of new and used but used in working condition like a new GE countdown timer with remote new Buss Fused outlet combination switch & outlet new 2 white outlets 1 used beige outlet 1 used beige switch will find plates or covers for these 1 Leviton push on & off dimmer single pole beige GE 20 Amp Breaker GE 15 Amp Breaker both of these were installed and then changed out for different sizes new M

Here is my NEMA 14-30P to 6-50R welding plug adaptor. It allows you to plug a welding machine or plasma cutter with a 6-50 plug into a new style 4 prong style clothes dryer outlet. The cord is about 4 feet long, it is a "4/10ga" cord made by GE.

Includes HDMI cable, cable ties, surge protection and screen cleaner. 6 ft.

Here is my NEMA 10-30 extension cord. It allows you to reach out away from your fixed wall plug an additional 10ft. Use on clothes dryers, welders, plasma cutters, air compressor and small electric stoves.

Here is my extra long NEMA 10-30 clothes dryer appliance cord. It allows you to reach a 3 prong clothes dryer receptacle from a good distance with your clothes dryer or other machine. Use on clothes dryers, welders, plasma cutters, air compressor and small electric stoves.

Here is my NEMA 14-30P, NEMA 14-50 and full KVA plug to 6-50R welding plug adaptor. It allows you to plug a welding machine or plasma cutter with a 6-50 plug into new styles of 4 prongs outlet and also plugs into the "full KVA" receptacle on engine driven welder generators. The cord is 40 feet long, it is a "3/10ga SOOW 600 volt" cord.

Here is my NEMA 14-30 clothes dryer plug to 220 volt receptacle adaptor. This adaptor uses both lines that feed your clothes dryer its power. The metal housing is grounded.

XL-U Fusible Switch Plug Catalog #: UV361 Amps: 30 Volts: 600 AC System: 3?3W Standard HP: 7 1/2 Max HP: 20 ?If order is placed before 4:00 PM EST Monday-Friday -- item will ship same day!?

PM0666 ITE Gould / Siemens Model No. UA41B XL-Universal Bus Duct Magnetic Combination Starter Plug Circuit Breaker Disconnect Each item is guaranteed to be fully operational and in great condition unless otherwise noted. Includes 15A Breaker and J20A40 Control Relay 3 Phase - 4 Wire - 480 Volts Approximate Shipping Weight: 30.00 lbs Approximate Shipping Dimensions (LxWxH): 24.0