cylinder clamp for sale, brand-new and used.

Here is a lightly used presstek 4995ics four color press. This is basically a ryobi 3304HA only with a few extra bells and whistles. The unit has been lightly used and is in showroom condition.

Thousands of Used Metalworking and Plastic Machines & New Machine Tools Photos, Full Descriptions and Prices - Fast & Easy

Thousands of Used Metalworking and Plastic Machines & New Machine Tools Photos, Full Descriptions and Prices - Fast & Easy

Thousands of Used Metalworking and Plastic Machines & New Machine Tools Photos, Full Descriptions and Prices - Fast & Easy

This system was purchased a

McElroy's TracStar No.618 You are looking at a brand new McElroy TracStar No.618. This is not an older model machine (The machine is part of the newest line of McElroy's fusion equipment). The machine package includes the machine, heater, facer, heater stand, and lifting device.

PU2-TAB Double Head Routing Machine w/ Variable Router Spacing The Hoffmann PU2-TAB is a routing machine equipped with two carbide router bits to rout two dovetail slots per miter. The router bits are installed in high-speed gear heads, which are connected to separate motors with toothed drive belts. The supplied 45 degree fence plate, which is guided in a keyway in the machine table, is used to accurately position the material on the table.

Hoffmann PP-2 TAB/4 Dovetail Routing Machine The Hoffmann PP-2 TAB/4 is a routing machine equipped with four carbide router bits, two on each side. This machine is designed to rout slots for two Dovetail Keys in two workpieces simultaneously. The router bits are installed in high-speed gear heads, which are connected to separate motors with toothed drive belts.

CFS-280 Optimizing defect saw Description: 2" x 8 or 1" x 12" Cutting capacity Automatic Crosscutting Saw System suitable for cutting up to 20' long lumber; equipped with a 12" x 8' infeed and outfeed table; cuts single or multiple stacked pieces. Upcutting Cutoff Saw with cutting cycle speeds from (0.5 - 1) Sec, 18" dia. blade powered by 10 HP saw motor, drives 1" dia.

Italpresse Lamination Line Includes: Italpresse R3/160 63" Two Roller Glue Spreader (E-1-028)

2004 Wauseon 1003 End Former Three Hit Hydraulic End Former SAE J1453 ORFS Tooling for 3/8" OD Tubing SAE J533 37 Degree Double Flare Tooling for 3/8" OD Tubing Automatic Oiling System Foot Switch Designed for most endforms up to 5/8" dia. x .049 wall steel Clamp Block Opening: 1.5" Clamp Block Dimensions: 1.5"W x 2.75"H x 4"L Punch Dimensions: .9375" dia. x 2.625" max.

Unit is 6 months old / delivered in February 2015 - Very limited use 165 Ton 144" Bed Haco SRM 165-12-10 NEW PRESS BRAKE, EasyBend Graphics 2D Control 165 Ton 144" Bed Haco SRM 165-12-10 NEW PRESS BRAKE, EasyBend Graphics 2D Control NEW HACO-ATLANTIC 165 Ton x 12' "SYNCHROMASTER" HYD PRESS BRAKE SRM 165-12-10 EasyBend-2D Linux-Based Control w/Angle Programming