cylinder clamp for sale, brand-new and used.

Pre Owned 1989 Cincinnati Model 230 Autoform CNC Press Brake GENERAL SPECIFICATIONS Capacity 230 TONS Overall length of Bed & Ram 12’ Distance Between Housings ` 10’ 6 1/4” Stroke 22” Open Height 29” Closed Height 7” Throat Clearance

Thousands of Used Metalworking and Plastic Machines & New Machine Tools Photos, Full Descriptions and Prices - Fast & Easy

Unit is 6 months old / delivered in February 2015 - Very limited use 165 Ton 144" Bed Haco SRM 165-12-10 NEW PRESS BRAKE, EasyBend Graphics 2D Control 165 Ton 144" Bed Haco SRM 165-12-10 NEW PRESS BRAKE, EasyBend Graphics 2D Control NEW HACO-ATLANTIC 165 Ton x 12' "SYNCHROMASTER" HYD PRESS BRAKE SRM 165-12-10 EasyBend-2D Linux-Based Control w/Angle Programming

McElroy's TracStar No.618 You are looking at a brand new McElroy TracStar No.618. This is not an older model machine (The machine is part of the newest line of McElroy's fusion equipment). The machine package includes the machine, heater, facer, heater stand, and lifting device.

Italpresse Lamination Line Includes: Italpresse R3/160 63" Two Roller Glue Spreader (E-1-028)

Thousands of Used Metalworking and Plastic Machines & New Machine Tools Photos, Full Descriptions and Prices - Fast & Easy

Here is a lightly used presstek 4995ics four color press. This is basically a ryobi 3304HA only with a few extra bells and whistles. The unit has been lightly used and is in showroom condition.

Thousands of Used Metalworking and Plastic Machines & New Machine Tools Photos, Full Descriptions and Prices - Fast & Easy

2004 Wauseon 1003 End Former Three Hit Hydraulic End Former SAE J1453 ORFS Tooling for 3/8" OD Tubing SAE J533 37 Degree Double Flare Tooling for 3/8" OD Tubing Automatic Oiling System Foot Switch Designed for most endforms up to 5/8" dia. x .049 wall steel Clamp Block Opening: 1.5" Clamp Block Dimensions: 1.5"W x 2.75"H x 4"L Punch Dimensions: .9375" dia. x 2.625" max.

Hoffmann PP-2 TAB/4 Dovetail Routing Machine The Hoffmann PP-2 TAB/4 is a routing machine equipped with four carbide router bits, two on each side. This machine is designed to rout slots for two Dovetail Keys in two workpieces simultaneously. The router bits are installed in high-speed gear heads, which are connected to separate motors with toothed drive belts.

PU2-TAB Double Head Routing Machine w/ Variable Router Spacing The Hoffmann PU2-TAB is a routing machine equipped with two carbide router bits to rout two dovetail slots per miter. The router bits are installed in high-speed gear heads, which are connected to separate motors with toothed drive belts. The supplied 45 degree fence plate, which is guided in a keyway in the machine table, is used to accurately position the material on the table.

CFS-280 Optimizing defect saw Description: 2" x 8 or 1" x 12" Cutting capacity Automatic Crosscutting Saw System suitable for cutting up to 20' long lumber; equipped with a 12" x 8' infeed and outfeed table; cuts single or multiple stacked pieces. Upcutting Cutoff Saw with cutting cycle speeds from (0.5 - 1) Sec, 18" dia. blade powered by 10 HP saw motor, drives 1" dia.

This system was purchased a

For Sale: 2004 Vistar 80 Ton Injection Molding Machine in good running condition. Model Hydroquad 80 80 Ton, 6.4 ounce shot 14.625" x 14.625" Tie bar spacing Barber Coleman Maco 6000 Controls with color screen 480 Volt 3 phase All clamp cylinder seals replaced less than 3 months ago Currently in production. Videos are available.

Miller Dynasty 700 Tig Runner Package - Water Cooled - TIG RUNNER PACKAGE - COOLANT CIRCULATOR - COMPLETE WITH TIG TORCH, REMOTE THUMB CONTROL, WORK CABLE & CLAMP ASSY, POWER CORD INSTALLED. - MACHINE WILL BE CLEANED SOMEMORE AND RETESTED BY TECHNICIAN BEFORE SHIPPING.

Very Nice and Very Clean. Has been tested and will be re-tested prior to shipping if you buy one (quantity available). Was originally a 50 ton hand pump press.

MILLER DYNASTY 700 TIG RUNNER PACKAGE WELDER - TIG RUNNER PACKAGE - COOLANT CIRCULATOR - COMPLETE WITH TIG TORCH, REMOTE THUMB CONTROL, WORK CABLE & CLAMP ASSY, POWER CORD INSTALLED.

Selling a Challenge 15GP Proof Press. Press is in great condition and ready to print. It's been a great press for our letterpress shop but I am needing to get rid of some equipment to make room for other presses.