Wire EDM Vise And Mount Block Vise All parts are made with 420 stainless steel and hardened to 45-55 RC Vise is precision ground +/-.0002" flat/parallel. Vise will open up to almost 3.5 inches Each vise comes with a removable setup rail!!! Mount Block Made with 420 stainless steel and hardened to 45-55 RC precision ground +/- .0002 flat/parallel comes with stainless socket head cap screws for bolting together Thanks Brad B.
Wire EDM V-Block, Vise, And Mount Block All parts are made with 420 stainless steel and hardened to 45-55 RC V-block and Vise is precision ground +/-.0002" flat/parallel. Each V-block comes with a removable setup rail!!! V-block will hold up to 2.5 inch diameter or a 2.75 inch square piece.
Wire EDM V-Block And Mount Block All parts are made with 420 stainless steel and hardened to 45-55 RC V-block is precision ground +/-.0002" flat/parallel. Each V-block comes with a removable setup rail!!! V-block will hold up to 2.5 inch diameter or a 2.75 inch square piece.
Multi Position V-Block Will hold up to a two inch diameter Bottom Plate is .5 X 5 X 5 (inch) All Parts are 420 stainless steel and hardened to 48-52 RC Main V-Block can be set in three different positions. There is a straight rail that bolts to all four sides of the bottom plate for ease of removing the V-Block and setting back up. There is a low profile V-Block that can also be set in two different positions.All socket head cap screws (stainless) in picture are provided.
Wire EDM V-Block 1.5 X 5 X 5 (inch) Will hold up to a 3 inch diameter. 420 stainless steel (hardened 48-52RC) With - clamp - set up rail - stainless socket head cap screws - side rail (for standing block up or on its side) - (3) clamp screws The slotted screws are for M8 and M6 socket head caps screws they are machined 50 mm apart so these will work in any Wire EDM machine. Main Block is precision ground +/- .0002" flat/parallel
By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.