motor clamp for sale, brand-new and used.

MAZAK INTEGREX 200-3ST MULTI-AXIS CNC TURNING & MILLING CENTER General Specifications Max. swing 26" Max. swing over carriage 19.7" - 26" Note: Depends upon workpiece length, tool magazine type and Y Axis position.

2003 LG Model LGH 720M 720 Ton Injection Mold Machine, Screw Dia 4.50 in; Injector Pressure 20982 PSI; Injector Capacity 194 oz; Clamp Force 715 ton; Clamp Stroke 531 in; Motor Capacity 125 hp; Heater Cap 5630 kw, Extremely Low Hours. Machine was a display unit for NPE 2003 and has NEVER went into production. The injection half was damaged during rigging at the NPE show.

Uniloy Reciprocating Screw Blow Molder Single Head - Dual Alternating Clamps Series: Liberty Model: IS4500 New: 1995 Extruder: Diameter: 4 1/2" LD Ratio: 24:1 Shot: 3250 g. Type: Calzoni Drive Pump Motor: 200HP Capacity: 800lb p/hr. Clamp: Pressure: 60 Ton Platen: 24" x 30" Min/Max Shut: 14"/18" Tie Bars: 4 / Diameter: 3" Stroke: 54" Head: Single 8lb Electrical: 250HP; 460V; 418 Amps; 329 KVA Air: 100 PSI; 65 CFM Water: 60 PSI; 70 GPM; 35F

NEGRI BOSSI 528-TON ALL-ELECTRIC PLASTIC INJECTION MOLDING MACHINE, MODEL CANBEL VE 480-3600, 56.44 OZ (1.6 KILOS), MAN. IN 2006, DIMI EL 2000, 31.5" x 27.9.5" (800 MM x 710 MM) TBS, 46.85" x 45.28" (1190 MM x 1150 MM) PLATENS, 32.68" (830 MM) CLAMP STROKE, 66.14" (1680 MM) MAX. DAYLIGHT, 110 KW MOTOR WIRED AT 480V, DIMS: 30.68'L x 6.69'W x 7.58'H, WEIGHT: 44,000 LBS., 4,738 OPERATING HOURS ON MAY 21ST, 2013

Pre Owned 1989 Cincinnati Model 230 Autoform CNC Press Brake GENERAL SPECIFICATIONS Capacity 230 TONS Overall length of Bed & Ram 12’ Distance Between Housings ` 10’ 6 1/4” Stroke 22” Open Height 29” Closed Height 7” Throat Clearance

Thousands of Used Metalworking and Plastic Machines & New Machine Tools Photos, Full Descriptions and Prices - Fast & Easy

ARNOLD EQUIPMENT COMPANY INVENTORY #7982 - 1 - NEW 50 liter working (60 liter total/15 liter minimum working) capacity Homogenizer Mixer Turbo Emulsifier manufactured by CMX Process Technologies/Axomatic. All product contact parts to be type 316L stainless steel, mirror polished. All elastomers (including mechanical seal "O" rings) to be FDA approved Viton.

IKA Works Model DR 2000/20 Stainless Steel Dispax-Reactor Model This High Shear Dispersion Machine is suited for production of micro emulsions and very fine suspensions. On stainless steel portable stand with casters, machine is underdriven by 60 HP motor and has stainless steel control panel with Allen Bradley Digital Controller. Manufacturer rated up to 90 gallons per minute (

Thousands of Used Metalworking and Plastic Machines & New Machine Tools Photos, Full Descriptions and Prices - Fast & Easy

Espanol & English Speaking Sales Agents Available REFURBISHED 3.5” LCF SILICONE OR RUBBER EXTRUDER CFMATSUBA DC DRIVETHIS MACHINE HAS HAD A TOTAL REFURBISHMENT AND IS AVAILABLE NOW 3.5" SCREW 12:1 L/D

Thousands of Used Metalworking and Plastic Machines & New Machine Tools Photos, Full Descriptions and Prices - Fast & Easy

Unit is 6 months old / delivered in February 2015 - Very limited use 165 Ton 144" Bed Haco SRM 165-12-10 NEW PRESS BRAKE, EasyBend Graphics 2D Control 165 Ton 144" Bed Haco SRM 165-12-10 NEW PRESS BRAKE, EasyBend Graphics 2D Control NEW HACO-ATLANTIC 165 Ton x 12' "SYNCHROMASTER" HYD PRESS BRAKE SRM 165-12-10 EasyBend-2D Linux-Based Control w/Angle Programming

For sale: AM Graphics Perfect Binder With Muller Martini 3 knifeTrimmer and Stacker

Used Blow Molding Machine Made by Rocheleau Model: CS-1 Continuous Extrusion Single Head Deflash punch actuator and transfer nest mounting brackets CLAMP Tiebarless clamp design 12" Max Mold Width (Actual Platen Width 9") 13" Max Mold Height (Actual Platen Height 11") Maximum Opening: 14.75" Minimum Opening: 7.75" Mold safety bottle jam

Used Blow Molding Machine Made by Rocheleau Model: R-4 Reciprocating Screw Number of Heads: Single Head *Twin Heads are Available as well* CLAMP Usable Platen Area: 10" x 10" Maximum Opening: 20" Minimum Opening: 6" Maximum Daylight: 10" Clamp Tonnage: 5 Tons T-Square Arrangement for rapid mold installation Maximum Shot Size: 225 gram full shot capacity 1.5" Diameter Screw, 24/1 L/D Ratio 8" Stroke

Used Blow Molding Machine Made by Rocheleau Model: CS-1 Continuous Extrusion Single Head Deflash punch actuator and transfer nest mounting brackets CLAMP Tiebarless clamp design 12" Max Mold Width (Actual Platen Width 9") 13" Max Mold Height (Actual Platen Height 11") Maximum Opening: 14.75" Minimum Opening: 7.75"

Thousands of Used Metalworking and Plastic Machines & New Machine Tools Photos, Full Descriptions and Prices - Fast & Easy

ARNOLD EQUIPMENT COMPANY INVENTORY #7979 - 1 - NEW 10 liter working (12 liter total/3 liter minimum working) capacity laboratory Homogenizer Mixer Turbo Emulsifier manufactured by CMX Technologies/Axomatic. All product contact parts to be type 316L stainless steel, mirror polished. All elastomers (including mechanical seal "O" rings) to be FDA approved Viton.

ARNOLD EQUIPMENT COMPANY INVENTORY #7980 - 1 - NEW 5 liter working (7 liter total/1.5 liter minimum working) capacity laboratory Homogenizer Mixer Turbo Emulsifier manufactured by CMX Process Technologies/Axomatic. All product contact parts to be type 316L stainless steel, mirror polished. All elastomers (including mechanical seal "O" rings) to be FDA approved Viton.