These plans are to build a heavy duty sawmill. The saw is a fresh design based on a simple idea that the saw must be extremely strong, very accurate, easy to align and maintain, and cost efficient to build. It was built to cut Mesquite, a very hard wood, so it will make short order of any kind of wood you want to saw.
SHARS 5/8" Keyless drill chuck with Morse Taper 4 Integral Shank 13mm --THIS UNIT DOES NOT CLOSE DOWN TO ZERO-- -- PLEASE REVIEW CAPACITY BEFORE PURCHASE-- Product Code 202-5095A Product description Capacity: 3/32-5/8" Shank Type: Morse Taper 4 Runout: .002" Tang type Product features
SHARS 5/8" Keyless drill chuck with Morse Taper 3 Integral Shank 13mm --THIS UNIT DOES NOT CLOSE DOWN TO ZERO-- -- PLEASE REVIEW CAPACITY BEFORE PURCHASE-- 202-5094A Product description Capacity: 3/32-5/8" Shank Type: Morse Taper 3 Runout: .002" Tang type Product application Integral sha
12A201 up for sale is a large hardened drill bushing from a vintage machine shop this is marked 3 drill 62885 this unit measures 5 inch major OD at the flange the flange is 0.65 wide the OAL is 3.64 long the ID is 3 inch for a 3 inch drill the press in diameter is 4.248 OD the top flange has the traditional locking notch to hold it into the plate, we marked this used but this appears unused from USA surplus, the ID looks clean the OD and outer surfaces have a bit of surface rust.
Pacific Press Company. new 2014, 5 cubic foot Filter Press with integrated 1.5" Air Over Diaphragm Pump and Automatic Pump Controller. Pump is mounted to the press and ships in the box (not shown in pictures).
Hoffmann PP-2 TAB/4 Dovetail Routing Machine The Hoffmann PP-2 TAB/4 is a routing machine equipped with four carbide router bits, two on each side. This machine is designed to rout slots for two Dovetail Keys in two workpieces simultaneously. The router bits are installed in high-speed gear heads, which are connected to separate motors with toothed drive belts.
Nice Electric Belt furnace for heat treating, brazing, welding, annealing, deoxidation, etc. Replacement cost $30,000.00 Please call Jim for more info. 714-6121480 NR TEMP Zones: 1 MOUTH DIMENSIONS (mm) 100 x 50 H BELT SPEED : 0.5-7 Mt./Min.
Up for sale is a high quality, cnc machined stainless steel switch plate with (4) 12 volt 20 amp red led lighted switches included (also available in green and blue). Measures 4 1/4" x 2 1/4". The mounting flange on this panel is 90 degrees and measures 3/4".
By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.