0 5000 for sale, brand-new and used.

Overview The MA860H is a high performance microstepping driver based on pure-sinusoidal currentcontrol technology. Owing to the above technology and the self-adjustment technology (self-adjust current control parameters) according to different motors, the driven motors can run with smaller noise, lower heating, smoother movement and have better performances at higher speed than most of the drivers in the markets. It is suitable for driving 2-phase and 4-phase hybrid stepping motors.

· The Item is being sold AS-IS but was removed from service in a working condition, but not tested since. I have 3 total of these, but this auction is for ONE only. The description below is from the manufactures website and is a current product.

Key Features High performance, cost-effective Supply voltage up to 50DC Output current up to 4.5A Self-adjustment technology Pure-sinusoidal current control technology Pulse input frequency up to 300 KHz TTL compatible and optically isolated input Automatic idle-current reduction 16 selectable resolutions in decimal and binary, up to 51,200 steps/rev Suitable for 2-phase and 4-phase motors Support PUL/DIR and CW/CCW modes Short-voltage, over-voltage, over-current protections

Xinje 3 Phase Stepper Drive DP-508S-L DP-508S Up to 80VDC 5.0A 200Hz New

Xinje 2 Phase Stepper Drive DP504-L Up to 40VDC 5.0A 200Hz 200 Subdivision New

Leadshine 2 phase stepper motor 8.5NM 6.0A 86HS85+M542-05 2 phase stepper drive M542-05

Xinje 2 Phase Stepper Drive DP508A-L Up to 80VDC 5.0A 200Hz 200 Subdivision New

Xinje 3 Phase Stepper Drive DP-7022 Up to 220VAC 7.0A 200Hz 300 Subdivision New

Leadshine 2phase motor 4.5NM 3.0A 86HS45+M542-05 Leadshine 2phase stepper Driver M542-05

Xinje 3 Phase Stepper Drive Drive DP-7022C Up to 220VAC/336VDC 7.0A 200Hz New

The SV series servo drives are suitable for a wide range of motion applications. They are built around a powerful digital signal processor coupled to an efficient MOSFET PWM amplifier. The SV drives include up to 12 optically isolated I/O points plus analog inputs.

Brand New High Performance NEMA23 Stepper Motor CNC Driver 2M542 4.2A Controller

what's in box? 1x 34HS5435B , 1600oz-in/3.5A dual shaft 4 lead wire 1 x DM860 24V-80V DC peak current 7.8A

WHAT'S IN BOX ? 4pcs&nb

Click Here. Double your traffic. Get Vendio Gallery - Now FREE!

Minebea Astrosyn Stepper Motor Type 23KM K304 with Neugart Planetary Gearbox PLE-40-4 Available with two style gears on two shafts. 1 inch or 1/2 inch gear This is the lowe

var flashVersion = window.flashVersion ? window.flashVersion : 0;if (flashVersion

Image not availablePhotos not available for this variation Encoder 400P/R Incremental Rotary Encoder 400p/r AB phase encoder 6mm Shaft

Used Allen -Bradley Electric Motor MPL-B320-SK22AA; Series A, Max Speed 5000 RPM, KW 1.5, Continuous Stall Torque 3.05/27 Nm/LB.IN..; Continuous Amperes 0-Peak 4.50, Ambient 40 C, Volts RMS L - L460/3Phase, Res 7.0 OHMS 25C, Insulation Class 180H, PWM Source: VOLTAGE, Frequency ) - 334, Hz/Time Rating: Continuous Married with Alpha Gear Reducer - Type LP 090-M01-10-111, Ratio 10.

Allen Bradley MPL-A330P- HJ72AA servo motor series A, 230v 3 phase 5000 rpm freq. 0-333 hz Date. code 4011 US shipping only new no box