1100 300 for sale, brand-new and used.

Brand new Hamamatsu R6231 PMT Photomultiplier Tube that has been modified with a new 120 MegOhm Voltage Divider and CAP assembly with BNC connector. This setup works well with many battery operated survey meters and USB or battery powered High Voltage Bias Power Supplies. These PMTs work well with Ludlum meters, Gamma Spectacular HV Bias Drivers, and Theremino PMT adapter.

* * * Special * * * buy 4 kits, get one kit free * * * Hamamatsu R6233 PMT Photomultiplier Tube with Voltage Divider Kit, BNC Connector and Silicone Coupling Compound. This PMT KIT comes with everything you need to modify it with a modern resistor network. Once modified and combined with a scintillator, these PMTs make an excellent detector for use with Ludlum meters, Gamma Spectacular HV Bias Drivers, and Theremino PMT adapter.

* * * Special * * * buy 4, get one free * * * Hamamatsu R6233 PMT Photomultiplier Tube that has been modified with a new 120 MegOhm Voltage Divider and CAP assembly with BNC connector. This setup works well with many battery operated survey meters and USB or battery powered High Voltage Bias Power Supplies. These PMTs work well with Ludlum meters, Gamma Spectacular HV Bias Drivers, and Theremino PMT adapter.

* * * Special * * * buy 4, get one free * * * Hamamatsu R6233 PMT Photomultiplier Tube that has been modified with a new 120 MegOhm Voltage Divider and wire Leads. This setup works well with many battery operated survey meters and USB or battery powered High Voltage Bias Power Supplies. These PMTs work well with Ludlum meters, Gamma Spectacular HV Bias Drivers, and Theremino PMT adapter.

Super nice Hamamatsu R10133 PMT Photomultiplier Tube. This listing is for a PMT with the original Hamamatsu Voltage divider network replaced by a voltage divider

Super nice Hamamatsu R10133 PMT Photomultiplier Tube. This listing is for a PMT with the original Hamamatsu Voltage divider network installed, but comes with my

Super nice 2" Hamamatsu R10131 PMT Photomultiplier Tube. This listing is for a PMT with the original Hamamatsu Voltage divider network replaced by a voltage divider for more common use in stand alone scintillator detectors. I then add a Cap and BNC connector so that it is ready to use with a scintillator crystal of your choice.

Super nice 2" Hamamatsu R10131 PMT Photomultiplier Tube. This listing is for a PMT with the original Hamamatsu Voltage divider network replaced by a voltage divider for more common use in stand alone scintillator detectors. These PMTs make an excellent detector for use with Ludlum meters, Gamma Spectacular HV Bias Drivers, and Theremino PMT adapter.

Super nice 2" Hamamatsu R10131 PMT Photomultiplier KIT. This listing is for a PMT Kit with the original Hamamatsu Voltage divider network already removed (so you do not need to do any desoldering). It comes with all the electronics, connector, wire leads, BNC connector and my fully illustrated instructions for adding a voltage divider network for more common use.

Super nice 2" Hamamatsu R10131-02 PMT Photomultiplier Tube. This listing is for a PMT with the original Hamamatsu Voltage divider network installed. The PMT comes with the Hamamatsu R10131 Data Sheet and comes with my fully illustrated instructions for modifying the Voltage Divider for more common use.

Hamamatsu R6231 2" PMT Photomultiplier Tube with Voltage Divider Kit, BNC Connector and Silicone Coupling Compound. This PMT KIT comes with everything you need to modify it with a modern resistor network. Once modified and combined with a scintillator, these PMTs make an excellent detector for use with Ludlum meters, Gamma Spectacular HV Bias Drivers, and Theremino PMT adapter.

Hamamatsu R6231 2" PMT Photomultiplier Tube, When modified and combined with a scintillator, these PMTs make an excellent detector for use with Ludlum meters, Gamma Spectacular HV Bias Drivers, and Theremino PMT adapter. These work great with plastic scintillators, but they are high resolution PMTs, so combining with a spectrometry quality scintillator crystal will provide a great detector for gamma spectrometry use.

* * * ATTENTION PLEASE * * * Purchases will not be shipped until 12/21/14. NEW AND IMPROVE

Thousands of Used Metalworking and Plastic Machines & New Machine Tools Photos, Full Descriptions and Prices - Fast & Easy

Gold International Machinery Corporation GOLDMACHINERY.COM | DGOLD@GOLDMACHINERY.COM

SIP MODEL 620 2 AXIS CNC JIG BORER S/N: 608/913 TRAVELS: Working Table travel: 40” (1000mm) Spindle head travel: 28” (700mm) Hydrostatic spindle quill travel: 12” (300mm) Vertical traverse of cross-rail: 30 3/4 ” (780mm) WORKING ENVELOPE: Free space between uprights: approx. 43 1/4 ” (1100mm) Distance from table top to spindle end: 40” (1000mm) Working Table surface: 43 1/4 ” X 33” (1100 X 842mm) Table height: 37” (940mm) Maximum load: 3,300 lbs. (1500 kg) Milling feeds: .05 to 240 in/min.