3/4 steel plate for sale, brand-new and used.

Barnstead Super Nuova SP131820-33 7x7 Hot Plate Stirrer Thermo Scientific 220-240 Volt This unit uses non-standard voltage (220-240). I've included pictures of the plugs. 7" X 7"Width 8.2” (20.8 cm)Height 3.8” (9.7 cm)

This is a USED 1-5/8"x6"x6"x8" Precision Steel Angle Plate with a wood storage box. There are 121 3/8"-16 tapped holes on the face, and the holes on the sides are tapped 1/4"-20. This is a very, very unique angle plate with all these holes and the plate is hardened!

lab-line_4625_4_plate_titer_plate_shaker Policies

This unit was recently removed from a restaurant that closed. It has been cleaned and tested. It runs on Natural Gas but can be converted to LP if needed.

Thank You For Looking At Our Products Product Information:Suburban Tool Permanent Magnetic Compound Sine PlateSeries S1 w/ Sine Plate Product Features & Specifications:Permanent Magnetic Sine Plate

Click Here. Double your traffic. Get Vendio Gallery - Now FREE!

The Star Max 536CHSF 36" electric countertop griddle with chrome plate snap-action thermostatic controls heats evenly and delivers superior performance no matter what you're cooking! Its polished chrome griddle plate reflects heat inward, reducing radiant heat lost into the kitchen and lowering energy consumption! This polished chrome plated surface also eliminates food taste transfer and is much easier to clean than standard steel griddle surfaces--saving you time and money.

CMA-180UC-COMMERCIAL-UNDERCOUNTER-DISHWASHER This is a CMA 180UC Commercial Undercounter Dishwasher. It operates on a 50 amp 3 wire electrical system, 200-230- 110v, with neutral and ground. It is NSF certified and washes 1 dishrack every 2 minutes.

The Thermolyne Nuova II Hot Plate/Stirrer model SP18425 space saving low profile design hot/plate stirrer, sturdy die cast aluminum case provides solid support to the 7 inch square porcelain coated stainless steel top plate. Solid state speed control gives consistent resul

You are buying a universal leveling plate for Ultrasonic Welding Machine. It levels the part on top of the base for higher accuracy when the horn is applied. The Leveling Plate fits most stand up ultrasonic welders including Branson, Hermann and Others.

American Metalcraft SCRACK5 Aluminum Cart for Plate Covers This American Metalcraft plate cover cart features an aluminum base with five casters. It includes a steel screw-in bar and holds up to 175 plate covers. Additional Information: Material: Aluminum Capacity: 175 Plate Covers Height: 40-1/4" Diameter: 20" Model #: SCRACK5

Installed in a process chiller but never used, very clean, perfect condition, 34 plate stainless steel brazed plate heat exchanger, built 2011, 20-3/4" tall X 4-7/8"wide X 3-1/2" stack thickness, label is damaged from removal of insulation, compatible with all group 1 refrigerants, refrigerant connections are 7/8" sweat o.d. in 1-1/8" sweat o.d. out, liquid connections are 1" male B.T.P.

The Detex Grade 3 ECL-230D-PH is a Long Bar Exit Control Lock (deadbolt) is not only easy to install, but provides straightforward operation that everyone understands. The ECL-230 is a code compliant, battery alarmed, rugged dead bolt, panic device with steel plate and photo luminescent sign providing managed security and a 100 decibel alarm for secondary exits. Rim Cylinder and bar guard sold separately.

12" ROUGH CASTING ADAPTER TYPE 304 - BISON For & Plain Back Lathe Chucks Applications Type 334 Camlock Spindle Adapter For 3 jaw plain black chucks. Direct mounting on Camlock spindle noses. Type 309 Semi-Machined Spindle Adapter For 3 jaw plain back chucks with spotted holes for A1 & A2 spindle holes.

12" L1 CAST IRON FULLY MACHINED ADAPTER - BISON For & Plain Back Lathe Chucks Applications Type 334 Camlock Spindle Adapter For 3 jaw plain black chucks. Direct mounting on Camlock spindle noses. Type 309 Semi-Machined Spindle Adapter For 3 jaw plain back chucks with spotted holes for A1 & A2 spindle holes.

12" D1-11 CAST IRON MACHINED ADAPTER - BISON For & Plain Back Lathe Chucks Applications Type 334 Camlock Spindle Adapter For 3 jaw plain black chucks. Direct mounting on Camlock spindle noses. Type 309 Semi-Machined Spindle Adapter For 3 jaw plain back chucks with spotted holes for A1 & A2 spindle holes.

Top Seller, Great customer service by phone. Shipping fee is NOT taxable = save sales tax. (Free shipping charges more sales tax) If you pick up locally, no shipping fee is applied.