6 in c clamp for sale, brand-new and used.

Box of 10 Tyco Power-Strut PS 858 1/2 EG Heavy Duty Beam Clamp (1/2" Rod Size)

Fluke 1587/MDT Advanced Motor Drive Troubleshooting Kit. This kit is in perfect working condition. No signs of wear or use.

(On Products over $75) Fluke 381 Remote Display True-rms AC/DC Clamp Meter with 18-inch iFlex New - Factory Authorized Distributor - Factory Warranty Range: 1000 A AC/DC Diameter of Measurable Conductor: 1.3A‚A” or 34 mm max Ope

You are purchasing 1 - HUBBELL 5100P9W Locking Pin & Sleeve Plug 100 amp 4 Pole 5 Wire 3 Phase -

KREG JIG MASTER SYSTEM KREG MODEL: K4MS NEW IN BOX! Kreg Jig® Master System ITEM # K4MS Removable Drill Guide for use

You are purchasing 1 - Hubbell HBL520C9W 20 Amp 120/208 Volt, 3 Phase, 4 Pole, 5 Wire Watertight Female Connector 520C9W IEC309 AC Pin & Sleeve NEW!!!

(On Products over $75) Lascar EL-USB-ACT AC and DC Millivolt Current and Voltage Data Logger with Current Clamp Input New - Factory Authorized Distributor - Factory Warranty Compatible with a.c. and d.c. current clamps Energy monitoring mode (to calcul

var flashVersion = window.flashVersion ? window.flashVersion : 0;if (flashVersion

Amprobe ACD-41PQ 1000A Power Quality Clamp Meter with Tempe

FLUKE 319 new clamp Meter true-rms Inrush Current 100ms Introduction Fluke 317/319 Digital Clamp Meter provides higher accuracy current measurement,The accuracy of AC is increased from 1.9% to 1.5% , The accuracy of DC is increased from 2.5%

Amprobe ACD-16 TRMS-PRO 1000A Data Logging Clamp Meter with

1. Introduction Safe and Time Saving Traditional phase sequence measurement methods must poke the three-phase wire terminal, and connect the three bare alligator clips or test pins of phase sequence meters to the three bare firing lines, while ETCR1000D uses clamp non-contact measurement, without taking off the wire and no need to contact high-voltage bare fire-wire, the test can be made by directly clamping the three-ph

BRAND NEW Fieldpiece Superheat and Subcooling Accessory for Air Conditioning, Model ASX14 Specifications: ~ Operating environment: 32?F to 122?F; 0?C to 50?C at <75%RH ~Allow ~5 min. for ASX14 to come to ambient temp. ~Storage environment: -4?F to 140?F; -20?C to 60?C at <80%RH with battery removed.

var itemNumber = window.ebayItemID ?

6 HDL PROTO EXTRA HEAVY DUTY C-CLAMP 0-6-5/8"