7.5 of 10000 for sale, brand-new and used.

Characteristic data Operating voltage 10...30 V DC Connection Connector, M12x1-S04 Switching freq. f max. 10000 Hz Indicator Ready - LED GN Duration of time function 20 ms Input function Same function as key Setting Contrast (switching point), Key lock on/off, Time function on/off, Lighton/ dark-on, Switching output PNP/NPN Time function Turn-off delay Adjuster Key (2x)/Slide switch (3x) Short-circuit protected Yes Protected against polarity reversal Yes Encl

3MD560 Leadshine 3 Phase 8.4A 1-axis Stepping Motor Driver

EPC - Series 725, 10,000 PPR, 3/8" Shaft Size, Side Connector, A & B Quadrature Line Driver Output, and 7-Pin MS Style Connector. EPC - Incremental Encoder Connector / Cable Assembly, 15 Meters Long, Non CE.

725N-S-S-10000-Q-HV-5-S-N-SYNN EPC - Series 725, 10,000 PPR, 3/8" Shaft Size, Side Connector, A & B Quadrature Line Driver Output, and 7-Pin MS Style Connector.

Overview The MA860H is a high performance microstepping driver based on pure-sinusoidal currentcontrol technology. Owing to the above technology and the self-adjustment technology (self-adjust current control parameters) according to different motors, the driven motors can run with smaller noise, lower heating, smoother movement and have better performances at higher speed than most of the drivers in the markets. It is suitable for driving 2-phase and 4-phase hybrid stepping motors.

Key Features High performance, cost-effective Supply voltage up to 50DC Output current up to 4.5A Self-adjustment technology Pure-sinusoidal current control technology Pulse input frequency up to 300 KHz TTL compatible and optically isolated input Automatic idle-current reduction 16 selectable resolutions in decimal and binary, up to 51,200 steps/rev Suitable for 2-phase and 4-phase motors Support PUL/DIR and CW/CCW modes Short-voltage, over-voltage, over-current protections

MICROSTEPPING VDC/ LEADSHINE DRIVER 3-PHASE 50 8.3A 5.9A) (RMS 3ND583

DRIVER 8.3A 3ND583 5.9A) LEADSHINE MICROSTEPPING (RMS 50 VDC/ 3-PHASE

Leadshine 2 phase stepper motor 8.5NM 6.0A 86HS85+DMA860H 2 phase drive 24-80DCV New original brand DMA860H Description

Xinje 3 Phase Stepper Drive DP-508S-L DP-508S Up to 80VDC 5.0A 200Hz New

Xinje 2 Phase Stepper Drive DP504-L Up to 40VDC 5.0A 200Hz 200 Subdivision New

Leadshine 2 phase stepper motor 8.5NM 6.0A 86HS85+M542-05 2 phase stepper drive M542-05