conveyor roller assembly for sale, brand-new and used.

You are considering a Hytrol RB Series, Roller Bed Type Powered Belt Conveyor. This conveyor is used, but is in good overall condition. Shows normal wear, scratches etc.

&nbs

AndBio Call Us at: (888) 642-6431

Genuine U.S. Military Issue Surplus   Federal Equipment Company - Conveyor Roller Chain Assembly P/N: C220191 This part cross-references to the following....  Engineered Systems and Development P/N: LK2948D43A1A2A3 Link-Belt Div. of FMC Corp.

Hartness CTS-30 Top Hot Glue Case Sealer Model #CTS-30 Serial #17011 Nordson 3400 Glue System with 2 hoses and glue guns Top Sealer Adjustable case size Top Compression roller assembly on discharge 8’ Long powered conveyor for full case carry through Full flap control E-Stop Divelbiss controller / interface Electrical 230/460 Volt / 60 Hz / 3 Phase

DOBOY MODEL SW 100W SLEEVE WRAPPER (POLY-SHRINK), 38" WIDE SEALING BAR, 10" WIDE BELT X 36" LONG RIGHT ANGLE INFEED CONVEYOR, MECHANICAL PRODUCT RA RAM, POWERED TOP & BOTTOM FILM FEED (BOTTOM MISSING FRAME & ROLLER ASSEMBLY), ALLEN BRADLEY SLC150 CONTROLLER, 1 HP GEARHEAD PRODUCT RAM, TEMPERATURE CONTROLS, AC SPEED CONTROLS FOR RAM & CONVEYOR. PRESENTLY RUNNING DUAL FILM ROLLS TOP & BOTTOM. DOBOY MODEL LF 100M SHRINK TUNNEL, 4-FT.

used salvaged part --- drum is 13 inches in length --diameter is 4 1/2 --1 inch bearings turn freely -good part

ECKELS-BILT, INC CONVEYOR BELT TRACKING SYSTEM MODEL: 2006 HDIJ *CURRENTLY MODEL 2007 HDIJ ACCORDING TO MANUFACTURER* 3 STAINLESS STEEL ROLLERS MEASURING APPROXIMATELY 32" X 2 3/4" FOR BELTS UP TO 80" WIDE SPARE PARTS LIST:

Vibra-TITE 12110 Medium Strength (Removable) Threadlocker is a general purpose product. 121 will hold all metric, imperial or conventional sized nuts and bolts, meeting the requirements of over 80% of fastening applications. It does not run off or drip and does not migrate after assembly due to its thixotropic chemistry.

Genuine U.S. Military Issue Surplus Federal Equipment Company - Conveyor Roller Chain Assembly - P/N: C220191 (NOS) (NOS) = New Old Stock P/N: C220191 This part cross-references to the following.... Engineered Systems and Development P/N: LK2948D43A1A2A3 Link-Belt Div.

Hartness Hot Glue Top Case Sealer - Model Number CTS-30 - Serial Number 17-168 - Manufacturer: Hartness International, Greenville SC - Top Case Sealer - Adjustable for various size RSC corrugated cases - Top Compression Roller assembly on discharge 42” long - 8’ Long Rough Belt Powered Conveyor for Full Case Carry Through - Full Flap Control - Rear Flap Kicker Arm/Minor Flap Tucker-Closer - Nordson 3400 Glue System with 2 ho