conveyor roller assembly for sale, brand-new and used.

&nbs

Hartness Hot Glue Top Case Sealer - Model Number CTS-30 - Serial Number 17-168 - Manufacturer: Hartness International, Greenville SC - Top Case Sealer - Adjustable for various size RSC corrugated cases - Top Compression Roller assembly on discharge 42” long - 8’ Long Rough Belt Powered Conveyor for Full Case Carry Through - Full Flap Control - Rear Flap Kicker Arm/Minor Flap Tucker-Closer - Nordson 3400 Glue System with 2 ho

Genuine U.S. Military Issue Surplus Federal Equipment Company - Conveyor Roller Chain Assembly - P/N: C220191 (NOS) (NOS) = New Old Stock P/N: C220191 This part cross-references to the following.... Engineered Systems and Development P/N: LK2948D43A1A2A3 Link-Belt Div.

AndBio Call Us at: (888) 642-6431

Originally paid $20,000 for this machine and have used it for about 1.5 years. It's actually performs better than when we bought it. Aside from regular maintenance, we have replaced a worn drive sprocket and a roller assembly for the outfeed conveyor.

DOBOY MODEL SW 100W SLEEVE WRAPPER (POLY-SHRINK), 38" WIDE SEALING BAR, 10" WIDE BELT X 36" LONG RIGHT ANGLE INFEED CONVEYOR, MECHANICAL PRODUCT RA RAM, POWERED TOP & BOTTOM FILM FEED (BOTTOM MISSING FRAME & ROLLER ASSEMBLY), ALLEN BRADLEY SLC150 CONTROLLER, 1 HP GEARHEAD PRODUCT RAM, TEMPERATURE CONTROLS, AC SPEED CONTROLS FOR RAM & CONVEYOR. PRESENTLY RUNNING DUAL FILM ROLLS TOP & BOTTOM. DOBOY MODEL LF 100M SHRINK TUNNEL, 4-FT.

Vibra-TITE 12110 Medium Strength (Removable) Threadlocker is a general purpose product. 121 will hold all metric, imperial or conventional sized nuts and bolts, meeting the requirements of over 80% of fastening applications. It does not run off or drip and does not migrate after assembly due to its thixotropic chemistry.

The shipping cost is indicative (it will be increased or reduced accordingly on the destination) The details of the machine is the following: A correct flow of materials, whether semi-finished or finished products, or parts in the assembly phase, plays an important role in rationalizing and optimizing the production cycle. The Emmegi Logistics line offers companies a concrete solution to all storage, handling and assembly problems. Roto is a vertical wrapping machine for doors and windows.

ECKELS-BILT, INC CONVEYOR BELT TRACKING SYSTEM MODEL: 2006 HDIJ *CURRENTLY MODEL 2007 HDIJ ACCORDING TO MANUFACTURER* 3 STAINLESS STEEL ROLLERS MEASURING APPROXIMATELY 32" X 2 3/4" FOR BELTS UP TO 80" WIDE SPARE PARTS LIST:

You are considering a Hytrol RB Series, Roller Bed Type Powered Belt Conveyor. This conveyor is used, but is in good overall condition. Shows normal wear, scratches etc.

used salvaged part --- drum is 13 inches in length --diameter is 4 1/2 --1 inch bearings turn freely -good part

DOBOY MODEL SW 100W SLEEVE WRAPPER (POLY-SHRINK), 38" WIDE SEALING BAR, 10" WIDE BELT X 36" LONG RIGHT ANGLE INFEED CONVEYOR, MECHANICAL PRODUCT RA RAM, POWERED TOP & BOTTOM FILM FEED (BOTTOM MISSING FRAME & ROLLER ASSEMBLY), ALLEN BRADLEY SLC150 CONTROLLER, 1 HP GEARHEAD PRODUCT RAM, TEMPERATURE CONTROLS, AC SPEED CONTROLS FOR RAM & CONVEYOR. PRESENTLY RUNNING DUAL FILM ROLLS TOP & BOTTOM. DOBOY MODEL LF 100M SHRINK TUNNEL, 4-FT.

Hartness CTS-30 Top Hot Glue Case Sealer Model #CTS-30 Serial #17011 Nordson 3400 Glue System with 2 hoses and glue guns Top Sealer Adjustable case size Top Compression roller assembly on discharge 8’ Long powered conveyor for full case carry through Full flap control E-Stop Divelbiss controller / interface Electrical 230/460 Volt / 60 Hz / 3 Phase